[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#466713: marked as done (Lenny SATA RAID Dual Boot Installation Report)

Your message dated Mon, 6 Oct 2008 00:52:23 +0200
with message-id <200810060052.23714.elendil@planet.nl>
and subject line Re: Bug#466713: Lenny SATA RAID Dual Boot Installation Report
has caused the Debian Bug report #466713,
regarding Lenny SATA RAID Dual Boot Installation Report
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
466713: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466713
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: CD and network
Image version: Debian GNU/Linux testing "Lenny" - Official Snapshot i386
NETINST Binary-1 20080216-21:18
Date: 2008-02-18 23:46 UTC

Machine: DIY, X38 Chipset, RAID0 (ICH9R) with 2 x 750 GB SATA, Dual
Boot, NVIDIA 8800GT
Processor: Intel E6750 (Core 2 Duo 2.66 GHz)
Memory: 4 GByte
Partitions: output of 'df -Tl':

Dateisystem   Typ    1K-Blöcke   Benutzt Verfügbar Ben% Eingehängt auf
/dev/mapper/isw_bcaabgabgj_AIEGIGAX382
              ext3   716308224  10605664 669316140   2% /
tmpfs        tmpfs     1816028         0   1816028   0% /lib/init/rw
udev         tmpfs       10240       104     10136   2% /dev
tmpfs        tmpfs     1816028         0   1816028   0% /dev/shm
/dev/mapper/isw_bcaabgabgj_AIEGIGAX381
              ntfs   732571644  35793080 696778564   5% /windows

An additional 5 GByte Partition for /swap isn't shown by df here.

Output of lspci -nn and lspci -vnn:

00:00.0 Host bridge [0600]: Intel Corporation 82X38 Express DRAM
Controller [8086:29e0] (rev 01)
00:01.0 PCI bridge [0604]: Intel Corporation 82X38 Express Host-Primary
PCI Express Bridge [8086:29e1] (rev 01)
00:06.0 PCI bridge [0604]: Intel Corporation 82X38 Express
Host-Secondary PCI Express Bridge [8086:29e9] (rev 01)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #4 [8086:2937] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #5 [8086:2938] (rev 02)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #6 [8086:2939] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #2 [8086:293c] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
Audio Controller [8086:293e] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 1 [8086:2940] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 4 [8086:2946] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 6 [8086:294a] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #1 [8086:2934] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #2 [8086:2935] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #3 [8086:2936] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC
Interface Controller [8086:2916] (rev 02)
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID
Controller [8086:2822] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
Controller [8086:2930] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce
8800 GT [10de:0611] (rev a2)
04:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02)
04:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
01)
06:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]

00:00.0 Host bridge [0600]: Intel Corporation 82X38 Express DRAM
Controller [8086:29e0] (rev 01)
	Subsystem: Giga-byte Technology Unknown device [1458:5000]
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82X38 Express Host-Primary
PCI Express Bridge [8086:29e1] (rev 01) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: f4000000-f7ffffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:06.0 PCI bridge [0604]: Intel Corporation 82X38 Express
Host-Secondary PCI Express Bridge [8086:29e9] (rev 01) (prog-if 00
[Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at e100 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at e200 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at e000 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5006]
	Flags: bus master, medium devsel, latency 0, IRQ 20
	Memory at fa205000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
Audio Controller [8086:293e] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:a022]
	Flags: bus master, fast devsel, latency 0, IRQ 22
	Memory at fa200000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fa000000-fa0fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f8000000-f9ffffff
	Prefetchable memory behind bridge: 00000000fa300000-00000000fa3fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 21
	I/O ports at e300 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 17
	I/O ports at e400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at e500 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5006]
	Flags: bus master, medium devsel, latency 0, IRQ 21
	Memory at fa204000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
	Memory behind bridge: fa100000-fa1fffff
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC
Interface Controller [8086:2916] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:5001]
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>

00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID
Controller [8086:2822] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:b000]
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 218
	I/O ports at e600 [size=8]
	I/O ports at e700 [size=4]
	I/O ports at e800 [size=8]
	I/O ports at e900 [size=4]
	I/O ports at ea00 [size=32]
	Memory at fa206000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
Controller [8086:2930] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:5001]
	Flags: medium devsel, IRQ 20
	Memory at fa207000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 0500 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce
8800 GT [10de:0611] (rev a2) (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. Unknown device
[1462:1170]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at b000 [size=128]
	[virtual] Expansion ROM at f7000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidiafb, nvidia

04:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Giga-byte Technology Unknown device [1458:b000]
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

04:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master
SecO PriO])
	Subsystem: Giga-byte Technology Unknown device [1458:b000]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	I/O ports at c000 [size=8]
	I/O ports at c100 [size=4]
	I/O ports at c200 [size=8]
	I/O ports at c300 [size=4]
	I/O ports at c400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: JMicron IDE
	Kernel modules: jmicron

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
01)
	Subsystem: Giga-byte Technology Unknown device [1458:e000]
	Flags: bus master, fast devsel, latency 0, IRQ 18
	I/O ports at d000 [size=256]
	Memory at f9000000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at fa300000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

06:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:1000]
	Flags: bus master, medium devsel, latency 32, IRQ 20
	Memory at fa104000 (32-bit, non-prefetchable) [size=2K]
	Memory at fa100000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire-ohci

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [E]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [E]
Overall install:        [O]

Comments/Problems:

Installation goal has been a dual boot SATA RAID0 machine as playground
for experimental software (i. e. Windows Vista ;-) and Lenny for real
desktop work. I've followed the instructions of the debian installer
SATA RAID wiki (http://wiki.debian.org/DebianInstaller/SataRaid).

Problem: The installer fails installing a boot loader.
Solution: The grub package from sid has to be installed in a shell:

chroot /target
mount -t proc none /proc
echo deb http://ftp-stud.fht-esslingen.de/debian/ sid main
>> /etc/apt/sources.lst
apt-get update
apt-get -t sid install grub

Don't forget to remove sid from /etc/apt/sources.lst afterwards. On my
box Lenny's grub is miscounting partitions when calling update-grub.
Could be fixed manually by editing menu.lst, but the next kernel update
could result in a non bootable system.

Problem: grub yields errors after calling "setup (hd0)" from grub
command line
Solution: link -s /boot /boot/boot

Problem: dmesg and syslog flooded by "attempt to access beyond end of
device" messages.
Solution: Advice udev and hal to ignore the partition table found on the
first disk.

Linux tries to reach the end of the partition as defined in the
partition table found on the first physical disk, but this table belongs
to the whole RAID.

Create /etc/hal/fdi/preprobe/000dmraid.fd with contents

<?xml version="1.0" encoding="UTF-8"?
<deviceinfo version="0.2">
 <device>
  <match key="scsi.model" string="SAMSUNG HD753LJ">
   <merge key="info.ignore" type="bool">true</merge>
  </match>
 </device>
</deviceinfo>

create /etc/udev/rules.d/000_dmraid.rules with

KERNEL=="sda1", OPTIONS+="ignore_device"
KERNEL=="sda2", OPTIONS+="ignore_device"
KERNEL=="sda3", OPTIONS+="ignore_device"

and do an "update-initramfs -u".

Of course, the file contents has to be adjusted to your local
circumstances.

Google for <grub dmraid ignore_device> for more details.

Problem: /dev/rtc timeout on settig system time during boot up
Solution: Append "--directisa" to HWCLOCKPARS in both hwclock.sh and
hwclockfirst.sh

Problem: Alsa complains an unknown device ALC882 at boot time.
Solution: echo "options snd-hda-intel model=6stack-dig"
>> /etc/modprobe.d/alsa-base

You've to adjust model to your hardware.

Problem: Some (not all) sound applications yields a crackling audio
output.

No solution so far. Hints found in the web regarding snd-hda-intel
options like position_fix=1/2 or enamble_msi=1 didn't help.

Michael Altmann
Altmann Industrieelektronik GmbH

--- End Message ---
--- Begin Message --- 
On Wednesday 20 February 2008, Michael Altmann wrote:
> Comments/Problems:
> Installation goal has been a dual boot SATA RAID0 machine as playground
> for experimental software (i. e. Windows Vista ;-) and Lenny for real
> desktop work. I've followed the instructions of the debian installer
> SATA RAID wiki (http://wiki.debian.org/DebianInstaller/SataRaid).
>
> Problem: The installer fails installing a boot loader.
> Solution: The grub package from sid has to be installed in a shell:

Recently the support for dmraid in partman has been improved significantly 
and some issues with grub installations have been fixed.
I expect this will have also fixed the problem you had.

Please see http://wiki.debian.org/DebianInstaller/SataRaid for current 
status and instructions for installing Debian on a Serial ATA RAID 
device.

Cheers,
FJP

--- End Message ---
Reply to: