Bug#417915: installation-reports: Install on HP DL380 G5 fails with LILO, succeeds with GRUB
Package: installation-reports
Version: etch d-i rc2
Severity: normal
-- Package-specific info:
Boot method: network
Image version: netboot, etch, rc2, http://ftp.nl.debian.org/debian/dists/testing/main/installer-i386/rc2/images/netboot/netboot.tar.gz
Date: <Date and time of the install>
Machine: HP ProLiant DL380 G5
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
I did an expert install of etch rc2 on an HP DL380 G5. Selected LILO as bootloader, but it fails when
installing. /var/log/installer/syslog doesn't give any useful information:
> Apr 5 13:43:57 main-menu[1284]: INFO: Falling back to the package description for auto-install
> Apr 5 13:43:57 main-menu[1284]: INFO: Falling back to the package description for ai-choosers
> Apr 5 13:43:57 main-menu[1284]: INFO: Menu item 'lilo-installer' selected
> Apr 5 13:43:57 main-menu[1284]: WARNING **: Configuring 'lilo-installer' failed with error code 1
> Apr 5 13:43:57 main-menu[1284]: WARNING **: Menu item 'lilo-installer' failed.
> Apr 5 13:44:01 main-menu[1284]: INFO: Falling back to the package description for auto-install
> Apr 5 13:44:01 main-menu[1284]: INFO: Falling back to the package description for ai-choosers
> Apr 5 13:44:01 main-menu[1284]: INFO: Menu item 'grub-installer' selected
However, installing GRUB works and with that I can finalize the Debian install with success.
Running liloconfig on the installed system gives me:
> WARNING!
>
> Your /etc/fstab configuration file gives device /dev/cciss/c0d0p1 as the
> root filesystem device. This doesn't look to me like an "ordinary" block
> device. Either your fstab is broken and you should fix it, or you are
> using hardware (such as a RAID array) which this simple configuration
> program does not handle.
>
> You should either repair the situation or hand-roll your own
> /etc/lilo.conf configuration file; you can then run /usr/sbin/liloconfig
> again to retry the configuration process. Documentation for LILO can be
> found in /usr/share/doc/lilo/.
Of course, in this case /dev/cciss/c0d0p1 IS an ordinary block device. This might be related to the issue of installing LILO during the Debian install process.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux lava 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev 93)
lspci -nn: 00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev 93)
lspci -nn: 00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 93)
lspci -nn: 00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev 93)
lspci -nn: 00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 93)
lspci -nn: 00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 [8086:25f9] (rev 93)
lspci -nn: 00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 93)
lspci -nn: 00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Error Reporting Registers [8086:25f0] (rev 93)
lspci -nn: 00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset Error Reporting Registers [8086:25f0] (rev 93)
lspci -nn: 00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset Error Reporting Registers [8086:25f0] (rev 93)
lspci -nn: 00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 93)
lspci -nn: 00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 93)
lspci -nn: 00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 93)
lspci -nn: 00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 93)
lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09)
lspci -nn: 00:1c.1 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 [8086:2692] (rev 09)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09)
lspci -nn: 01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02)
lspci -nn: 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03)
lspci -nn: 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 03)
lspci -nn: 01:04.4 USB Controller [0c03]: Hewlett-Packard Company Unknown device [103c:3300]
lspci -nn: 01:04.6 Serial bus controller [0c07]: Hewlett-Packard Company Unknown device [103c:3302]
lspci -nn: 02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2)
lspci -nn: 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11)
lspci -nn: 04:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2)
lspci -nn: 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11)
lspci -nn: 06:00.0 RAID bus controller [0104]: Hewlett-Packard Company Hewlett-Packard Smart Array Controller [103c:3230] (rev 01)
lspci -nn: 09:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01)
lspci -nn: 09:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01)
lspci -nn: 0a:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01)
lspci -nn: 0a:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01)
lspci -nn: 0a:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
lspci -vnn: Capabilities: [6c] Express Root Port (Slot-) IRQ 0
lspci -vnn:
lspci -vnn: 00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev 93)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=09, subordinate=12, sec-latency=0
lspci -vnn: Memory behind bridge: fdf00000-fdffffff
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
lspci -vnn: Capabilities: [6c] Express Root Port (Slot-) IRQ 0
lspci -vnn:
lspci -vnn: 00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 93)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=06, subordinate=08, sec-latency=0
lspci -vnn: I/O behind bridge: 00004000-00004fff
lspci -vnn: Memory behind bridge: fdd00000-fdefffff
lspci -vnn: Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
lspci -vnn: Capabilities: [6c] Express Root Port (Slot-) IRQ 0
lspci -vnn:
lspci -vnn: 00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev 93)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=13, subordinate=15, sec-latency=0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
lspci -vnn: Capabilities: [6c] Express Root Port (Slot-) IRQ 0
lspci -vnn:
lspci -vnn: 00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 93)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=16, subordinate=16, sec-latency=0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
lspci -vnn: Capabilities: [6c] Express Root Port (Slot-) IRQ 0
lspci -vnn:
lspci -vnn: 00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 [8086:25f9] (rev 93)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=17, subordinate=19, sec-latency=0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
lspci -vnn: Capabilities: [6c] Express Root Port (Slot-) IRQ 0
lspci -vnn:
lspci -vnn: 00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 93)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=1a, subordinate=1a, sec-latency=0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
lspci -vnn: Capabilities: [6c] Express Root Port (Slot-) IRQ 0
lspci -vnn:
lspci -vnn: 00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Error Reporting Registers [8086:25f0] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset Error Reporting Registers [8086:25f0] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset Error Reporting Registers [8086:25f0] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 93)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fd]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
lspci -vnn: Memory behind bridge: f8000000-f9ffffff
lspci -vnn: Prefetchable memory behind bridge: 0000000088100000-00000000881fffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot-) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1c.1 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 [8086:2692] (rev 09)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
lspci -vnn: Memory behind bridge: fa000000-fbffffff
lspci -vnn: Prefetchable memory behind bridge: 0000000088200000-00000000882fffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot-) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at 1000 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at 1020 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -vnn: I/O ports at 1040 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 98
lspci -vnn: I/O ports at 1060 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: Memory at f7df0000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Debug port
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: I/O behind bridge: 00002000-00003fff
lspci -vnn: Memory behind bridge: f7e00000-f7ffffff
lspci -vnn: Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
lspci -vnn: Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at 0500 [size=16]
lspci -vnn:
lspci -vnn: 01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fb]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64, IRQ 7
lspci -vnn: Memory at d8000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: I/O ports at 3000 [size=256]
lspci -vnn: Memory at f7ff0000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: [virtual] Expansion ROM at f7e00000 [disabled] [size=128K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: Flags: medium devsel, IRQ 5
lspci -vnn: I/O ports at 2800 [size=256]
lspci -vnn: Memory at f7fe0000 (32-bit, non-prefetchable) [size=512]
lspci -vnn: Capabilities: [f0] Power Management version 3
lspci -vnn:
lspci -vnn: 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 03)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 10
lspci -vnn: I/O ports at 3400 [size=256]
lspci -vnn: Memory at f7fd0000 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: Memory at f7fc0000 (32-bit, non-prefetchable) [size=8K]
lspci -vnn: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: [virtual] Expansion ROM at f7e20000 [disabled] [size=64K]
lspci -vnn: Capabilities: [f0] Power Management version 3
lspci -vnn:
lspci -vnn: 01:04.4 USB Controller [0c03]: Hewlett-Packard Company Unknown device [103c:3300]
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 106
lspci -vnn: I/O ports at 3800 [size=32]
lspci -vnn: Capabilities: [f0] Power Management version 3
lspci -vnn:
lspci -vnn: 01:04.6 Serial bus controller [0c07]: Hewlett-Packard Company Unknown device [103c:3302] (prog-if 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: Flags: medium devsel, IRQ 5
lspci -vnn: Memory at f7ef0000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [f0] Power Management version 3
lspci -vnn:
lspci -vnn: 02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
lspci -vnn: Memory behind bridge: f8000000-f9ffffff
lspci -vnn: Prefetchable memory behind bridge: 0000000088100000-00000000881fffff
lspci -vnn: Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
lspci -vnn: Capabilities: [90] PCI-X bridge device
lspci -vnn: Capabilities: [b0] Power Management version 2
lspci -vnn:
lspci -vnn: 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:7038]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 114
lspci -vnn: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
lspci -vnn: [virtual] Expansion ROM at 88100000 [disabled] [size=2K]
lspci -vnn: Capabilities: [40] PCI-X non-bridge device
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Vital Product Data
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
lspci -vnn:
lspci -vnn: 04:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
lspci -vnn: Memory behind bridge: fa000000-fbffffff
lspci -vnn: Prefetchable memory behind bridge: 0000000088200000-00000000882fffff
lspci -vnn: Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
lspci -vnn: Capabilities: [90] PCI-X bridge device
lspci -vnn: Capabilities: [b0] Power Management version 2
lspci -vnn:
lspci -vnn: 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:7038]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
lspci -vnn: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
lspci -vnn: [virtual] Expansion ROM at 88200000 [disabled] [size=2K]
lspci -vnn: Capabilities: [40] PCI-X non-bridge device
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Vital Product Data
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn:
lspci -vnn: 06:00.0 RAID bus controller [0104]: Hewlett-Packard Company Hewlett-Packard Smart Array Controller [103c:3230] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:3234]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 185
lspci -vnn: Memory at fde00000 (64-bit, non-prefetchable) [size=1M]
lspci -vnn: I/O ports at 4000 [size=256]
lspci -vnn: Memory at fddf0000 (64-bit, non-prefetchable) [size=4K]
lspci -vnn: [virtual] Expansion ROM at 88000000 [disabled] [size=256K]
lspci -vnn: Capabilities: [b0] Express Endpoint IRQ 0
lspci -vnn: Capabilities: [d4] MSI-X: Enable+ Mask- TabSize=4
lspci -vnn: Capabilities: [e0] Power Management version 2
lspci -vnn: Capabilities: [ec] Vital Product Data
lspci -vnn:
lspci -vnn: 09:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=09, secondary=0a, subordinate=11, sec-latency=0
lspci -vnn: Capabilities: [44] Express Upstream Port IRQ 0
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn: Capabilities: [80] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn:
lspci -vnn: 09:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=09, secondary=12, subordinate=12, sec-latency=64
lspci -vnn: Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
lspci -vnn: Capabilities: [6c] Power Management version 2
lspci -vnn: Capabilities: [80] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [d8] PCI-X bridge device
lspci -vnn:
lspci -vnn: 0a:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=0a, secondary=0b, subordinate=0d, sec-latency=0
lspci -vnn: Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn: Capabilities: [80] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn:
lspci -vnn: 0a:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=0a, secondary=0e, subordinate=10, sec-latency=0
lspci -vnn: Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn: Capabilities: [80] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn:
lspci -vnn: 0a:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=0a, secondary=11, subordinate=11, sec-latency=0
lspci -vnn: Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn: Capabilities: [80] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn:
modulemap: 8086:2688 uhci_hcd
modulemap: 8086:2689 uhci_hcd
modulemap: 8086:268a uhci_hcd
modulemap: 8086:268b uhci_hcd
modulemap: 8086:268c ehci_hcd
modulemap: 8086:269e piix
modulemap: 103c:3300 uhci_hcd
modulemap: 14e4:164c bnx2
modulemap: 14e4:164c bnx2
modulemap: 103c:3230 cciss
lsmod: Module Size Used by
lsmod: sd_mod 18832 0
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 1
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: isofs 31928 0
lsmod: ide_disk 14848 0
lsmod: ide_generic 1536 0 [permanent]
lsmod: aec62xx 6912 0 [permanent]
lsmod: alim15x3 11148 0 [permanent]
lsmod: amd74xx 13084 0 [permanent]
lsmod: atiixp 5904 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4736 0 [permanent]
lsmod: cs5530 4992 0 [permanent]
lsmod: cs5535 4352 0 [permanent]
lsmod: cy82c693 4484 0 [permanent]
lsmod: hpt34x 5120 0 [permanent]
lsmod: it821x 7940 0 [permanent]
lsmod: jmicron 4224 0 [permanent]
lsmod: ns87415 4296 0 [permanent]
lsmod: opti621 4228 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9472 0 [permanent]
lsmod: rz1000 2816 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8456 0 [permanent]
lsmod: siimage 11136 0 [permanent]
lsmod: sis5513 12552 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3840 0 [permanent]
lsmod: trm290 4228 0 [permanent]
lsmod: via82cxxx 8452 0 [permanent]
lsmod: usb_storage 71360 0
lsmod: ide_cd 35616 0
lsmod: cdrom 32416 1 ide_cd
lsmod: piix 9220 0 [permanent]
lsmod: generic 5508 0 [permanent]
lsmod: ide_core 107760 31 ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_new,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,piix,generic
lsmod: cciss 51844 3
lsmod: scsi_mod 121352 3 sd_mod,usb_storage,cciss
lsmod: usbserial 28136 0
lsmod: usbkbd 6656 0
lsmod: usbhid 35552 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ehci_hcd 26888 0
lsmod: uhci_hcd 19980 0
lsmod: bnx2 75632 0
lsmod: usbcore 108676 7 usb_storage,usbserial,usbkbd,usbhid,ehci_hcd,uhci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 453396 384 453012 0% /dev
df: tmpfs 453396 384 453012 0% /dev
df: tmpfs 453396 384 453012 0% /.dev
df: /dev/cciss/c0d0p1 67915316 468500 63996860 1% /target
free: total used free shared buffers
free: Mem: 906792 385688 521104 0 26108
free: Swap: 2650684 0 2650684
free: Total: 3557476 385688 3171788
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : Intel(R) Xeon(TM) CPU 3.20GHz
/proc/cpuinfo: stepping : 4
/proc/cpuinfo: cpu MHz : 3200.313
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 6
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 6405.46
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0408-040f : pnp 00:01
/proc/ioports: 04d0-04d1 : pnp 00:01
/proc/ioports: 0500-050f : 0000:00:1f.1
/proc/ioports: 0500-0507 : ide0
/proc/ioports: 0508-050f : ide1
/proc/ioports: 0700-071f : pnp 00:01
/proc/ioports: 0900-0903 : ACPI PM1a_EVT_BLK
/proc/ioports: 0904-0907 : ACPI PM1a_CNT_BLK
/proc/ioports: 0908-090b : ACPI PM_TMR
/proc/ioports: 0928-092f : ACPI GPE0_BLK
/proc/ioports: 0c80-0c83 : EISA device CPQ0762
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-101f : 0000:00:1d.0
/proc/ioports: 1000-101f : uhci_hcd
/proc/ioports: 1020-103f : 0000:00:1d.1
/proc/ioports: 1020-103f : uhci_hcd
/proc/ioports: 1040-105f : 0000:00:1d.2
/proc/ioports: 1040-105f : uhci_hcd
/proc/ioports: 1060-107f : 0000:00:1d.3
/proc/ioports: 1060-107f : uhci_hcd
/proc/ioports: 2000-3fff : PCI Bus #01
/proc/ioports: 2800-28ff : 0000:01:04.0
/proc/ioports: 3000-30ff : 0000:01:03.0
/proc/ioports: 3400-34ff : 0000:01:04.2
/proc/ioports: 3800-381f : 0000:01:04.4
/proc/ioports: 3800-381f : uhci_hcd
/proc/ioports: 4000-4fff : PCI Bus #06
/proc/ioports: 4000-40ff : 0000:06:00.0
/proc/ioports: 4000-40ff : cciss
/proc/iomem: 00000000-0009f3ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f400-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cafff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7fe57fff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 7fe58000-7fe5ffff : ACPI Tables
/proc/iomem: 7fe60000-7fffffff : reserved
/proc/iomem: 88000000-880fffff : PCI Bus #06
/proc/iomem: 88000000-8803ffff : 0000:06:00.0
/proc/iomem: 88100000-881fffff : PCI Bus #02
/proc/iomem: 88100000-881fffff : PCI Bus #03
/proc/iomem: 88100000-881007ff : 0000:03:00.0
/proc/iomem: 88200000-882fffff : PCI Bus #04
/proc/iomem: 88200000-882fffff : PCI Bus #05
/proc/iomem: 88200000-882007ff : 0000:05:00.0
/proc/iomem: d8000000-dfffffff : PCI Bus #01
/proc/iomem: d8000000-dfffffff : 0000:01:03.0
/proc/iomem: f7df0000-f7df03ff : 0000:00:1d.7
/proc/iomem: f7df0000-f7df03ff : ehci_hcd
/proc/iomem: f7e00000-f7ffffff : PCI Bus #01
/proc/iomem: f7e00000-f7e1ffff : 0000:01:03.0
/proc/iomem: f7e20000-f7e2ffff : 0000:01:04.2
/proc/iomem: f7ef0000-f7ef00ff : 0000:01:04.6
/proc/iomem: f7f00000-f7f7ffff : 0000:01:04.2
/proc/iomem: f7fc0000-f7fc1fff : 0000:01:04.2
/proc/iomem: f7fd0000-f7fd07ff : 0000:01:04.2
/proc/iomem: f7fe0000-f7fe01ff : 0000:01:04.0
/proc/iomem: f7ff0000-f7ffffff : 0000:01:03.0
/proc/iomem: f8000000-f9ffffff : PCI Bus #02
/proc/iomem: f8000000-f9ffffff : PCI Bus #03
/proc/iomem: f8000000-f9ffffff : 0000:03:00.0
/proc/iomem: f8000000-f9ffffff : bnx2
/proc/iomem: fa000000-fbffffff : PCI Bus #04
/proc/iomem: fa000000-fbffffff : PCI Bus #05
/proc/iomem: fa000000-fbffffff : 0000:05:00.0
/proc/iomem: fa000000-fbffffff : bnx2
/proc/iomem: fdd00000-fdefffff : PCI Bus #06
/proc/iomem: fddf0000-fddf0fff : 0000:06:00.0
/proc/iomem: fddf0000-fddf0fff : cciss
/proc/iomem: fde00000-fdefffff : 0000:06:00.0
/proc/iomem: fde00000-fdefffff : cciss
/proc/iomem: fdf00000-fdffffff : PCI Bus #09
/proc/iomem: fec00000-fecfffff : reserved
/proc/iomem: fee00000-fee0ffff : reserved
/proc/iomem: ffc00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 173228 IO-APIC-edge timer
/proc/interrupts: 3: 31732 IO-APIC-edge serial
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 200 IO-APIC-edge ide0
/proc/interrupts: 98: 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 106: 92 IO-APIC-level uhci_hcd:usb5
/proc/interrupts: 114: 91319 PCI-MSI eth0
/proc/interrupts: 146: 236510 PCI-MSI-X cciss0
/proc/interrupts: 169: 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb6
/proc/interrupts: 177: 0 IO-APIC-level uhci_hcd:usb2
/proc/interrupts: 185: 0 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 173186
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 906792 kB
/proc/meminfo: MemFree: 520960 kB
/proc/meminfo: Buffers: 26108 kB
/proc/meminfo: Cached: 309704 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 215456 kB
/proc/meminfo: Inactive: 135668 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 906792 kB
/proc/meminfo: LowFree: 520960 kB
/proc/meminfo: SwapTotal: 2650684 kB
/proc/meminfo: SwapFree: 2650684 kB
/proc/meminfo: Dirty: 280 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 15356 kB
/proc/meminfo: Mapped: 1432 kB
/proc/meminfo: Slab: 24392 kB
/proc/meminfo: PageTables: 204 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 3104080 kB
/proc/meminfo: Committed_AS: 18872 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 8320 kB
/proc/meminfo: VmallocChunk: 113308 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=1027 Version=0002
/proc/bus/input/devices: N: Name="HP Virtual Keyboard"
/proc/bus/input/devices: P: Phys=/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=1027 Version=0002
/proc/bus/input/devices: N: Name="HP Virtual Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:01:04.4-1/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=
/proc/bus/input/devices: B: EV=b
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: ABS=3
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 70 structures occupying 1909 bytes.
dmidecode: Table at 0x000EE000.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: HP
dmidecode: Version: P56
dmidecode: Release Date: 12/28/2006
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 4096 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0100, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: HP
dmidecode: Product Name: ProLiant DL380 G5
dmidecode: Version: Not Specified
dmidecode: Serial Number: GB8649Y4LX
dmidecode: UUID: 34313533-3038-4742-3836-343959344C58
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0300, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: HP
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version: Not Specified
dmidecode: Serial Number: GB8649Y4LX
dmidecode: Asset Tag:
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0400, DMI type 4, 40 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Proc 1
dmidecode: Type: Central Processor
dmidecode: Family: Xeon
dmidecode: Manufacturer: Intel
dmidecode: ID: 64 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 6, Stepping 4
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Not Specified
dmidecode: Voltage: 1.4 V
dmidecode: External Clock: 1066 MHz
dmidecode: Max Speed: 4800 MHz
dmidecode: Current Speed: 3200 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0710
dmidecode: L2 Cache Handle: 0x0720
dmidecode: L3 Cache Handle: 0x0730
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0406, DMI type 4, 40 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Proc 2
dmidecode: Type: Central Processor
dmidecode: Family: Xeon
dmidecode: Manufacturer: Intel
dmidecode: ID: 00 00 00 00 00 00 00 00
dmidecode: Signature: Type 0, Family 0, Model 0, Stepping 0
dmidecode: Flags: None
dmidecode: Version: Not Specified
dmidecode: Voltage: 1.4 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 4800 MHz
dmidecode: Current Speed: Unknown
dmidecode: Status: Unpopulated
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0716
dmidecode: L2 Cache Handle: 0x0726
dmidecode: L3 Cache Handle: 0x0736
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0710, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 1 Internal L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 128 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0716, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 2 Internal L1 Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 1
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 128 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0720, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 1 Internal L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 4096 KB
dmidecode: Maximum Size: 16384 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unknown
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0726, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 2 Internal L2 Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 2
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 16384 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unknown
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0730, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 1 Internal L3 Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 8192 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unknown
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0736, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 2 Internal L3 Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 8192 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unknown
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0801, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J58
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: USB Port 1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0802, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J58
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: USB Port 2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0803, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J58
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: USB Port 3
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0804, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J58
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: USB Port 4
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0901, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI-E Slot 1
dmidecode: Type: x4 PCI Express
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0902, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI-E Slot 2
dmidecode: Type: x4 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0903, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI-E Slot 3
dmidecode: Type: x4 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0904, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI-E Slot 4
dmidecode: Type: x8 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0905, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI-E Slot 5
dmidecode: Type: x8 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0B00, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: Product ID: 415308-425
dmidecode:
dmidecode: Handle 0x1000, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 32 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 8
dmidecode:
dmidecode: Handle 0x1100, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 1
dmidecode: Locator: DIMM 1A
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode:
dmidecode: Handle 0x1101, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 3
dmidecode: Locator: DIMM 2C
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1102, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 1
dmidecode: Locator: DIMM 3A
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode:
dmidecode: Handle 0x1103, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 3
dmidecode: Locator: DIMM 4C
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1104, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 2
dmidecode: Locator: DIMM 5B
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1105, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 4
dmidecode: Locator: DIMM 6D
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1106, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 2
dmidecode: Locator: DIMM 7B
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1107, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: <OUT OF SPEC>
dmidecode: Set: 4
dmidecode: Locator: DIMM 8D
dmidecode: Bank Locator: Not Specified
dmidecode: Type: <OUT OF SPEC>
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1300, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Array Handle: 0x1000
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x1400, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Device Handle: 0x1100
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1401, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1101
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1402, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Device Handle: 0x1102
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1403, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1103
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1404, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1104
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1405, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1105
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1406, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1106
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1407, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1107
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x2000, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x2600, DMI type 38, 18 bytes
dmidecode: IPMI Device Information
dmidecode: Interface Type: KCS (Keyboard Control Style)
dmidecode: Specification Version: 2.0
dmidecode: I2C Slave Address: 0x10
dmidecode: NV Storage Device: Not Present
dmidecode: Base Address: 0x0000000000000CA2 (I/O)
dmidecode: Register Spacing: Successive Byte Boundaries
dmidecode:
dmidecode: Handle 0xC100, DMI type 193, 7 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C1 07 00 C1 01 01 02
dmidecode: Strings:
dmidecode: 06/13/2006
dmidecode: 11/09/2005
dmidecode:
dmidecode: Handle 0xC200, DMI type 194, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C2 05 00 C2 01
dmidecode:
dmidecode: Handle 0xC300, DMI type 195, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C3 05 00 C3 01
dmidecode: Strings:
dmidecode: $0E110762
dmidecode:
dmidecode: Handle 0xC400, DMI type 196, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C4 05 00 C4 00
dmidecode:
dmidecode: Handle 0xC500, DMI type 197, 10 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C5 0A 00 C5 00 04 00 01 FF 01
dmidecode:
dmidecode: Handle 0xC506, DMI type 197, 10 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C5 0A 06 C5 06 04 00 00 FF 02
dmidecode:
dmidecode: Handle 0xD300, DMI type 211, 7 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D3 07 00 D3 00 04 4E
dmidecode:
dmidecode: Handle 0xD306, DMI type 211, 7 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D3 07 06 D3 06 04 00
dmidecode:
dmidecode: Handle 0xC600, DMI type 198, 11 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C6 0B 00 C6 17 00 00 01 3C 00 01
dmidecode:
dmidecode: Handle 0xC700, DMI type 199, 64 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C7 40 00 C7 60 00 00 00 06 20 12 07 F7 06 00 00
dmidecode: 44 00 00 00 06 20 23 05 F6 06 00 00 33 00 00 00
dmidecode: 06 20 01 05 F5 06 00 00 26 00 00 00 06 20 12 03
dmidecode: F4 06 00 00 02 00 00 00 05 20 15 12 64 0F 00 00
dmidecode:
dmidecode: Handle 0xCD00, DMI type 205, 22 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CD 16 00 CD 01 01 46 41 54 78 00 00 E0 FF 00 00
dmidecode: 00 00 00 00 0D 00
dmidecode:
dmidecode: Handle 0xCA00, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 00 CA 00 11 FF 01
dmidecode:
dmidecode: Handle 0xCA01, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 01 CA 01 11 FF 02
dmidecode:
dmidecode: Handle 0xCA02, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 02 CA 02 11 FF 03
dmidecode:
dmidecode: Handle 0xCA03, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 03 CA 03 11 FF 04
dmidecode:
dmidecode: Handle 0xCA04, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 04 CA 04 11 FF 05
dmidecode:
dmidecode: Handle 0xCA05, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 05 CA 05 11 FF 06
dmidecode:
dmidecode: Handle 0xCA06, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 06 CA 06 11 FF 07
dmidecode:
dmidecode: Handle 0xCA07, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 07 CA 07 11 FF 08
dmidecode:
dmidecode: Handle 0xD100, DMI type 209, 20 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D1 14 00 D1 00 03 00 18 FE 7D 50 A4 00 05 00 18
dmidecode: FE 7D 50 A2
dmidecode:
dmidecode: Handle 0xD400, DMI type 212, 24 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 18 00 D4 24 43 52 55 00 F8 F6 FF 00 00 00 00
dmidecode: 00 40 00 00 00 00 00 00
dmidecode:
dmidecode: Handle 0xD500, DMI type 213, 28 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D5 1C 00 D5 00 00 36 00 00 00 BF 1F 00 00 46 00
dmidecode: 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode:
dmidecode: Handle 0xD600, DMI type 214, 44 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D6 2C 00 D6 31 31 00 02 0E 20 00 00 13 20 00 00
dmidecode: 00 60 00 00 00 20 00 00 02 20 00 00 04 20 00 00
dmidecode: 06 20 00 00 0C 20 00 00 08 20 00 00
dmidecode:
dmidecode: Handle 0xD700, DMI type 215, 6 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D7 06 00 D7 00 05
dmidecode:
dmidecode: Handle 0xDB00, DMI type 219, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DB 08 00 DB DF 00 00 00
dmidecode:
dmidecode: Handle 0xDC00, DMI type 220, 45 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DC 2D 00 DC 08 00 00 C5 00 00 01 00 C5 00 01 02
dmidecode: 00 C5 01 00 03 00 C5 01 01 04 06 C5 00 00 05 06
dmidecode: C5 00 01 06 06 C5 01 00 07 06 C5 01 01
dmidecode:
dmidecode: Handle 0xDC01, DMI type 218, 45 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DA 2D 01 DC 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode: 00 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode:
dmidecode: Handle 0xDD00, DMI type 221, 20 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DD 14 00 DD 00 03 00 18 FE 7D 50 A5 00 05 00 18
dmidecode: FE 7D 50 A3
dmidecode:
dmidecode: Handle 0x7F00, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: nic-shared-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Shared NIC drivers
Package: download-installer
Status: install ok installed
Version: 1.15
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: nic-pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Common PCMCIA NIC drivers
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support
Package: choose-mirror
Status: install ok installed
Version: 2.13
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: network-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: gpgv-udeb
Status: install ok installed
Version: 1.4.6-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: nic-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: nic-modules
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Description: Common NIC drivers
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver
Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.15
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16), gpgv-udeb
Description: Fetch modules from the Internet
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: nic-extra-modules
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Description: Rare NIC drivers
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: choose-mirror-bin
Status: install ok installed
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers
Package: crc-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: crc-modules
Depends: kernel-image-2.6.18-4-486-di
Description: CRC modules
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: zlib1g-udeb
Status: install ok installed
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules
Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support
Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem
Package: debian-installer
Status: install ok installed
Version: netboot-20070308
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: ide-core-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ide-core-modules
Description: IDE support
This package contains core IDE support for the Linux kernel.
Package: ide-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 432
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok half-configured
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: parport-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: parport-modules
Description: Parallel port support
This package contains parallel port drivers for the Linux kernel.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
This package contains PCMCIA storage drivers for the Linux kernel.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 404
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 704
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
This package contains very common SCSI drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: scsi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1040
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: scsi-modules
Description: SCSI drivers
This package contains SCSI drivers for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Reply to: