Bug#493720: Installation Report
Package: installation-reports
Boot method: network PXE
Image version: Daily build image 2008-08-03
Date: 2008-08-04
Machine: Notebook ASUS M6Ne
Processor: Pemtium M 1,6GHz
Memory: 512MB
Partitions:
RBG-NB:/home/bernhard# df -Tl
Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/hda7 ext3 10317828 3854124 5939588 40% /
tmpfs tmpfs 257868 0 257868 0% /lib/init/rw
udev tmpfs 10240 120 10120 2% /dev
tmpfs tmpfs 257868 0 257868 0% /dev/shm
/dev/hda8 ext3 30961664 182372 29206532 1% /home
/dev/hda6 fuseblk 1052224 7818 1044406 1% /share
Output of lspci -knn (or lspci -nn):
RBG-NB:/home/bernhard# lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 21)
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 21)
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83)
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03)
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03)
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50]
Kernel modules: radeonfb
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03)
Kernel driver in use: tg3
Kernel modules: tg3
02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:01.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:01.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 04)
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)
Kernel driver in use: ipw2200
Kernel modules: ipw2200
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
The installation was done with preseed.
The configuration file is at the attachement.
The problem is the german keyboard layout.
To select the german keyboard layout, the following bootparameter is used: "console-keymaps-at/keymap=de"
With this parameter, the installer don't asks for keyboard layout.
But the german keyboard layout is not set.
Without the bootparameter "console-keymaps-at/keymap=de", the installer asks for keyboard layout.
If german keyboard layout is chosen, the german keyboard layout is set correctly.
The behaviour with the Beta2 installer from 2008-05-22 is OK.
If you have further questions, please let me know.
Regards
Bernhard
label install
menu label ^Install
menu default
kernel debian-installer/i386/linux
append vga=normal initrd=debian-installer/i386/initrd.gz fb=false preseed/url=ftp://192.168.2.1/lenny.preseed debian-installer/locale=de_DE console-keymaps-at/keymap=de netcfg/get_domain=StrikeForce -- quiet
Reply to: