[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#471764: marked as done (partman-lvm: cannot set a size to lvm partition (size 0 is invalid))

Your message dated Tue, 05 Aug 2008 17:02:10 +0000
with message-id <E1KQPvG-0003vu-LS@ries.debian.org>
and subject line Bug#411943: fixed in partman-lvm 62
has caused the Debian Bug report #411943,
regarding partman-lvm: cannot set a size to lvm partition (size 0 is invalid)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
411943: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=411943
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: partman-lvm
Severity: normal

Hello,

I am running debian etch stable from a net install cd I just downloaded.
I have 4x 500gb drives.

Each drive has 2 partitions. 1gb and 499gb.

raid 1 - each 1gb has been setup as raid 1
raid 5- each 499gb partition was setup as raid 5 totaling a raid 5
partition as 1500gb / 1.5Tb

I set the raid 5 partition as a lvm group and now I am trying to
create lvm partition for my home at 1450GB. I keep getting the error
that partition size 0 cannot be created.

I tried:
1450g
1450GB
97%
1.45t
1.45TB
1459000m
1459000MB
all give me the same error.

Here is a syslog.
I don't know why but when I want to create lvm volume:
1497303MB is my initial setting.
I can just hit enter to 1497303MB and it will take it.

But if I pick 1457303MB I get an error.

What is going on with these numbers. syslog tells  me that 1.36 TB is
only available? Shouldn't that be 1.4xx TB?

Can somebody explain why I cannot create my 1.45 tb and rest as swap
partitions? Also why sys log tells me I have 1.36 even do other
screens tell me that my lvm group holds 1.5tb?

I tried both. installgui and install when setting these up.

After emailing a list I found out:

There is some confusion inside partman and between partman and other
 tools about how disk sizes are presented. Disk capacity is usually given as a power of 10, while other sizes are in multiples of bytes (power of 2).

So 40MB can be either 40.000.000 bytes or 41.943.040 (40*1024*1024).


 You are correct on this one. Finally after 4h of reserach I realized
 that 500Gb drive is in reality 465GiB. So 1.3Tb 465*3 is about right.
 So there seem to be a miss match of what is displayed and what it is
 in reality. In real world the drive is 465Gib and that is what I
 should see.

 The partition screen shows the lvm group partition as 1.5TB, but when
 you go into add first partition it wants the actual GiB size (max
 1.5Tb =max 1.3Tb).
 Not sure why it let me put into 1497303MB (all space) but not
 1497000Mb etc.  If you recalculate by hand how much space you have in
 GiB then its easy from there. Confusion introduced by 500Gb =465Gib
 has everybody confused I guess. It would be much easier if everything
 was in GiB



 So final setting was to make one partition 1.1Tb and rest with rest of
 space.

 So I guess the partition screen should either show you (1500GB / 1395
 GiB ) or it should pick one(GiB preffered). My guess would to be make
 Gib a default since that is the size I will see when I do 'df -h' when
 its all said and done. I guess at Tera size the Gib vs GB measurement
 is huge!


here is a syslog to help you debug the problem:

here is a syslog.

Mar  4 14:22:19 main-menu[2608]: INFO: Falling back to the package
description for auto-install
Mar  4 14:22:19 main-menu[2608]: INFO: Falling back to the package
description for ai-choosers
Mar  4 14:22:19 main-menu[2608]: INFO: Menu item 'partman-base' selected
Mar  4 14:22:21 partman:   PV /dev/md1   VG myserver   lvm2 [1.36 TB /
1.36 TB free]
Mar  4 14:22:21 partman:   Total: 1 [1.36 TB] / in use: 1 [1.36 TB] /
in no VG: 0 [0   ]
Mar  4 14:22:21 partman:   Reading all physical volumes.  This may
take a while...
Mar  4 14:22:21 partman:   Found volume group "myserver" using
metadata type lvm2
Mar  4 14:22:26 partman-lvm:   PV /dev/md1   VG myserver   lvm2 [1.36
TB / 1.36 TB free]
Mar  4 14:22:26 partman-lvm:   Total: 1 [1.36 TB] / in use: 1 [1.36
TB] / in no VG: 0 [0   ]
Mar  4 14:22:26 partman-lvm:   Reading all physical volumes.  This may
take a while...
Mar  4 14:22:26 partman-lvm:   Found volume group "myserver" using
metadata type lvm2
Mar  4 14:22:28 net/hw-detect.hotplug: Detected hotpluggable network
interface eth2
Mar  4 14:22:28 net/hw-detect.hotplug: Detected hotpluggable network
interface lo
Mar  4 14:22:28 net/hw-detect.hotplug: Detected hotpluggable network
interface eth1
Mar  4 14:22:28 net/hw-detect.hotplug: Detected hotpluggable network
interface eth0
Mar  4 14:22:28 udevd-event[8506]: udev_node_symlink: symlink(md/0,
/dev/md0) failed: File exists
Mar  4 14:22:28 udevd-event[8508]: udev_node_symlink: symlink(md/1,
/dev/md1) failed: File exists
Mar  4 14:22:46 partman-lvm:   Insufficient free extents (356985) in
volume group myserver: 371200 required
Mar  4 14:22:48 init: Process '/sbin/debian-installer' (pid 2426)
exited.  Scheduling it for restart.
Mar  4 14:22:48 init: Starting pid 9684, console /dev/vc/1:
'/sbin/debian-installer'
Mar  4 14:22:49 main-menu[2608]: WARNING **: Configuring
'partman-base' failed with error code 141
Mar  4 14:22:49 debconf: Setting debconf/language to en
Mar  4 14:24:39 main-menu[9991]: INFO: Falling back to the package
description for auto-install
Mar  4 14:24:39 main-menu[9991]: INFO: Falling back to the package
description for ai-choosers
Mar  4 14:24:39 main-menu[9991]: INFO: Menu item 'partman-base' selected
Mar  4 14:24:40 partman:   PV /dev/md1   VG myserver   lvm2 [1.36 TB /
1.36 TB free]
Mar  4 14:24:40 partman:   Total: 1 [1.36 TB] / in use: 1 [1.36 TB] /
in no VG: 0 [0   ]
Mar  4 14:24:41 partman:   Reading all physical volumes.  This may
take a while...
Mar  4 14:24:41 partman:   Found volume group "myserver" using
metadata type lvm2
Mar  4 14:24:49 partman-lvm:   PV /dev/md1   VG myserver   lvm2 [1.36
TB / 1.36 TB free]
Mar  4 14:24:49 partman-lvm:   Total: 1 [1.36 TB] / in use: 1 [1.36
TB] / in no VG: 0 [0   ]
Mar  4 14:24:49 partman-lvm:   Reading all physical volumes.  This may
take a while...
Mar  4 14:24:49 partman-lvm:   Found volume group "myserver" using
metadata type lvm2
Mar  4 14:25:00 partman-lvm:   PV /dev/md1   VG myserver   lvm2 [1.36
TB / 1.36 TB free]
Mar  4 14:25:00 partman-lvm:   Total: 1 [1.36 TB] / in use: 1 [1.36
TB] / in no VG: 0 [0   ]
Mar  4 14:25:00 partman-lvm:   Reading all physical volumes.  This may
take a while...
Mar  4 14:25:00 partman-lvm:   Found volume group "myserver" using
metadata type lvm2
Mar  4 14:25:01 net/hw-detect.hotplug: Detected hotpluggable network
interface lo
Mar  4 14:25:01 net/hw-detect.hotplug: Detected hotpluggable network
interface eth0
Mar  4 14:25:01 net/hw-detect.hotplug: Detected hotpluggable network
interface eth1
Mar  4 14:25:01 net/hw-detect.hotplug: Detected hotpluggable network
interface eth2
Mar  4 14:25:02 udevd-event[15327]: udev_node_symlink: symlink(md/0,
/dev/md0) failed: File exists
Mar  4 14:25:02 udevd-event[15328]: udev_node_symlink: symlink(md/1,
/dev/md1) failed: File exists
Mar  4 14:25:10 main-menu[1662]: WARNING **: Configuring
'partman-base' failed with error code 141
Mar  4 14:25:10 kernel: program parted_devices is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:10 kernel: program parted_devices is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:10 kernel: program parted_devices is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:10 kernel: program parted_devices is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:10 kernel: program parted_devices is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:10 kernel: program parted_server is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:11 kernel: program parted_server is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:11 kernel: program parted_server is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:11 kernel: program parted_server is using a deprecated
SCSI ioctl, please convert it to SG_IO
Mar  4 14:25:11 partman:   PV /dev/md1   VG myserver   lvm2 [1.36 TB /
1.36 TB free]
Mar  4 14:25:11 partman:   Total: 1 [1.36 TB] / in use: 1 [1.36 TB] /
in no VG: 0 [0   ]
Mar  4 14:25:12 partman:   Reading all physical volumes.  This may
take a while...
Mar  4 14:25:12 partman:   Found volume group "myserver" using
metadata type lvm2
Mar  4 14:25:29 partman-lvm:   PV /dev/md1   VG myserver   lvm2 [1.36
TB / 1.36 TB free]
Mar  4 14:25:29 partman-lvm:   Total: 1 [1.36 TB] / in use: 1 [1.36
TB] / in no VG: 0 [0   ]
Mar  4 14:25:29 partman-lvm:   Reading all physical volumes.  This may
take a while...
Mar  4 14:25:29 partman-lvm:   Found volume group "myserver" using
metadata type lvm2
Mar  4 14:25:31 net/hw-detect.hotplug: Detected hotpluggable network
interface eth1
Mar  4 14:25:31 net/hw-detect.hotplug: Detected hotpluggable network
interface eth2
Mar  4 14:25:31 net/hw-detect.hotplug: Detected hotpluggable network
interface lo
Mar  4 14:25:31 net/hw-detect.hotplug: Detected hotpluggable network
interface eth0
Mar  4 14:25:31 udevd-event[20612]: udev_node_symlink: symlink(md/0,
/dev/md0) failed: File exists
Mar  4 14:25:31 udevd-event[20655]: udev_node_symlink: symlink(md/1,
/dev/md1) failed: File exists
Mar  4 14:25:46 partman-lvm:   0 logical volume(s) in volume group
"myserver" now active
Mar  4 14:25:46 partman-lvm:   Volume group "myserver" successfully
removed
Mar  4 14:26:00 partman-lvm:   Volume group "myserver" successfully
created
Mar  4 14:27:14 partman-lvm:
Mar  4 14:27:14 partman-lvm: Insufficient free extents (356985) in
volume group myserver: 364326 required
Mar  4 14:27:14 partman-lvm:
Mar  4 14:27:14 partman-lvm:   Rounding up size to full physical extent
1.39 TB
Mar  4 14:31:32 partman-lvm:   Logical volume "myserver" created
Mar  4 14:31:52 partman-lvm:   Logical volume "myserver" successfully
removed
Mar  4 14:33:17 partman-lvm:   Insufficient free extents (356985) in
volume group myserver: 364326 required
Mar  4 14:33:17 partman-lvm:   Rounding up size to full physical extent
1.39 TB


here is the portman
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 118
parted_server: Opening infifo
/lib/partman/choose_partition/30lvm/choices:
*******************************************************
/lib/partman/choose_partition/30lvm/choices: IN: PARTITIONS =dev=md=0
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: 1   0-1003356159    1003356160      primary ext3
/dev/md/0


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 119
parted_server: Opening infifo
/lib/partman/choose_partition/30lvm/choices: IN: PARTITIONS =dev=md=1
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: 1   0-1497304989695 1497304989696   primary ext2
/dev/md/1


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 120
parted_server: Opening infifo
/lib/partman/choose_partition/30lvm/choices: IN: PARTITIONS
=dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host0/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host0/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 121
parted_server: Opening infifo
/lib/partman/choose_partition/30lvm/choices: IN: PARTITIONS
=dev=scsi=host2=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host2/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host2/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 122
parted_server: Opening infifo
/lib/partman/choose_partition/30lvm/choices: IN: PARTITIONS
=dev=scsi=host3=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host3/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host3/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 123
parted_server: Opening infifo
/lib/partman/choose_partition/30lvm/choices: IN: PARTITIONS
=dev=scsi=host4=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host4/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host4/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 124
parted_server: Opening infifo
/lib/partman/choose_partition/35crypto/choices:
*******************************************************
/lib/partman/choose_partition/35crypto/choices: IN: PARTITIONS =dev=md=0
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: 1   0-1003356159    1003356160      primary ext3
/dev/md/0


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 125
parted_server: Opening infifo
/lib/partman/choose_partition/35crypto/choices: IN: PARTITIONS =dev=md=1
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: 1   0-1497304989695 1497304989696   primary ext2
/dev/md/1


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 126
parted_server: Opening infifo
/lib/partman/choose_partition/35crypto/choices: IN: PARTITIONS
=dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host0/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host0/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 127
parted_server: Opening infifo
/lib/partman/choose_partition/35crypto/choices: IN: PARTITIONS
=dev=scsi=host2=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host2/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host2/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 128
parted_server: Opening infifo
/lib/partman/choose_partition/35crypto/choices: IN: PARTITIONS
=dev=scsi=host3=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host3/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host3/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 129
parted_server: Opening infifo
/lib/partman/choose_partition/35crypto/choices: IN: PARTITIONS
=dev=scsi=host4=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host4/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host4/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 130
parted_server: Opening infifo
/lib/partman/choose_partition/45auto/choices:
*******************************************************
/lib/partman/choose_partition/60partition_tree/choices:
*******************************************************
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS
=dev=md=0
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: 1   0-1003356159    1003356160      primary ext3
/dev/md/0


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
1       0-1003356159    1003356160      primary ext3    /dev/md/0
parted_server: main_loop: iteration 131
parted_server: Opening infifo
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS
=dev=md=1
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: 1   0-1497304989695 1497304989696   primary ext2
/dev/md/1


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
1       0-1497304989695 1497304989696   primary ext2    /dev/md/1
parted_server: main_loop: iteration 132
parted_server: Opening infifo
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS
=dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host0/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host0/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host0/bus0/target0/lun0/part1
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host0/bus0/target0/lun0/part2
parted_server: main_loop: iteration 133
parted_server: Opening infifo
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS
=dev=scsi=host2=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host2/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host2/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host2/bus0/target0/lun0/part1
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host2/bus0/target0/lun0/part2
parted_server: main_loop: iteration 134
parted_server: Opening infifo
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS
=dev=scsi=host3=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host3/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host3/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host3/bus0/target0/lun0/part1
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host3/bus0/target0/lun0/part2
parted_server: main_loop: iteration 135
parted_server: Opening infifo
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS
=dev=scsi=host4=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host4/bus0/target0/lun0/part1


parted_server: OUT:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host4/bus0/target0/lun0/part2


parted_server: Partitions printed
parted_server: OUT:


parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
1       32256-1003484159        1003451904      primary ext3
/dev/scsi/host4/bus0/target0/lun0/part1
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
2       1003484160-500105249279 499101765120    primary unknown
/dev/scsi/host4/bus0/target0/lun0/part2
parted_server: main_loop: iteration 136
parted_server: Opening infifo


I won't be able to provide any more logs as the system is in production
as of last week.
It would be great if Gb/GiB is shown in the partition installer.

Thank you
Lucas

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

--- End Message ---
--- Begin Message --- 
Source: partman-lvm
Source-Version: 62

We believe that the bug you reported is fixed in the latest version of
partman-lvm, which is due to be installed in the Debian FTP archive:

partman-lvm_62.dsc
  to pool/main/p/partman-lvm/partman-lvm_62.dsc
partman-lvm_62.tar.gz
  to pool/main/p/partman-lvm/partman-lvm_62.tar.gz
partman-lvm_62_all.udeb
  to pool/main/p/partman-lvm/partman-lvm_62_all.udeb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 411943@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Otavio Salvador <otavio@debian.org> (supplier of updated partman-lvm package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Tue, 05 Aug 2008 13:58:14 -0300
Source: partman-lvm
Binary: partman-lvm
Architecture: source all
Version: 62
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Otavio Salvador <otavio@debian.org>
Description: 
 partman-lvm - Adds support for LVM to partman (udeb)
Closes: 411943
Changes: 
 partman-lvm (62) unstable; urgency=low
 .
   [ Jérémy Bobbio ]
   * Fix size substitution when displaying partman-lvm/lvcreate_error.
   * Harmonize size specification used when creating new Logical Volumes:
      - lv_create() now uses extents instead of size,
      - lvm_size_from_human() has been renamed to lvm_extents_from_human(),
      - As extent sizes are specific to a given Volume Group,
        lvm_extents_from_human() take the VG name as its first argument.
     Breaks: partman-auto-lvm (<= 27)                         (Closes: #411943)
   * Preserve "align" capability in choose_partition/lvm/do_option.
     Requires cdebconf (>= 0.133).
   * Activate Volume Groups during partman initialization: like MD devices,
     there is now 2 different init.d scripts:
       - lvm-devices, run before parted, is responsible for scanning and
         activating Volume Groups,
       - lvm, run later, will ensure that Physical Volumes have "lvm" as
         method, and create free space for Logical Volumes if needed.
   * Remove obsolete template partman-lvm/activevg.
 .
   [ Updated translations ]
   * Arabic (ar.po) by Ossama M. Khayat
   * Belarusian (be.po) by Pavel Piatruk
   * Bulgarian (bg.po) by Damyan Ivanov
   * Czech (cs.po) by Miroslav Kure
   * German (de.po) by Jens Seidel
   * Dzongkha (dz.po) by Tenzin Dendup
   * Esperanto (eo.po) by Felipe Castro
   * Spanish (es.po) by Javier Fernández-Sanguino Peña
   * Basque (eu.po) by Piarres Beobide
   * Finnish (fi.po) by Esko Arajärvi
   * French (fr.po) by Christian Perrier
   * Galician (gl.po) by Jacobo Tarrio
   * Gujarati (gu.po) by Kartik Mistry
   * Croatian (hr.po) by Josip Rodin
   * Indonesian (id.po) by Arief S Fitrianto
   * Italian (it.po) by Milo Casagrande
   * Japanese (ja.po) by Kenshi Muto
   * Korean (ko.po) by Changwoo Ryu
   * Kurdish (ku.po) by Erdal Ronahi
   * Lithuanian (lt.po) by Kęstutis Biliūnas
   * Malayalam (ml.po) by Praveen|പ്രവീണണ്‍ A|എ
   * Marathi (mr.po) by Sampada
   * Norwegian Bokmål (nb.po) by Hans Fredrik Nordhaug
   * Dutch (nl.po) by Frans Pop
   * Portuguese (Brazil) (pt_BR.po) by Felipe Augusto van de Wiel (faw)
   * Portuguese (pt.po) by Miguel Figueiredo
   * Romanian (ro.po) by Eddy Petrișor
   * Russian (ru.po) by Yuri Kozlov
   * Slovak (sk.po) by Ivan Masár
   * Slovenian (sl.po) by Matej Kovacic
   * Swedish (sv.po) by Daniel Nylander
   * Thai (th.po) by Theppitak Karoonboonyanan
   * Tagalog (tl.po) by Eric Pareja
   * Turkish (tr.po) by Mert Dirik
   * Vietnamese (vi.po) by Clytie Siddall
   * Wolof (wo.po) by Mouhamadou Mamoune Mbacke
   * Simplified Chinese (zh_CN.po) by Kov Chai
Checksums-Sha1: 
 8f1e58a132743507f5879945d523c296c0351ab7 904 partman-lvm_62.dsc
 bbbf838e4e1e3b8e62e0b02d3826cecb8b0ca585 220526 partman-lvm_62.tar.gz
 a3ef39513098f283be07c1fbdd002b4d8f1c00c8 211126 partman-lvm_62_all.udeb
Checksums-Sha256: 
 7f9f075f3f3c6fb429b085430c6e61b647e6e811079faa095d594e5f3fb00969 904 partman-lvm_62.dsc
 debcf77c2a333f8cd6fd77cb1f5198e6c57d09bab6aa3e132e62d3eac3a6b26c 220526 partman-lvm_62.tar.gz
 95356b51a64d7c5f16d395e73ffd374785b118e55147953da8cdeea57bd9b809 211126 partman-lvm_62_all.udeb
Files: 
 24dd1062d336a8883694a60ee8849ac9 904 debian-installer optional partman-lvm_62.dsc
 a93449987307d09392af1f09f2b17ee3 220526 debian-installer optional partman-lvm_62.tar.gz
 a44793c3b9bd103c39220417fc935b7f 211126 debian-installer optional partman-lvm_62_all.udeb
Package-Type: udeb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkiYhrgACgkQLqiZQEml+FU2JwCfeohHucmC1rPt8x5s580QaYoe
PMkAniKr5nCSyShXWDsTu7q6rG51yX3T
=Dfsl
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: