Bug#498795: marked as done (Should automatically load required udebs for the nslu2)
Your message dated Mon, 15 Sep 2008 06:47:02 +0000
with message-id <E1Kf7rS-0007Km-Vf@ries.debian.org>
and subject line Bug#498795: fixed in rootskel 1.68
has caused the Debian Bug report #498795,
regarding Should automatically load required udebs for the nslu2
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
498795: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498795
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: d-i lenny beta 2 nslu2 armel
- From: root <joeyh@debian.org>
- Date: Sat, 21 Jun 2008 19:15:39 -0400
- Message-id: <20080621231539.6334.49415.reportbug@slug.kitenet.net>
Package: installation-reports
Version: 2.35
Severity: normal
Image version: http://www.cyrius.com/debian/nslu2/files/tmp/debian-armel-5.0beta2.zip
Machine: nslu2
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [E]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [ ]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
There was no /etc/environment installed. pam already has a long-open bug about
that.
I always forget to select the usb-storage and ext3 modules when
installing a slug, and this time was no exception; I ended up having to go
back from partman twice to get all the necessary bits for it to see the drive.
For some reason, partman did not detect that my existing /dev/hda3 was a
pre-formatted ext3 filesystem with /home on it. So I couldn't set up the
mounting of that in partman (without reformatting it).
/etc/fstab ended up with an /media/floppy mountpoint for /dev/sda. Which
was weird, because /dev/sda is a (very cheap) USB ide laptop disk enclosure;
/dev/sda1 is the root filesystem. Seems to happen because ID_TYPE is
reported as floppy:
root@slug:/etc/ssl/certs>udevinfo -q env -p /block/sda
ID_VENDOR=Myson_Century,_Inc.
ID_MODEL=USB_Mass_Storage_Device
ID_REVISION=b008
ID_SERIAL=Myson_Century,_Inc._USB_Mass_Storage_Device_100
ID_SERIAL_SHORT=100
ID_TYPE=floppy
ID_BUS=usb
ID_PATH=pci-0000:00:01.2-usb-0:1:1.0-scsi-0:0:0:0
I don't know if this is a kernel or a hardware bug. I do wonder if d-i
should trust the ID_TYPE at all.
Armel is so much faster on this de-underclocked slug than arm that
it's a pleasure to use!
--
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20080522"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux snail 2.6.24-1-ixp4xx #1 Tue May 13 10:43:34 UTC 2008 armv5tel unknown
lspci -knn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -knn: Kernel driver in use: ohci_hcd
lspci -knn: Kernel modules: ohci-hcd
lspci -knn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -knn: Kernel driver in use: ohci_hcd
lspci -knn: Kernel modules: ohci-hcd
lspci -knn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: Kernel modules: ehci-hcd
lsmod: Module Size Used by
lsmod: reiserfs 259572 0
lsmod: sd_mod 26896 3
lsmod: usb_storage 84263 2
lsmod: scsi_mod 120276 2 sd_mod,usb_storage
lsmod: ext3 138056 1
lsmod: jbd 49748 1 ext3
lsmod: vfat 13024 0
lsmod: fat 55228 1 vfat
lsmod: ext2 73320 0
lsmod: mbcache 9088 2 ext3,ext2
lsmod: ehci_hcd 34252 0
lsmod: ohci_hcd 21284 0
lsmod: evdev 11520 0
lsmod: ixp4xx_eth 16088 0
lsmod: ixp4xx_npe 8608 2 ixp4xx_eth
lsmod: firmware_class 10048 1 ixp4xx_npe
lsmod: ixp4xx_beeper 3488 0
lsmod: ixp4xx_qmgr 6040 6 ixp4xx_eth
lsmod: usbcore 139032 4 usb_storage,ehci_hcd,ohci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 14848 20 14828 0% /dev
df: tmpfs 14848 20 14828 0% /dev
df: /dev/sda1 2893628 545252 2201384 20% /target
df: /dev/sda1 2893628 545252 2201384 20% /dev/.static/dev
df: tmpfs 14848 20 14828 0% /target/dev
free: total used free shared buffers
free: Mem: 29700 27908 1792 0 752
free: Swap: 136544 4080 132464
free: Total: 166244 31988 134256
/proc/cpuinfo: Processor : XScale-IXP42x Family rev 1 (v5l)
/proc/cpuinfo: BogoMIPS : 266.24
/proc/cpuinfo: Features : swp half fastmult edsp
/proc/cpuinfo: CPU implementer : 0x69
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant : 0x0
/proc/cpuinfo: CPU part : 0x41f
/proc/cpuinfo: CPU revision : 1
/proc/cpuinfo: Cache type : undefined 5
/proc/cpuinfo: Cache clean : undefined 5
/proc/cpuinfo: Cache lockdown : undefined 5
/proc/cpuinfo: Cache format : Harvard
/proc/cpuinfo: I size : 32768
/proc/cpuinfo: I assoc : 32
/proc/cpuinfo: I line length : 32
/proc/cpuinfo: I sets : 32
/proc/cpuinfo: D size : 32768
/proc/cpuinfo: D assoc : 32
/proc/cpuinfo: D line length : 32
/proc/cpuinfo: D sets : 32
/proc/cpuinfo:
/proc/cpuinfo: Hardware : Linksys NSLU2
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/ioports: 00000000-0000ffff : PCI I/O Space
/proc/iomem: 00000000-01ffffff : System RAM
/proc/iomem: 00022000-00294fff : Kernel text
/proc/iomem: 00296000-002cfd77 : Kernel data
/proc/iomem: 48000000-4bffffff : PCI Memory Space
/proc/iomem: 48000000-48000fff : 0000:00:01.0
/proc/iomem: 48000000-48000fff : ohci_hcd
/proc/iomem: 48001000-48001fff : 0000:00:01.1
/proc/iomem: 48001000-48001fff : ohci_hcd
/proc/iomem: 48002000-480020ff : 0000:00:01.2
/proc/iomem: 48002000-480020ff : ehci_hcd
/proc/iomem: 50000000-50ffffff : IXP4XX-Flash.0
/proc/iomem: 50000000-50ffffff : IXP4XXFlash
/proc/iomem: 60000000-60003fff : IXP4xx Queue Manager
/proc/iomem: c8000000-c8000fff : serial8250.0
/proc/iomem: c8000000-c800001f : serial
/proc/iomem: c8001000-c8001fff : serial8250.0
/proc/iomem: c8001000-c800101f : serial
/proc/iomem: c8007000-c8007fff : NPE-B
/proc/iomem: c8008000-c8008fff : NPE-C
/proc/iomem: c8009000-c8009fff : eth0
/proc/iomem: c800b000-c800bfff : pxa2xx-udc
/proc/interrupts: CPU0
/proc/interrupts: 3: 114292 IXP4xx IXP4xx Queue Manager
/proc/interrupts: 5: 899769 IXP4xx timer1
/proc/interrupts: 11: 1319 IXP4xx ixp4xx-beeper
/proc/interrupts: 15: 976 IXP4xx serial
/proc/interrupts: 22: 0 IXP4xx NSLU2 power button
/proc/interrupts: 26: 3389432 IXP4xx ehci_hcd:usb3
/proc/interrupts: 27: 0 IXP4xx ohci_hcd:usb2
/proc/interrupts: 28: 8 IXP4xx ohci_hcd:usb1
/proc/interrupts: 29: 0 IXP4xx NSLU2 reset button
/proc/interrupts: Err: 0
/proc/meminfo: MemTotal: 29700 kB
/proc/meminfo: MemFree: 1776 kB
/proc/meminfo: Buffers: 752 kB
/proc/meminfo: Cached: 19264 kB
/proc/meminfo: SwapCached: 1720 kB
/proc/meminfo: Active: 12572 kB
/proc/meminfo: Inactive: 9716 kB
/proc/meminfo: SwapTotal: 136544 kB
/proc/meminfo: SwapFree: 132464 kB
/proc/meminfo: Dirty: 396 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 2084 kB
/proc/meminfo: Mapped: 1560 kB
/proc/meminfo: Slab: 2916 kB
/proc/meminfo: SReclaimable: 1244 kB
/proc/meminfo: SUnreclaim: 1672 kB
/proc/meminfo: PageTables: 300 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 151392 kB
/proc/meminfo: Committed_AS: 9620 kB
/proc/meminfo: VmallocTotal: 991232 kB
/proc/meminfo: VmallocUsed: 16876 kB
/proc/meminfo: VmallocChunk: 966652 kB
/proc/bus/input/devices: I: Bus=0019 Vendor=001f Product=0001 Version=0100
/proc/bus/input/devices: N: Name="ixp4xx beeper"
/proc/bus/input/devices: P: Phys=ixp4xx/gpio
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=40001
/proc/bus/input/devices: B: SND=6
/proc/bus/input/devices:
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.24-1-ixp4xx
Locale: LANG=, LC_CTYPE= (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.0.0-4 Linux PCI Utilities
ii reportbug 3.41 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: rootskel
Source-Version: 1.68
We believe that the bug you reported is fixed in the latest version of
rootskel, which is due to be installed in the Debian FTP archive:
rootskel-bootfloppy_1.68_amd64.udeb
to pool/main/r/rootskel/rootskel-bootfloppy_1.68_amd64.udeb
rootskel_1.68.dsc
to pool/main/r/rootskel/rootskel_1.68.dsc
rootskel_1.68.tar.gz
to pool/main/r/rootskel/rootskel_1.68.tar.gz
rootskel_1.68_amd64.udeb
to pool/main/r/rootskel/rootskel_1.68_amd64.udeb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 498795@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Martin Michlmayr <tbm@cyrius.com> (supplier of updated rootskel package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Mon, 15 Sep 2008 09:35:44 +0300
Source: rootskel
Binary: rootskel rootskel-bootfloppy
Architecture: source amd64
Version: 1.68
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Martin Michlmayr <tbm@cyrius.com>
Description:
rootskel - Skeleton root filesystem used by debian-installer (udeb)
rootskel-bootfloppy - Skeleton root filesystem used by debian-installer boot floppy (udeb)
Closes: 498795
Changes:
rootskel (1.68) unstable; urgency=low
.
[ Martin Michlmayr ]
* Load required udebs for the NSLU2 automatically (partman-auto,
partman-ext3 and usb-storage-modules). (Closes: #498795)
* Load required udebs for the Cobalt automatically (partman-auto,
partman-ext2r0 and partman-ext3).
* Remove S40framebuffer-module-linux-mips since framebuffer on
SB1 machines never worked.
* Move S59cobalt-welcome from cobalt-scripts to rootskel since
cobalt-scripts only contains this single script.
.
[ Jérémy Bobbio ]
* reopen-console: Save the console device found from kernel messages in
/var/run/console-device as it is possible that those would be unavailable
later on.
* Move back the switch from /dev/console to the real console device in
/etc/inittab as doing it before calling init does not really work.
Checksums-Sha1:
ad5011ce96e7546a4349f51272ba63b7ae5b9a80 946 rootskel_1.68.dsc
19a152bbfb4199c9b83422df88194a591f4bbfac 30475 rootskel_1.68.tar.gz
7ec5e133a21eec6a9fbdce91f18176c3b3f53816 7992 rootskel_1.68_amd64.udeb
93db4cd893af51ac8485a17782c430a8b5674baf 2786 rootskel-bootfloppy_1.68_amd64.udeb
Checksums-Sha256:
ead8ad57fe82a94774c41f97a09ab05c93567156a5df717c415dfbdb98c45862 946 rootskel_1.68.dsc
a9a328260b15530b24cb3973e32a5f109188b50e75081797670dc7517aae1850 30475 rootskel_1.68.tar.gz
173d756e4b55b93784b894497dba0d05f569c7b64a165c4df415135044b8bc7a 7992 rootskel_1.68_amd64.udeb
1670271f0cbbe4cfa55cdcac3be71aaa3dad9dc21359d61b627933704ff23c16 2786 rootskel-bootfloppy_1.68_amd64.udeb
Files:
9c2a5d2f9839a4a0890dde7b6f56686c 946 debian-installer standard rootskel_1.68.dsc
4d5960b73db94571978cb5c3ed921b23 30475 debian-installer standard rootskel_1.68.tar.gz
94e640390dec3c965b78001ba47b91c5 7992 debian-installer standard rootskel_1.68_amd64.udeb
db3dcd445455b8284c9986f7bd550de3 2786 debian-installer extra rootskel-bootfloppy_1.68_amd64.udeb
Package-Type: udeb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkjOBEMACgkQKb5dImj9VJ+YQgCeO/m4iHDT9SuR3PYGq9znmujU
D50An3P4C3db8el4/2drQqbADgDr5Q9e
=XdFj
-----END PGP SIGNATURE-----
--- End Message ---
Reply to: