Package: installation-reports Version: 2.38 Severity: normal Sorry about the aborted attempt earlier -- please close that one. Here's a second attempt... I originally wanted to try installing Lenny on an 8GB thumb drive. But it failed repeatedly during the "installing basic software" phase with the thumb drive going "read only". I suspected that the thumb drive was being driven harder than it's design spec and over heating on me. I'll try again some other day with a different type of thumb drive. Another thing I could try is use "ext2" instaead of "ext3" filesystems on the thumb drive, and using "noatime" or "relatime" options. Journaling on a flash-based media is reported to be a bad idea due to the increased number of media writes per user I/O operation. But that's a project for another day... In order to get it working, I installed to an 80GB USB hard drive. That installation was entirely nominal, with no surprises. One thing worth mentioning though: I have a full-service DHCP on this subnet, so it got the network parameters from DHCP. This was successful, but for some reason it decided that the DNS domain was "example.org", not the one being offered by DHCP. The text "example.org" showed up in the following places: /etc/network/interfaces /etc/hosts it may also have shown up in the exim4 configuration file, but after changing it in the two above places, I did "dpkg-reconfigure exim4-config" and that was fixed. Let me know if you would like to look at the log files or if there is any other way I can help. -- Package-specific info: Boot method: following instructions from http://www.cyrius.com/debian/nslu2/ Image version: http://www.slug-firmware.net/d-click.php?p=download%2Fdebian%2Fnslu2&f=debian-armel-5.0rc1.zip&l=d-license.txt&k=800164d2fb07ee586bb586c7d0851358 MD5=3a46b5f46ee0f1b5c87a140c2e82d2c8 Released on 2008-11-12 Date: Dec Dec 28 18:17 Machine: bog standard NSLU2 - no mods Partitions: rbthomas@slug:~$ df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda1 ext3 6728280 713680 5672820 12% / tmpfs tmpfs 14756 0 14756 0% /lib/init/rw udev tmpfs 10240 36 10204 1% /dev tmpfs tmpfs 14756 0 14756 0% /dev/shm /dev/sda6 ext3 69228152 883300 64828228 2% /home Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [?] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] (but see above re: thumb drive) Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] with some fixups required post install Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> See above -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="5.0 (lenny) - installer build 20081029" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux slug 2.6.26-1-ixp4xx #1 Fri Oct 10 02:29:27 UTC 2008 armv5tel unknown lspci -knn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) lspci -knn: Kernel driver in use: ehci_hcd lsmod: Module Size Used by lsmod: jfs 166636 0 lsmod: reiserfs 245524 0 lsmod: ext3 123304 2 lsmod: jbd 45396 1 ext3 lsmod: vfat 9952 0 lsmod: fat 48156 1 vfat lsmod: nls_base 7168 3 jfs,vfat,fat lsmod: ext2 63496 0 lsmod: mbcache 7872 2 ext3,ext2 lsmod: sd_mod 22736 4 lsmod: usb_storage 82375 3 lsmod: scsi_mod 111076 2 sd_mod,usb_storage lsmod: ohci_hcd 18212 0 lsmod: ehci_hcd 35148 0 lsmod: evdev 8608 0 lsmod: ixp4xx_eth 12216 0 lsmod: ixp4xx_npe 7936 2 ixp4xx_eth lsmod: firmware_class 7552 1 ixp4xx_npe lsmod: ixp4xx_qmgr 5336 6 ixp4xx_eth lsmod: ixp4xx_beeper 2720 0 lsmod: usbcore 128252 4 usb_storage,ohci_hcd,ehci_hcd df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 14768 32 14736 0% /dev df: /dev/sda1 6728280 620632 5765868 10% /target df: /dev/sda6 69228152 317064 65394464 0% /target/home df: /dev/sda1 6728280 620632 5765868 10% /dev/.static/dev df: tmpfs 14768 32 14736 0% /target/dev free: total used free shared buffers free: Mem: 29540 26632 2908 0 836 free: Swap: 979924 4228 975696 free: Total: 1009464 30860 978604 /proc/cmdline: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug /proc/cpuinfo: Processor : XScale-IXP42x Family rev 1 (v5l) /proc/cpuinfo: BogoMIPS : 132.71 /proc/cpuinfo: Features : swp half thumb fastmult edsp /proc/cpuinfo: CPU implementer : 0x69 /proc/cpuinfo: CPU architecture: 5TE /proc/cpuinfo: CPU variant : 0x0 /proc/cpuinfo: CPU part : 0x41f /proc/cpuinfo: CPU revision : 1 /proc/cpuinfo: Cache type : undefined 5 /proc/cpuinfo: Cache clean : undefined 5 /proc/cpuinfo: Cache lockdown : undefined 5 /proc/cpuinfo: Cache format : Harvard /proc/cpuinfo: I size : 32768 /proc/cpuinfo: I assoc : 32 /proc/cpuinfo: I line length : 32 /proc/cpuinfo: I sets : 32 /proc/cpuinfo: D size : 32768 /proc/cpuinfo: D assoc : 32 /proc/cpuinfo: D line length : 32 /proc/cpuinfo: D sets : 32 /proc/cpuinfo: /proc/cpuinfo: Hardware : Linksys NSLU2 /proc/cpuinfo: Revision : 0000 /proc/cpuinfo: Serial : 0000000000000000 /proc/ioports: 00000000-0000ffff : PCI I/O Space /proc/iomem: 00000000-01ffffff : System RAM /proc/iomem: 00025000-002b0fff : Kernel text /proc/iomem: 002b2000-002fa793 : Kernel data /proc/iomem: 48000000-4bffffff : PCI Memory Space /proc/iomem: 48000000-48000fff : 0000:00:01.0 /proc/iomem: 48000000-48000fff : ohci_hcd /proc/iomem: 48001000-48001fff : 0000:00:01.1 /proc/iomem: 48001000-48001fff : ohci_hcd /proc/iomem: 48002000-480020ff : 0000:00:01.2 /proc/iomem: 48002000-480020ff : ehci_hcd /proc/iomem: 50000000-50ffffff : IXP4XX-Flash.0 /proc/iomem: 50000000-50ffffff : IXP4XXFlash /proc/iomem: 60000000-60003fff : IXP4xx Queue Manager /proc/iomem: c8000000-c8000fff : serial8250.0 /proc/iomem: c8000000-c800001f : serial /proc/iomem: c8001000-c8001fff : serial8250.0 /proc/iomem: c8001000-c800101f : serial /proc/iomem: c8007000-c8007fff : NPE-B /proc/iomem: c8008000-c8008fff : NPE-C /proc/iomem: c8009000-c8009fff : eth0 /proc/iomem: c800b000-c800bfff : pxa2xx-udc /proc/interrupts: CPU0 /proc/interrupts: 3: 165466 IXP4xx IXP4xx Queue Manager /proc/interrupts: 5: 748675 IXP4xx timer1 /proc/interrupts: 11: 1311 IXP4xx ixp4xx-beeper /proc/interrupts: 15: 1054 IXP4xx serial /proc/interrupts: 22: 0 IXP4xx NSLU2 power button /proc/interrupts: 26: 2929410 IXP4xx ehci_hcd:usb1 /proc/interrupts: 27: 0 IXP4xx ohci_hcd:usb3 /proc/interrupts: 28: 0 IXP4xx ohci_hcd:usb2 /proc/interrupts: 29: 0 IXP4xx NSLU2 reset button /proc/interrupts: Err: 0 /proc/meminfo: MemTotal: 29540 kB /proc/meminfo: MemFree: 2900 kB /proc/meminfo: Buffers: 836 kB /proc/meminfo: Cached: 16708 kB /proc/meminfo: SwapCached: 1888 kB /proc/meminfo: Active: 10832 kB /proc/meminfo: Inactive: 9128 kB /proc/meminfo: SwapTotal: 979924 kB /proc/meminfo: SwapFree: 975696 kB /proc/meminfo: Dirty: 256 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 2248 kB /proc/meminfo: Mapped: 1528 kB /proc/meminfo: Slab: 3280 kB /proc/meminfo: SReclaimable: 1460 kB /proc/meminfo: SUnreclaim: 1820 kB /proc/meminfo: PageTables: 292 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 994692 kB /proc/meminfo: Committed_AS: 9372 kB /proc/meminfo: VmallocTotal: 991232 kB /proc/meminfo: VmallocUsed: 17504 kB /proc/meminfo: VmallocChunk: 966652 kB /proc/bus/input/devices: I: Bus=0019 Vendor=001f Product=0001 Version=0100 /proc/bus/input/devices: N: Name="ixp4xx beeper" /proc/bus/input/devices: P: Phys=ixp4xx/gpio /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd event0 /proc/bus/input/devices: B: EV=40001 /proc/bus/input/devices: B: SND=6 /proc/bus/input/devices: -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: armel (armv5tel) Kernel: Linux 2.6.26-1-ixp4xx Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:3.0.0-6 Linux PCI Utilities ii reportbug 3.48 reports bugs in the Debian distrib installation-report suggests no packages. -- no debconf information
Attachment:
install.logs.gz
Description: GNU Zip compressed data