--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Can't open /dev/tty2: No such file or directory in d-i
- From: Martin Michlmayr <tbm@cyrius.com>
- Date: Mon, 31 Mar 2008 23:29:29 +0200
- Message-id: <20080331212929.GA11949@deprecation.cyrius.com>
Package: busybox
Version: 1:1.9.1-3
Severity: important
With a daily installer on Cobalt (mipsel) and NSLU2 (arm), I now get
the following messsages repeated on the serial console all the time:
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
Can't open /dev/tty4: No such file or directory
A daily from 2008-03-22 doesn't show this wheras one from 2008-03-23
does. This coincides nicely with the upload of the new busybox.
Putting the old busybox in the initrd makes it work again.
Note that those machines don't have tty2-4.
The log is attached.
--
Martin Michlmayr
http://www.cyrius.com/
Linux version 2.6.22-3-r5k-cobalt (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 Mon Nov 12 15:51:33 UTC 2007
CPU revision is: 000028a0
FPU revision is: 000028a0
Determined physical RAM map:
memory: 05000000 @ 00000000 (usable)
Initial ramdisk at: 0x80362000 (4956869 bytes)
Built 1 zonelists. Total pages: 20320
Kernel command line: rd_start=0x80362000 rd_size=0x4ba2c5 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 72832k/81920k available (2189k kernel code, 9052k reserved, 498k data, 124k init, 0k highmem)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
Cobalt board ID: 6
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4840k freed
audit: initializing netlink socket (disabled)
audit(946684801.976:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
�serial8250.0: ttyS0 at MMIO 0x1c800000 (irq = 21) is a ST16650V2
console handover: boot [early0] -> real [ttyS0]
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
PCI: Enabling device 0000:00:07.0 (0041 -> 0043)
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0x12040000, 00:10:E0:00:D5:B2, IRQ 19.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio
hda: ST38410A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IRQ probe failed (0xff3bbffa)
hdc: IRQ probe failed (0xff3bbffa)
hdd: IRQ probe failed (0xff3bbffa)
hdd: IRQ probe failed (0xff3bbffa)
hdc: IRQ probe failed (0xff3bbffa)
hdc: IRQ probe failed (0xff3bbffa)
hdd: IRQ probe failed (0xff3bbffa)
hdd: IRQ probe failed (0xff3bbffa)
hda: max request size: 128KiB
hda: 16841664 sectors (8622 MB) w/512KiB Cache, CHS=16708/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 >
physmap platform flash device: 00080000 at 1fc00000
Found: AMD AM29F040
physmap-flash.0: Found 1 x8 devices at 0x0 in 8-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 1 MTD partitions on "physmap-flash.0":
0x00000000-0x00080000 : "firmware"
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc_cmos rtc_cmos: setting the system clock to 2008-03-31 21:22:50 (1206998570)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
Setting up filesystem, please wait ...
Starting system log daemon: syslogd, klogd.
[1;24r[4l(B)0[m[37m[40m[1;24r[H[J[1;1H [2;1H [3;1H [4;1H [5;1H [6;1H [7;1H [8;1H [9;1H [10;1H [11;1H [12;1H [13;1H [14;1H [15;1H [16;1H [17;1H [18;1H [19;1H [20;1H [21;1H [22;1H [23;1H [24;1H [24;79H [4h [4l[24;1H[m[0m[m
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
[1;24r[4l(B)0[m[37m[40m[1;24r[H[J[1;1H [2;1H [3;1H [4;1H [5;1H [6;1H [7;1H [8;1H [9;1H [10;1H [11;1H [12;1H [13;1H [14;1H [15;1H [16;1H [17;1H [18;1H [19;1H [20;1H [21;1H [22;1H [23;1H [24;1H [24;79H [4h [4l[24;1H[m[0m[m
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
[1;24r[4l(B)0[m[37m[40m[1;24r[H[J[1;1H[1m[37m[44m [2;1H [3;1H [4;1H [5;1H [6;1H [7;1H [8;1H [9;1H [10;1H [11;1H [12;1H [13;1H [14;1H [15;1H [16;1H [17;1H [18;1H [19;1H [20;1H [21;1H [22;1H [23;1H [24;1H [24;79H [4h [4l[1;1H[9;3H[m[30m[47mlqqqqqqqqqqqqqqqqqqqqqu[m[30m[47m [31mDetecting network hardware[30m [30m[47mtqqqqqqqqqqqqqqqqqqqqqqk[10;3Hx[m[30m[47m [30m[47mx[m[1m[37m[40m [11;3H[m[30m[47mx[m[30m[47m [35C[1m[37m[44m0%[34C[m[30m[47m [30m[47mx[m[1m[37m[40m [12;3H[m[30m[47mx[m[30m[47m [30m[47mx[m[1m[37m[40m [13;3H[m[30m[47mx[m[30m[47m [30m[47mx[m[1m[37m[40m [14;3H[m[30m[47mx[m[30m[47m [30m[47mx[m[1m[37m[40m [15;3H[m[30m[47mmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj[m[1m[37m[40m [16;4H [13;5H[m[30m[47mDetecting hardware, please wait...[13;5H
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
[11;5H[1m[37m[41m [34C[44m2[13;5H[11;6H[41m [32C[44m5[13;5H[11;8H[41m 95% [13;5H
Can't open /dev/tty4: No such file or directory
Can't open /dev/tty2: No such file or directory
Can't open /dev/tty3: No such file or directory
--- End Message ---
--- Begin Message ---
Source: busybox
Source-Version: 1:1.9.2-3
We believe that the bug you reported is fixed in the latest version of
busybox, which is due to be installed in the Debian FTP archive:
busybox-static_1.9.2-3_amd64.deb
to pool/main/b/busybox/busybox-static_1.9.2-3_amd64.deb
busybox-udeb_1.9.2-3_amd64.udeb
to pool/main/b/busybox/busybox-udeb_1.9.2-3_amd64.udeb
busybox_1.9.2-3.diff.gz
to pool/main/b/busybox/busybox_1.9.2-3.diff.gz
busybox_1.9.2-3.dsc
to pool/main/b/busybox/busybox_1.9.2-3.dsc
busybox_1.9.2-3_amd64.deb
to pool/main/b/busybox/busybox_1.9.2-3_amd64.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 473659@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Bastian Blank <waldi@debian.org> (supplier of updated busybox package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sat, 12 Apr 2008 17:23:30 +0200
Source: busybox
Binary: busybox busybox-static busybox-udeb
Architecture: source amd64
Version: 1:1.9.2-3
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Bastian Blank <waldi@debian.org>
Description:
busybox - Tiny utilities for small and embedded systems
busybox-static - Standalone rescue shell with tons of builtin utilities
busybox-udeb - Tiny utilities for the debian-installer (udeb)
Closes: 473659
Changes:
busybox (1:1.9.2-3) unstable; urgency=low
.
* Readd package version into greeting.
* Ignore init action if device is not available. (closes: #473659)
Checksums-Sha1:
25edacab2e6579b48fd7f83bc46efca3d7e43531 1067 busybox_1.9.2-3.dsc
b24ede2ca977d1b056e10f83aec6f0879a87cf97 23117 busybox_1.9.2-3.diff.gz
1ef3d8729b40f397c801e97f143cb1e0fd0f82b8 325272 busybox_1.9.2-3_amd64.deb
c8c8d4cceb0cb4752f2a9636df85acfa4983e365 919488 busybox-static_1.9.2-3_amd64.deb
ecc290c53e0d4bfe0419887ad76d5c71633eefb4 135150 busybox-udeb_1.9.2-3_amd64.udeb
Checksums-Sha256:
66835fcca1416afe88ccbd4df7b2309ba8df77ab5464b31c611e383e56a0c418 1067 busybox_1.9.2-3.dsc
e45e605822f0ecba6810664a318e60d62300da6830518b7be8344c10c64c8936 23117 busybox_1.9.2-3.diff.gz
40c27fba6672b77e80aea1b848a08422e88849a917885fdf6fdf4fa7d6cfac65 325272 busybox_1.9.2-3_amd64.deb
bcdcbf6c22d4bc277628ed2e93bf64fe82a70f1cdbf75840f75a2d7e4b227282 919488 busybox-static_1.9.2-3_amd64.deb
21d10b40631640a858a6a83d54fa8786af12c575e44b1f03b90d91526dbefa18 135150 busybox-udeb_1.9.2-3_amd64.udeb
Files:
e6ff073549f928a2d628a2c8cc62394f 1067 utils optional busybox_1.9.2-3.dsc
4013ebf1d8adcbfe348d3e44ba33a825 23117 utils optional busybox_1.9.2-3.diff.gz
cf71875e36d3007e9705069ef0a79254 325272 utils optional busybox_1.9.2-3_amd64.deb
736eeb70bfc3c2a9e748e478aebafbfd 919488 shells extra busybox-static_1.9.2-3_amd64.deb
fb99348724aafad579bea529fc7931a5 135150 debian-installer extra busybox-udeb_1.9.2-3_amd64.udeb
Package-Type: udeb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iEYEARECAAYFAkgA1bYACgkQxWtQqFixGB4wXwCfV+1uIjAFHgOXcSVNmnSyfGpt
LokAn1R2JB5kslAdj7h86W7hwopSwgsH
=SAkN
-----END PGP SIGNATURE-----
--- End Message ---