Bug#493865: Bug booting from console
Package: installation-reports
Boot method: CD , CD-netinst, CD-weekly-image
Image version: <Full URL to image you downloaded is best>
Date: 5/Aug/2008
Machine: Xserve G5 Dual 2Ghz PowerPC
Processor: G5
Memory: 4Gb
Partitions:
Output of lspci -knn (or lspci -nn):
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
I'm trying to install lenny/beta2 on an headless xserveG5.
The install cd kernel find the serial device Zilog /ttyPZ0-PZ1 but the kernel want only the ttyS0 device as shown below.
###################################################################################
###################################################################################
###################################################################################
boot: install64 console=ttyPZ0,57600n8
Please wait, loading kernel...
Elf64 kernel loaded...
Loading ramdisk...
ramdisk loaded at 01b00000, size: 4259 Kbytes
OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020
command line: ro ramdisk_size=10240 -- console=ttyPZ0,57600n8
memory layout at init:
alloc_bottom : 0000000001f29000
alloc_top : 0000000030000000
alloc_top_hi : 0000000180000000
rmo_top : 0000000030000000
ram_top : 0000000180000000
Looking for displays
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x000000000232a000 -> 0x000000000232b35f
Device tree struct 0x000000000232c000 -> 0x000000000233f000
Calling quiesce ...
DO-QUIESCE finishedreturning from prom_init
Hello World !
Starting Linux PPC64 #1 SMP Sat May 10 20:57:22 UTC 2008
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x100000000
htab_address = 0xc00000017c000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Linux version 2.6.24-1-powerpc64 (Debian 2.6.24-7) (dannf@debian.org) (gcc versi8
CF000012
Setup Arch
[boot]0012 Setup Arch
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=210, gen1=209
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Zone PFN ranges:
DMA 0 -> 1572864
Normal 1572864 -> 1572864
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 524288
0: 1048576 -> 1572864
CF000015
Setup Done
[boot]0015 Setup Done
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027072
Policy zone: DMA
Kernel command line: ro ramdisk_size=10240 -- console=ttyPZ0,57600n8
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
PID hash table entries: 4096 (order: 12, 32768 bytes)
clocksource: timebase mult[7800001] shift[22] registered
Console: colour dummy device 80x25
serial8250_console_init: nothing to do on PowerMacüconsole handover: boot [udbg0]
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
freeing bootmem node 0
Memory: 4013340k/4194304k available (4540k kernel code, 180964k reserved, 744k d)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
smp_core99_probe
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
channel 0 bus <multibus>
PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
Processor timebase sync using Pulsar i2c clock
mpic: requesting IPIs ...
smp_core99_kick_cpu
smp_core99_kick_cpu done
Processor 1 found.
Brought up 2 CPUs
core99_setup_cpu 0 done
net_namespace: 120 bytes
NET: Registered protocol family 16
Linux ppc64
#1 SMP Sat May 10 20:57:22 UTC 2008
CPU Hotplug not supported by firmware - disabling.
IOMMU table initialized, virtual merging enabled
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: timebase clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4259k freed
nvram_init: Could not find nvram partition for nvram buffered error logging.
Registering G5 CPU frequency driver
Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
Low: 1800 Mhz, High: 2000 Mhz, Cur: 1800 MHz
audit: initializing netlink socket (disabled)
audit(1217939112.140:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
AMD8131 rev 12 detected, disabling PCI-X MMRBC
AMD8131 rev 12 detected, disabling PCI-X MMRBC
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
MacIO PCI driver attached to K2 chipset
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39
hda: QSI CD-ROM TCR-241, ATAPI CD/DVD-ROM drive
hda: MWDMA2 mode selected
ide0 at 0xd0000800822f2000-0xd0000800822f2007,0xd0000800822f2160 on irq 39
ohci_hcd 0001:02:0b.0: OHCI Host Controller
ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0001:02:0b.1: OHCI Host Controller
ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 2
ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
swsusp: Registered nosave memory region: 000000007f000000 - 0000000080000000
registered taskstats version 1
input: PMU as /class/input/input1
Freeing unused kernel memory: 268k freed
cttyhack: can't open '/dev/ttyS0': No such device or address
cttyhack: can't open '/dev/ttyS0': No such device or address
cttyhack: can't open '/dev/ttyS0': No such device or address
cttyhack: can't open '/dev/ttyS0': No such device or address
cttyhack: can't open '/dev/ttyS0': No such device or address
cttyhack: can't open '/dev/ttyS0': No such device or address
#############################################################################
#############################################################################
#############################################################################
#############################################################################
boot: install64 text console=ttyS0,57600n8
Please wait, loading kernel...
Elf64 kernel loaded...
Loading ramdisk...
ramdisk loaded at 01b00000, size: 4259 Kbytes
OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020
command line: ro ramdisk_size=10240 -- text console=ttyS0,57600n8
memory layout at init:
alloc_bottom : 0000000001f29000
alloc_top : 0000000030000000
alloc_top_hi : 0000000180000000
rmo_top : 0000000030000000
ram_top : 0000000180000000
Looking for displays
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x000000000232a000 -> 0x000000000232b349
Device tree struct 0x000000000232c000 -> 0x000000000233f000
Calling quiesce ...
erasing fff04000 of Micron B1 part
flashing fff04000 of Micron B1 part
swapping blocks
DO-QUIESCE finishedreturning from prom_init
Hello World !
Starting Linux PPC64 #1 SMP Sat May 10 20:57:22 UTC 2008
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x100000000
htab_address = 0xc00000017c000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Linux version 2.6.24-1-powerpc64 (Debian 2.6.24-7) (dannf@debian.org) (gcc versi8
CF000012
Setup Arch
[boot]0012 Setup Arch
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
via-cttyhack:pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=208, gen1=207
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Zone PFN ranges:
DMA 0 -> 1572864
Normal 1572864 -> 1572864
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 524288
0: 1048576 -> 1572864
CF000015
Setup Done
[boot]0015 Setup Done
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027072
Policy zone: DMA
Kernel command line: ro ramdisk_size=10240 -- text console=ttyS0,57600n8
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
PID hash table entries: 4096 (order: 12, 32768 bytes)
clocksource: timebase mult[7800001] shift[22] registered
Console: colour dummy device 80x25
serial8250_console_init: nothing to do on PowerMac
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
freeing bootmem node 0
Memory: 4013340k/4194304k available (4540k kernel code, 180964k reserved, 744k d)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
smp_core99_probe
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
channel 0 bus <multibus>
PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
Processor timebase sync using Pulsar i2c clock
mpic: requesting IPIs ...
smp_core99_kick_cpu
smp_core99_kick_cpu done
Processor 1 found.
Brought up 2 CPUs
core99_setup_cpu 0 done
net_namespace: 120 bytes
NET: Registered protocol family 16
Linux ppc64
#1 SMP Sat May 10 20:57:22 UTC 2008
CPU Hotplug not supported by firmware - disabling.
IOMMU table initialized, virtual merging enabled
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: timebase clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4259k freed
nvram_init: Could not find nvram partition for nvram buffered error logging.
Registering G5 CPU frequency driver
Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
Low: 1800 Mhz, High: 2000 Mhz, Cur: 1800 MHz
audit: initializing netlink socket (disabled)
audit(1213293315.136:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
AMD8131 rev 12 detected, disabling PCI-X MMRBC
AMD8131 rev 12 detected, disabling PCI-X MMRBC
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
MacIO PCI driver attached to K2 chipset
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39
hda: QSI CD-ROM TCR-241, ATAPI CD/DVD-ROM drive
hda: MWDMA2 mode selected
ide0 at 0xd0000800822f2000-0xd0000800822f2007,0xd0000800822f2160 on irq 39
ohci_hcd 0001:02:0b.0: OHCI Host Controller
ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0001:02:0b.1: OHCI Host Controller
ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 2
ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
swsusp: Registered nosave memory region: 000000007f000000 - 0000000080000000
turn off boot console udbg0
##########################################################################################
##########################################################################################
So I can't install.
Thanks for all
--
Amministratore unico
Czero s.r.l.
Via Tommaso Gulli, 60 - 20147 Milano (MI)
PI/CF: 05985960961
Mobile: 349 197 8810
------------------------------------
Le informazioni contenute nella presente e-mail e nei documenti eventualmente allegati possono essere confidenziali e sono comunque riservate al destinatario della stessa. La loro diffusione, distribuzione e/o copiatura da parte di terzi è proibita.
Se avete ricevuto questa comunicazione per errore, Vi preghiamo di eliminarla e informare immediatamente il mittente del messaggio. L?interessato può, inoltre, esercitare tutti i diritti di accesso sui propri dati previsti dall?art.7 del Dlgs. n. 196/2003, tra i quali i diritti di rettifica, aggiornamento e cancellazione.
------------------------------------
Reply to: