Bug#487906: Lenny Beta2 on PowerPC - strange video mode after reboot
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image>
Lenny Beta2 for PowerPC KDE CD-1
uname -a: <The result of running uname -a on a shell prompt>
Date: <Date and time of the install>
June 24 19:35 EDT (US Eastern "daylight" time)
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
Boot from CD. Did a "standard" install
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Processor:$ cat /proc/cpuinfo
processor : 0
cpu : 7400, altivec supported
temperature : 35-37 C (uncalibrated)
clock : 350.000000MHz
revision : 2.8 (pvr 000c 0208)
bogomips : 49.66
timebase : 24907667
platform : PowerMac
machine : PowerMac3,1
motherboard : PowerMac3,1 MacRISC2 MacRISC Power Macintosh
detected as : 65 (PowerMac G4 AGP Graphics)
pmac flags : 00000004
L2 cache : 1024K unified
pmac-generation : NewWorld
Memory:
$ cat /proc/meminfo
MemTotal: 1291852 kB
Root Device: <IDE? SCSI? Name of device?>
/dev/hda9
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
$ cat /testroot/etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda9 / ext3 errors=remount-ro 0 1
/dev/hda4 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0
Output of lspci and lspci -n:
$ sudo lspci -vv
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: [80] AGP version 1.0
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at f0000400 [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f1000000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
0001:10:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Bus: primary=10, secondary=11, subordinate=11, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
0001:11:03.0 Mass storage controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02)
Subsystem: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at f2001040 [size=8]
Region 1: I/O ports at f2001030 [size=4]
Region 2: I/O ports at f2001020 [size=8]
Region 3: I/O ports at f2001010 [size=4]
Region 4: I/O ports at f2001000 [size=16]
Region 5: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 80100000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0001:11:07.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
0001:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
0001:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
0001:11:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 80084000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0002:21:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
0002:21:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5000000 [disabled] [size=1M]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [o]
Configure network HW: [o]
Config network: [o]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Create file systems: [o]
Mount partitions: [o]
Install base system: [o]
Install boot loader: [o]
Reboot: [o]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
All went as expected during the install. However, after the reboot,
the screen came up in 800x600 mode and could not be changed.
I finall had to edit the xorg.conf file.
Here's the diff:
$ diff xorg.conf xorg.conf.ORIG
37,40c37
< Identifier "DELL 2001FP"
< Option "DPMS"
< HorizSync 31-80
< VertRefresh 56-76
---
> Identifier "Configured Monitor"
45,49c42
< Monitor "DELL 2001FP"
< SubSection "Display"
< Depth 24
< Modes "1600x1200" "1280x1024" "1272x1017" "1024x768" "880x660" "800x600" "760x608" "720x400" "640x480"
< EndSubSection
---
> Monitor "Configured Monitor"
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: