Bug#486168: Additional information from Knoppix 5.1.1
The following information has been collected using a Knoppix 5.1.1 i386 CD
root@Knoppix:/ramdisk/home/knoppix# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:05.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
00:05.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
00:06.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
(rev 08)
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 02)
00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
02)
00:0c.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)
root@Knoppix:/ramdisk/home/knoppix# lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge [8086:7190] (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at 40000000 (32-bit, prefetchable) [size=256M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: fc000000-fdffffff
00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 02)
Flags: bus master, medium devsel, latency 0
00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 32
I/O ports at 1860 [size=16]
00:04.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at 1840 [size=32]
00:04.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
Flags: medium devsel, IRQ 9
00:05.0 SCSI storage controller [0100]: Adaptec AHA-2940U/UW / AHA-39xx /
AIC-7895 [9004:7895] (rev 04)
Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD AIC-7895B
[9004:7895]
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at 1000 [disabled] [size=256]
Memory at f8100000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 30100000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
00:05.1 SCSI storage controller [0100]: Adaptec AHA-2940U/UW / AHA-39xx /
AIC-7895 [9004:7895] (rev 04)
Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD AIC-7895B
[9004:7895]
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at 1400 [disabled] [size=256]
Memory at f8101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
00:06.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro
100] [8086:1229] (rev 08)
Subsystem: Hewlett-Packard Company NetServer 10/100TX [103c:10ca]
Flags: bus master, medium devsel, latency 66, IRQ 19
Memory at f8102000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1800 [size=64]
Memory at f8000000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 30000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
00:09.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video
Capture [109e:036e] (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb]
Flags: bus master, medium devsel, latency 132, IRQ 17
Memory at f8103000 (32-bit, prefetchable) [size=4K]
00:09.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio
Capture [109e:0878] (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb]
Flags: bus master, medium devsel, latency 33, IRQ 17
Memory at f8104000 (32-bit, prefetchable) [size=4K]
00:0c.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152
[1011:0024] (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, medium devsel, latency 57
Bus: primary=00, secondary=02, subordinate=02, sec-latency=36
Capabilities: [dc] Power Management version 1
01:00.0 VGA compatible controller [0300]: 3Dfx Interactive, Inc. Voodoo 3
[121a:0005] (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP [121a:0030]
Flags: 66MHz, fast devsel, IRQ 16
Memory at fa000000 (32-bit, non-prefetchable) [size=32M]
Memory at fc000000 (32-bit, prefetchable) [size=32M]
I/O ports at 9000 [size=256]
Capabilities: [54] AGP version 1.0
Capabilities: [60] Power Management version 1
root@Knoppix:/ramdisk/home/knoppix# dmesg
Linux version 2.6.19 (root@Knoppix) (gcc version 4.1.2 20061028 (prerelease)
(Debian 4.1.1-19)) #7 SMP PREEMPT Sun Dec 17 22:01:07 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001ffffc00 (ACPI data)
BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffeac00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f6e60
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125969 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.2 present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6e40
ACPI: RSDT (v001 PTLTD RSDT 0x00000001 LTP 0x00000000) @ 0x1fffd324
ACPI: FADT (v001 HP E 60 0x00000001 PTL 0x000f4240) @ 0x1ffffb09
ACPI: MADT (v001 PTLTD APIC 0x00000000 LTP 0x00000000) @ 0x1ffffb7d
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x00000000 LTP 0x00000001) @ 0x1ffffbd9
ACPI: DSDT (v001 HP E 60 0x00000000 MSFT 0x0100000b) @ 0x00000000
ACPI: BIOS age (1999) fails cutoff (2001), acpi=force is required to enable
ACPI
ACPI: Disabling ACPI support
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: HP Product ID: E 60 APIC at: 0xFEE00000
Processor #1 6:5 APIC version 17
Processor #0 6:5 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Detected 400.942 MHz processor.
Built 1 zonelists. Total pages: 130033
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off
vga=791 initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix
BOOT_IMAGE=linux
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513512k/524224k available (2747k kernel code, 10140k reserved, 958k
data, 336k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc04a6000 - 0xc04fa000 ( 336 kB)
.data : 0xc03aef9c - 0xc049e7b4 ( 958 kB)
.text : 0xc0100000 - 0xc03aef9c (2747 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 802.80 BogoMIPS (lpj=1605603)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000
00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
CPU0: Intel Pentium II (Deschutes) stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/0 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 801.91 BogoMIPS (lpj=1603837)
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000
00000000 00000000
CPU1: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (1604.72 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=2624
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 1188k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfdad2, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6e70
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x8f03, dseg 0x400
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
libata version 2.00 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region 8000-803f claimed by PIIX4 ACPI
PCI quirk: region e800-e80f claimed by PIIX4 SMB
PCI: Firmware left 0000:00:06.0 e100 interrupts enabled, disabling
Boot video device is 0000:01:00.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0
PCI->APIC IRQ transform: 0000:00:04.2[D] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:06.0[A] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:09.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:00:09.1[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:01: ioport range 0xc00-0xc08 has been reserved
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x8000-0x803f has been reserved
pnp: 00:0a: ioport range 0xe800-0xe80f has been reserved
PCI: Failed to allocate mem resource #6:10000@fe000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: fa000000-fbffffff
PREFETCH window: fc000000-fdffffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1213686582.420:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.8)
fuse distribution version: 2.6.1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xfc000000, mapped to 0xe0880000, using 3072k, total
16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:7e6b
vesafb: pmi: set display start = c00c7e94, set palette = c00c7ebe
vesafb: pmi: ports = c8c3 c903 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: CD-532E-A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-724.<6>PNP: PS/2 Controller
[PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse as /class/input/input1
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Failed initialization of WD-7000 SCSI card!
ahc_pci:0:5:0: Using left over BIOS settings
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7895 Ultra SCSI adapter>
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi 0:0:0:0: Direct-Access HP 9.10GB B 68-5520 5520 PQ: 0 ANSI: 2
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous
target0:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 8)
target0:0:0: Domain Validation skipping write tests
target0:0:0: Ending Domain Validation
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write through
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
scsi 0:0:1:0: Direct-Access HP 9.10GB B 68-5520 5520 PQ: 0 ANSI: 2
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
target0:0:1: Beginning Domain Validation
target0:0:1: wide asynchronous
target0:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 8)
target0:0:1: Domain Validation skipping write tests
target0:0:1: Ending Domain Validation
SCSI device sdb: 17773524 512-byte hdwr sectors (9100 MB)
sdb: Write Protect is off
sdb: Mode Sense: b3 00 00 08
SCSI device sdb: drive cache: write through
SCSI device sdb: 17773524 512-byte hdwr sectors (9100 MB)
sdb: Write Protect is off
sdb: Mode Sense: b3 00 00 08
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2 sdb3
sd 0:0:1:0: Attached scsi disk sdb
scsi 0:0:2:0: Direct-Access QUANTUM VIKING II 9.1WLS 3506 PQ: 0 ANSI: 2
scsi0:A:2:0: Tagged Queuing enabled. Depth 253
target0:0:2: Beginning Domain Validation
target0:0:2: wide asynchronous
target0:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 8)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
SCSI device sdc: 17836668 512-byte hdwr sectors (9132 MB)
sdc: Write Protect is off
sdc: Mode Sense: b3 00 00 08
SCSI device sdc: drive cache: write back
SCSI device sdc: 17836668 512-byte hdwr sectors (9132 MB)
sdc: Write Protect is off
sdc: Mode Sense: b3 00 00 08
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3
sd 0:0:2:0: Attached scsi disk sdc
scsi 0:0:3:0: Direct-Access HP 9.10GB B 68-5520 5520 PQ: 0 ANSI: 2
scsi0:A:3:0: Tagged Queuing enabled. Depth 253
target0:0:3: Beginning Domain Validation
target0:0:3: wide asynchronous
target0:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 8)
target0:0:3: Domain Validation skipping write tests
target0:0:3: Ending Domain Validation
SCSI device sdd: 17773524 512-byte hdwr sectors (9100 MB)
sdd: Write Protect is off
sdd: Mode Sense: b3 00 00 08
SCSI device sdd: drive cache: write through
SCSI device sdd: 17773524 512-byte hdwr sectors (9100 MB)
sdd: Write Protect is off
sdd: Mode Sense: b3 00 00 08
SCSI device sdd: drive cache: write through
sdd: sdd1 sdd2 sdd3
sd 0:0:3:0: Attached scsi disk sdd
scsi 0:0:4:0: Direct-Access SEAGATE ST373307LC 0003 PQ: 0 ANSI: 3
scsi0:A:4:0: Tagged Queuing enabled. Depth 253
target0:0:4: Beginning Domain Validation
target0:0:4: wide asynchronous
target0:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 8)
target0:0:4: Domain Validation skipping write tests
target0:0:4: Ending Domain Validation
SCSI device sde: 143374744 512-byte hdwr sectors (73408 MB)
sde: Write Protect is off
sde: Mode Sense: ab 00 10 08
SCSI device sde: drive cache: write back w/ FUA
SCSI device sde: 143374744 512-byte hdwr sectors (73408 MB)
sde: Write Protect is off
sde: Mode Sense: ab 00 10 08
SCSI device sde: drive cache: write back w/ FUA
sde: sde1
sd 0:0:4:0: Attached scsi disk sde
ahc_pci:0:5:1: Host Adapter Bios disabled. Using default SCSI device
parameters
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7895 Ultra SCSI adapter>
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 19, io base 0x00001840
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed
soon!
hda: Disabling (U)DMA for CD-532E-A (blacklisted)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.05
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 15609 blocks, 131072 bytes/block, largest block
is 131098 bytes.
cloop: loaded 128 blocks into cache.
ISO 9660 Extensions: RRIP_1991A
aufs 2.6.19-20061211
Freeing unused kernel memory: 336k freed
apm: BIOS not found.
cpufreq: No nForce2 chipset.
powernow: This module only works with AMD K7 CPUs
Linux video capture interface: v2.00
piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:00:09.0, irq: 17, latency: 132, mmio: 0xf8103000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom 1-0050: Hauppauge model 61205, rev B2M , serial# 3228492
tveeprom 1-0050: tuner model is Philips FI1246 (idx 6, type 1)
tveeprom 1-0050: TV standards PAL(I) (eeprom 0x10)
tveeprom 1-0050: audio processor is None (idx 0)
tveeprom 1-0050: has no radio
bttv0: Hauppauge eeprom indicates model#61205
bttv0: using tuner=1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:11: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 1-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))
tuner 1-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 256M @ 0x40000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
e100: eth0: e100_probe: addr 0xf8102000, irq 19, MAC addr 00:E0:18:C1:03:98
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878_probe: card id=[0x13eb0070], Unknown card.
Exiting..
bt878: probe of 0000:00:09.1 failed with error -22
e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
NET: Registered protocol family 17
e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
eth0: no IPv6 routers present
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised:
dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 257032k swap on /dev/sdb3. Priority:-1 extents:1 across:257032k
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 292856k swap on /dev/sdc3. Priority:-2 extents:1 across:292856k
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 257032k swap on /dev/sdd3. Priority:-3 extents:1 across:257032k
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
eth0: no IPv6 routers present
root@Knoppix:/ramdisk/home/knoppix# cjbell@intel01:~$
--
Chris Bell
Reply to: