[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#417051: installation report



Package: installation-reports

> Boot method: <How did you boot the installer? CD? floppy? network?>

CD.

> Image version: <Full URL to image you downloaded is best>

http://cdimage.debian.org/cdimage/etch_di_rc2/i386/iso-cd/debian-testing-i386-CD-1.iso
17-Mar-2007 22:59

> Date: <Date and time of the install>
Mar 30 2007

> Machine: <Description of machine (eg, IBM Thinkpad R32)>
Self-build machine

> Processor: 
AMD Athlon(TM) XP 2600+

> Memory:
acrobaat:~# free
             total       used       free     shared    buffers     cached
Mem:        906792     817876      88916          0      79604     403468
-/+ buffers/cache:     334804     571988
Swap:       979832         60     979772

> Partitions: <df -Tl will do; the raw partition table is preferred>

acrobaat:~# df -Tl
Bestandssysteem Type   1K-blokken     Gebruikt Beschikbaar Gebruikt%
Aangekoppeld op
/dev/md1  reiserfs   243208572  65347884 177860688  27% /
tmpfs        tmpfs      453396         0    453396   0% /lib/init/rw
udev         tmpfs       10240        60     10180   1% /dev
tmpfs        tmpfs      453396         0    453396   0% /dev/shm

> Output of lspci -nn and lspci -vnn:

acrobaat:~# lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600
AGP] Host Bridge [1106:3189]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8235 PCI Bridge
[1106:b168]
00:0d.0 Network controller [0280]: AVM Audiovisuelles MKTG & Computer
System GmbH Fritz!PCI v2.0 ISDN [1244:0e00] (rev 02)
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80)
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80)
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0
[1106:3104] (rev 82)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge
[1106:3177]
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102
[Rhine-II] [1106:3065] (rev 74)
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV18
[GeForce4 MX 4000 AGP 8x] [10de:0185] (rev a4)

acrobaat:~# lspci -vnn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600
AGP] Host Bridge [1106:3189]
        Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:807f]
        Flags: bus master, 66MHz, medium devsel, latency 0
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [80] AGP version 3.5
        Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8235 PCI Bridge
[1106:b168] (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: ee000000-efefffff
        Prefetchable memory behind bridge: eff00000-f7ffffff
        Capabilities: [80] Power Management version 2

00:0d.0 Network controller [0280]: AVM Audiovisuelles MKTG & Computer
System GmbH Fritz!PCI v2.0 ISDN [1244:0e00] (rev 02)
        Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH
Fritz!PCI v2.0 ISDN [1244:0e00]
        Flags: medium devsel, IRQ 185
        Memory at ed800000 (32-bit, non-prefetchable) [size=32]
        I/O ports at d800 [size=32]
        Capabilities: [40] Power Management version 2

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at d400 [size=32]
        Capabilities: [80] Power Management version 2

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at d000 [size=32]
        Capabilities: [80] Power Management version 2

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at b800 [size=32]
        Capabilities: [80] Power Management version 2

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0
[1106:3104] (rev 82) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard rev 1.01
[1043:80a1]
        Flags: bus master, medium devsel, latency 32, IRQ 169
        Memory at ed000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge
[1106:3177]
        Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev
06) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard rev. 1.01
[1043:80a1]
        Flags: bus master, medium devsel, latency 32, IRQ 255
        I/O ports at b400 [size=16]
        Capabilities: [c0] Power Management version 2

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
        Subsystem: ASUSTeK Computer Inc. A7V8X-X Motherboard [1043:80a1]
        Flags: medium devsel, IRQ 193
        I/O ports at e000 [size=256]
        Capabilities: [c0] Power Management version 2

00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102
[Rhine-II] [1106:3065] (rev 74)
        Subsystem: ASUSTeK Computer Inc. A7V8X-X Motherboard [1043:80a1]
        Flags: bus master, stepping, medium devsel, latency 32, IRQ 177
        I/O ports at b000 [size=256]
        Memory at ec800000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV18
[GeForce4 MX 4000 AGP 8x] [10de:0185] (rev a4) (prog-if 00 [VGA])
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
        Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at effe0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0

> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
> 
> Initial boot:           [0]
> Detect network card:    [0]
> Configure network:      [0]
> Detect CD:              [0]
> Load installer modules: [0]
> Detect hard drives:     [0]
> Partition hard drives:  [0]
> Install base system:    [0]
> Clock/timezone setup:   [0]
> User/password setup:    [0]
> Install tasks:          [0]
> Install boot loader:    [0]
> Overall install:        [0]
> 
> Comments/Problems:

Strange default machinename:  Knoppix

A very high default resolution: 1920×1200
I think this is the theoretical maximum the CRT monitor (IIyama
HM903D/DT) and VGA card, but in practise it was not OK.

It did install a wrong kernel:
acrobaat:~# uname -a
Linux acrobaat 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 GNU/Linux

Because this customer has a slow internet connection, I used a full
install CD. I did still added a mirror-server for apt-get.
The installer did not take the packages from the CD, but from the
mirror-server. When the installer was ready then apt-get takes the
packages from the CD. This was exactly not what I want...

> <Description of the install, in prose, and any thoughts, comments
>       and ideas you had during the initial install.>

The default machine-name will be an error.

I think it is better to use a maximum default resolution of 1200x1024
for X, even when the VGA-card and the monitor can do better.

It would be better if the installer automatically installs a K7 kernel,
if this is the best choice.

I think it would be better if the installer would install automatically
from CD, if I have a full-CD, and automatically from internet, if I have
a netinstall CD.

With regards,
Paul van der Vlis.


-- 
http://www.vandervlis.nl/




Reply to: