Bug#417231: installation-report
Package: installation-reports
Boot method: <How did you boot the installer? CD? floppy? network?>
Image version: <Fill in date and from where you got the image>
Date: <Date and time of the install>
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Processor:
Memory:
Partitions: <df -Tl will do; the raw partition table is preferred>
Output of lspci:
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
(rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200
TurboCache(TM)] (rev a1)
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 13)
output of lspci -n:
00:00.0 0580: 10de:005e (rev a3)
00:01.0 0601: 10de:0050 (rev a3)
00:01.1 0c05: 10de:0052 (rev a2)
00:02.0 0c03: 10de:005a (rev a2)
00:02.1 0c03: 10de:005b (rev a3)
00:04.0 0401: 10de:0059 (rev a2)
00:06.0 0101: 10de:0053 (rev f2)
00:07.0 0101: 10de:0054 (rev f3)
00:08.0 0101: 10de:0055 (rev f3)
00:09.0 0604: 10de:005c (rev a2)
00:0a.0 0680: 10de:0057 (rev a3)
00:0b.0 0604: 10de:005d (rev a3)
00:0c.0 0604: 10de:005d (rev a3)
00:0d.0 0604: 10de:005d (rev a3)
00:0e.0 0604: 10de:005d (rev a3)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 10de:0161 (rev a1)
05:0b.0 0c00: 104c:8023
05:0c.0 0200: 11ab:4320 (rev 13)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
When installing base system, installer said that some packages are
corrupted. (I wrote my net-install CD using K3b and I checked the MD5
checksum before recording disk.)
I ended not installing the base system. When I booted into the system I
installed xorg, kde-core and kdm. Everything works now.
Thoughts:
Expertgui does not give that much more options than typical installgui.
So, I thought maybe just a button on each screen to enter expert mode
when needed.
Extertgui allowed me to choose some extra steps -- e.g. choose network
mirror, which I OKed and later was asked to choose it twice. So, why
giving extra options if they are already part of the standard
installation process?
Thoughts 2:
why not having "install a minimal graphical system" (say,
xserver-xorg-core, kde-core, kdm)
Thoughts 3:
Why not split tingSQL database task into mySQL and POSTGRE and other. I
want mySQL but I do not want to setup everything. Basically, I am
suggesting a finer task selection.
Thought 4:
Great work! From 'installgui' to running system with graphical interface
in less than an hour. If had no problems probably could be less than 30mins.
Reply to: