Bug#405737: Installation report : etch(daily build 20070103-21:52 ) installgui fails on i810
Package: installation-reports (bug report : installgui fails)
Boot method: CD
Image version: Debian GNU/Linux testing "Etch" - Official Snapshot
i386 NETINST Binary-1 20070103-21:52 (/.disk/info)
Date: Jan 5 22:59:22 (IST)
Machine: Assembled PC x86.
Processor: Intel Pentium III (Katmai) 550MHz
Memory: 128 MB
Partitions: (output of fdisk -l)
Disk /dev/hda: 80.0 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 2 16033+ 11 Hidden FAT12
/dev/hda2 3 975 7815622+ 83 Linux
/dev/hda3 976 1583 4883760 c W95 FAT32 (LBA)
/dev/hda4 1584 9733 65464875 5 Extended
/dev/hda5 1584 2556 7815591 83 Linux
/dev/hda6 2557 2618 497983+ 82 Linux swap / Solaris
/dev/hda7 2619 6265 29294496 83 Linux
/dev/hda8 6266 6873 4883728+ 83 Linux
/dev/hda9 6874 7481 4883728+ 83 Linux
/dev/hda10 9126 9733 4883728+ 83 Linux
Output of lspci -nn :
0000:00:00.0 0600: 8086:7120 (rev 03)
0000:00:01.0 0300: 8086:7121 (rev 03)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f.1 0101: 8086:2411 (rev 02)
0000:00:1f.2 0c03: 8086:2412 (rev 02)
0000:00:1f.5 0401: 8086:2415 (rev 02)
0000:01:0a.0 0200: 10ec:8139 (rev 10)
Output of lspci -vnn:
0000:00:00.0 0600: 8086:7120 (rev 03)
Subsystem: 8086:7120
Flags: bus master, fast devsel, latency 0
0000:00:01.0 0300: 8086:7121 (rev 03)
Subsystem: 8086:7121
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Memory at de000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [dc] Power Management version 1
0000:00:1e.0 0604: 8086:2418 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: 10000000-100fffff
0000:00:1f.0 0601: 8086:2410 (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 0101: 8086:2411 (rev 02) (prog-if 80 [Master])
Subsystem: 8086:2411
Flags: bus master, medium devsel, latency 0
I/O ports at f000 [size=16]
0000:00:1f.2 0c03: 8086:2412 (rev 02)
Subsystem: 8086:2412
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at d000 [size=32]
0000:00:1f.5 0401: 8086:2415 (rev 02)
Subsystem: 11d4:0048
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at d800 [size=256]
I/O ports at dc00 [size=64]
0000:01:0a.0 0200: 10ec:8139 (rev 10)
Subsystem: 10ec:8139
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at c000 [size=256]
Memory at dd000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 10000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
bootparameters : installgui
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [ ]
This was O.K when a normal textmode install is used.
Configure network: [ ]
Detect CD: [O]
Load installer modules: [E]
DirectFB initialisation fails.
then init keeps restarting debian-installer for ever.
Detect hard drives: [O]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
I am using the daily-build netinst image burnt onto a CDRW using cdrecord. Once
the bootsplash is shown, I used installgui at boot-prompt. Booting is perfect in
all respects until the framebuffer initialisation happens. A page full of
DirectFB initialisation stuff is shown, then screen blanks and repeats the same
thing. I used suspend (CTRL+S) to hold the screen. From vc4 it was clear that
debian-installer was the one which was being repeatedly invoked. So I used vc2
shell to do 'log-output debian-installer' to get pretty much the same output as
on vc1. And here is the final /var/log/syslog
---------------------------------syslog
start-----------------------------------------
Jan 5 22:59:22 syslogd started: BusyBox v1.1.3
Jan 5 22:59:22 kernel: klogd started: BusyBox v1.1.3 (Debian 1:1.1.3-3)
Jan 5 22:59:22 kernel: Linux version 2.6.17-2-486 (Debian 2.6.17-9)
(waldi@debian.org) (gcc version 4.1.2 20060901 (prerelease) (Debian
4.1.1-13)) #1 Wed Sep 13 15:56:30 UTC 2006
Jan 5 22:59:22 kernel: BIOS-provided physical RAM map:
Jan 5 22:59:22 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jan 5 22:59:22 kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Jan 5 22:59:22 kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Jan 5 22:59:22 kernel: BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable)
Jan 5 22:59:22 kernel: BIOS-e820: 0000000007ef0000 -
0000000007ef3000 (ACPI NVS)
Jan 5 22:59:22 kernel: BIOS-e820: 0000000007ef3000 -
0000000007f00000 (ACPI data)
Jan 5 22:59:22 kernel: BIOS-e820: 00000000ffb00000 -
0000000100000000 (reserved)
Jan 5 22:59:22 kernel: 126MB LOWMEM available.
Jan 5 22:59:22 kernel: On node 0 totalpages: 32496
Jan 5 22:59:22 kernel: DMA zone: 4096 pages, LIFO batch:0
Jan 5 22:59:22 kernel: Normal zone: 28400 pages, LIFO batch:7
Jan 5 22:59:22 kernel: DMI 2.2 present.
Jan 5 22:59:22 kernel: ACPI: RSDP (v000 IntelR
) @ 0x000f6c70
Jan 5 22:59:22 kernel: ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31
AWRD 0x00000000) @ 0x07ef3000
Jan 5 22:59:22 kernel: ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31
AWRD 0x00000000) @ 0x07ef3040
Jan 5 22:59:22 kernel: ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000
MSFT 0x0100000c) @ 0x00000000
Jan 5 22:59:22 kernel: ACPI: PM-Timer IO Port: 0x4008
Jan 5 22:59:22 kernel: Allocating PCI resources starting at 10000000
(gap: 07f00000:f7c00000)
Jan 5 22:59:22 kernel: Built 1 zonelists
Jan 5 22:59:22 kernel: Kernel command line: video=vesa:ywrap,mtrr
vga=788 initrd=/install.386/gtk/initrd.gz --
BOOT_IMAGE=/install.386/vmlinuz
Jan 5 22:59:22 kernel: Local APIC disabled by BIOS -- you can enable
it with "lapic"
Jan 5 22:59:22 kernel: mapped APIC to ffffd000 (01101000)
Jan 5 22:59:22 kernel: Enabling fast FPU save and restore... done.
Jan 5 22:59:22 kernel: Enabling unmasked SIMD FPU exception support... done.
Jan 5 22:59:22 kernel: Initializing CPU#0
Jan 5 22:59:22 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Jan 5 22:59:22 kernel: Detected 551.321 MHz processor.
Jan 5 22:59:22 kernel: Using pmtmr for high-res timesource
Jan 5 22:59:22 kernel: Console: colour VGA+ 80x25
Jan 5 22:59:22 kernel: Dentry cache hash table entries: 16384 (order:
4, 65536 bytes)
Jan 5 22:59:22 kernel: Inode-cache hash table entries: 8192 (order:
3, 32768 bytes)
Jan 5 22:59:22 kernel: Memory: 116064k/129984k available (1456k
kernel code, 13376k reserved, 566k data, 252k init, 0k highmem)
Jan 5 22:59:22 kernel: Checking if this processor honours the WP bit
even in supervisor mode... Ok.
Jan 5 22:59:22 kernel: Calibrating delay using timer specific
routine.. 1103.75 BogoMIPS (lpj=2207504)
Jan 5 22:59:22 kernel: Security Framework v1.0.0 initialized
Jan 5 22:59:22 kernel: SELinux: Disabled at boot.
Jan 5 22:59:22 kernel: Capability LSM initialized
Jan 5 22:59:22 kernel: Mount-cache hash table entries: 512
Jan 5 22:59:22 kernel: CPU: After generic identify, caps: 0387f9ff
00000000 00000000 00000000 00000000 00000000 00000000
Jan 5 22:59:22 kernel: CPU: After vendor identify, caps: 0387f9ff
00000000 00000000 00000000 00000000 00000000 00000000
Jan 5 22:59:22 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jan 5 22:59:22 kernel: CPU: L2 cache: 512K
Jan 5 22:59:22 kernel: CPU serial number disabled.
Jan 5 22:59:22 kernel: CPU: After all inits, caps: 0383f9ff 00000000
00000000 00000040 00000000 00000000 00000000
Jan 5 22:59:22 kernel: CPU: Intel Pentium III (Katmai) stepping 03
Jan 5 22:59:22 kernel: Checking 'hlt' instruction... OK.
Jan 5 22:59:22 kernel: SMP alternatives: switching to UP code
Jan 5 22:59:22 kernel: Freeing SMP alternatives: 0k freed
Jan 5 22:59:22 kernel: ACPI: setting ELCR to 0200 (from 0e20)
Jan 5 22:59:22 kernel: checking if image is initramfs... it is
Jan 5 22:59:22 kernel: Freeing initrd memory: 9719k freed
Jan 5 22:59:22 kernel: NET: Registered protocol family 16
Jan 5 22:59:22 kernel: EISA bus registered
Jan 5 22:59:22 kernel: ACPI: bus type pci registered
Jan 5 22:59:22 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1
Jan 5 22:59:22 kernel: Setting up standard PCI resources
Jan 5 22:59:22 kernel: ACPI: Subsystem revision 20060127
Jan 5 22:59:22 kernel: ACPI: Interpreter enabled
Jan 5 22:59:22 kernel: ACPI: Using PIC for interrupt routing
Jan 5 22:59:22 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 5 22:59:22 kernel: PCI: Probing PCI hardware (bus 00)
Jan 5 22:59:22 kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Jan 5 22:59:22 kernel: Boot video device is 0000:00:01.0
Jan 5 22:59:22 kernel: PCI quirk: region 4000-407f claimed by ICH4
ACPI/GPIO/TCO
Jan 5 22:59:22 kernel: PCI quirk: region 4080-40bf claimed by ICH4 GPIO
Jan 5 22:59:22 kernel: PCI: Transparent bridge - 0000:00:1e.0
Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6
7 *10 11 12 14 15)
Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6
7 10 11 12 14 15)
Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6
7 10 *11 12 14 15)
Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6
7 10 11 12 14 15) *9
Jan 5 22:59:22 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 5 22:59:22 kernel: pnp: PnP ACPI init
Jan 5 22:59:22 kernel: pnp: PnP ACPI: found 15 devices
Jan 5 22:59:22 kernel: PnPBIOS: Disabled by ACPI PNP
Jan 5 22:59:22 kernel: PCI: Using ACPI for IRQ routing
Jan 5 22:59:22 kernel: doesn't work, try "pci=routeirq". If it
helps, post a report
Jan 5 22:59:22 kernel: PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0
Jan 5 22:59:22 kernel: PCI: Bridge: 0000:00:1e.0
Jan 5 22:59:22 kernel: IO window: c000-cfff
Jan 5 22:59:22 kernel: MEM window: dc000000-ddffffff
Jan 5 22:59:22 kernel: PREFETCH window: 10000000-100fffff
Jan 5 22:59:22 kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jan 5 22:59:22 kernel: NET: Registered protocol family 2
Jan 5 22:59:22 kernel: IP route cache hash table entries: 1024
(order: 0, 4096 bytes)
Jan 5 22:59:22 kernel: TCP established hash table entries: 4096
(order: 2, 16384 bytes)
Jan 5 22:59:22 kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Jan 5 22:59:22 kernel: TCP: Hash tables configured (established 4096 bind 2048)
Jan 5 22:59:22 kernel: TCP reno registered
Jan 5 22:59:22 kernel: audit: initializing netlink socket (disabled)
Jan 5 22:59:22 kernel: audit(1168037956.024:1): initialized
Jan 5 22:59:22 kernel: VFS: Disk quotas dquot_6.5.1
Jan 5 22:59:22 kernel: Dquot-cache hash table entries: 1024 (order 0,
4096 bytes)
Jan 5 22:59:22 kernel: Initializing Cryptographic API
Jan 5 22:59:22 kernel: io scheduler noop registered
Jan 5 22:59:22 kernel: io scheduler anticipatory registered (default)
Jan 5 22:59:22 kernel: io scheduler deadline registered
Jan 5 22:59:22 kernel: io scheduler cfq registered
Jan 5 22:59:22 kernel: isapnp: Scanning for PnP cards...
Jan 5 22:59:22 kernel: isapnp: No Plug & Play device found
Jan 5 22:59:22 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4
ports, IRQ sharing enabled
Jan 5 22:59:22 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 5 22:59:22 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 5 22:59:22 kernel: RAMDISK driver initialized: 16 RAM disks of
8192K size 1024 blocksize
Jan 5 22:59:22 kernel: PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jan 5 22:59:22 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 5 22:59:22 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 5 22:59:22 kernel: EISA: Probing bus 0 at eisa.0
Jan 5 22:59:22 kernel: Cannot allocate resource for EISA slot 4
Jan 5 22:59:22 kernel: EISA: Detected 0 cards.
Jan 5 22:59:22 kernel: TCP bic registered
Jan 5 22:59:22 kernel: NET: Registered protocol family 1
Jan 5 22:59:22 kernel: NET: Registered protocol family 17
Jan 5 22:59:22 kernel: NET: Registered protocol family 8
Jan 5 22:59:22 kernel: NET: Registered protocol family 20
Jan 5 22:59:22 kernel: Using IPI Shortcut mode
Jan 5 22:59:22 kernel: ACPI wakeup devices:
Jan 5 22:59:22 kernel: SLPB PCI0 USB0 UAR1 UAR2
Jan 5 22:59:22 kernel: ACPI: (supports S0 S1 S4 S5)
Jan 5 22:59:22 kernel: Freeing unused kernel memory: 252k freed
Jan 5 22:59:22 kernel: input: AT Translated Set 2 keyboard as
/class/input/input0
Jan 5 22:59:22 kernel: usbcore: registered new driver usbfs
Jan 5 22:59:22 kernel: usbcore: registered new driver hub
Jan 5 22:59:22 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 5 22:59:22 kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Jan 5 22:59:22 kernel: parport: PnPBIOS parport detected.
Jan 5 22:59:22 kernel: parport0: PC-style at 0x378 (0x778), irq 7,
dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Jan 5 22:59:22 kernel: USB Universal Host Controller Interface driver v3.0
Jan 5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Jan 5 22:59:22 kernel: PCI: setting IRQ 11 as level-triggered
Jan 5 22:59:22 kernel: ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link
[LNKD] -> GSI 11 (level, low) -> IRQ 11
Jan 5 22:59:22 kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jan 5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: UHCI Host Controller
Jan 5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: new USB bus registered,
assigned bus number 1
Jan 5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
Jan 5 22:59:22 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 5 22:59:22 kernel: hub 1-0:1.0: USB hub found
Jan 5 22:59:22 kernel: hub 1-0:1.0: 2 ports detected
Jan 5 22:59:22 kernel: ICH: IDE controller at PCI slot 0000:00:1f.1
Jan 5 22:59:22 kernel: ICH: chipset revision 2
Jan 5 22:59:22 kernel: ICH: not 100% native mode: will probe irqs later
Jan 5 22:59:22 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:pio
Jan 5 22:59:22 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:DMA
Jan 5 22:59:22 kernel: Probing IDE interface ide0...
Jan 5 22:59:22 kernel: input: ImPS/2 Logitech Wheel Mouse as
/class/input/input1
Jan 5 22:59:22 kernel: hda: SAMSUNG SV0802N, ATA DISK drive
Jan 5 22:59:22 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 5 22:59:22 kernel: Probing IDE interface ide1...
Jan 5 22:59:22 kernel: hdc: TSSTcorp CDW/DVD SH-M522C, ATAPI CD/DVD-ROM drive
Jan 5 22:59:22 kernel: hdd: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI
CD/DVD-ROM drive
Jan 5 22:59:22 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan 5 22:59:22 kernel: hda: max request size: 512KiB
Jan 5 22:59:22 kernel: hda: 156368016 sectors (80060 MB) w/2048KiB
Cache, CHS=16383/255/63, UDMA(33)
Jan 5 22:59:22 kernel: hda: cache flushes supported
Jan 5 22:59:22 kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7
hda8 hda9 hda10 >
Jan 5 22:59:22 kernel: hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 1536kB
Cache, UDMA(33)
Jan 5 22:59:22 kernel: Uniform CD-ROM driver Revision: 3.20
Jan 5 22:59:22 kernel: hdd: ATAPI 1X CD-ROM CD-R/RW drive, 2048kB
Cache, UDMA(33)
Jan 5 22:59:22 kernel: ACPI: Fan [FAN] (on)
Jan 5 22:59:22 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
Jan 5 22:59:22 kernel: ACPI: Processor [CPU0] (supports 2 throttling states)
Jan 5 22:59:22 kernel: ACPI: Thermal Zone [THRM] (38 C)
Jan 5 22:59:24 kernel: usbcore: registered new driver usbkbd
Jan 5 22:59:24 kernel: drivers/usb/input/usbkbd.c: :USB HID Boot
Protocol keyboard driver
Jan 5 22:59:24 kernel: usbcore: registered new driver hiddev
Jan 5 22:59:24 kernel: usbcore: registered new driver usbhid
Jan 5 22:59:24 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan 5 22:59:24 kernel: usbcore: registered new driver usbserial
Jan 5 22:59:24 kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for generic
Jan 5 22:59:24 kernel: usbcore: registered new driver usbserial_generic
Jan 5 22:59:24 kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan 5 22:59:25 kernel: vga16fb: initializing
Jan 5 22:59:25 kernel: vga16fb: mapped to 0xb00a0000
Jan 5 22:59:25 kernel: Console: switching to colour frame buffer device 80x30
Jan 5 22:59:25 kernel: fb0: VGA16 VGA frame buffer device
Jan 5 22:59:25 init: Starting pid 2097, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:25 init: Starting pid 2105, console /dev/vc/4: '/usr/bin/tail'
Jan 5 22:59:27 init: Process '/sbin/debian-installer' (pid 2097)
exited. Scheduling it for restart.
Jan 5 22:59:27 init: Starting pid 2173, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:28 init: Process '/sbin/debian-installer' (pid 2173)
exited. Scheduling it for restart.
Jan 5 22:59:28 init: Starting pid 2235, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:30 init: Process '/sbin/debian-installer' (pid 2235)
exited. Scheduling it for restart.
Jan 5 22:59:30 init: Starting pid 2297, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:32 init: Process '/sbin/debian-installer' (pid 2297)
exited. Scheduling it for restart.
Jan 5 22:59:32 init: Starting pid 2359, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:33 init: Process '/sbin/debian-installer' (pid 2359)
exited. Scheduling it for restart.
Jan 5 22:59:33 init: Starting pid 2421, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:35 init: Process '/sbin/debian-installer' (pid 2421)
exited. Scheduling it for restart.
Jan 5 22:59:35 init: Starting pid 2483, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:37 init: Process '/sbin/debian-installer' (pid 2483)
exited. Scheduling it for restart.
Jan 5 22:59:37 init: Starting pid 2545, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 22:59:38 init: Process '/sbin/debian-installer' (pid 2545)
exited. Scheduling it for restart.
Jan 5 22:59:38 init: Starting pid 2607, console /dev/vc/1:
'/sbin/debian-installer'
Jan 5 23:00:06 init: Starting pid 2108, console /dev/vc/2: '/bin/sh'
Jan 5 23:00:39 log-output: ^[[9;0]
Jan 5 23:00:39 log-output: ^[%G
Jan 5 23:00:39 log-output: (process:2682): INFO: kbd-mode: setting
console mode to Unicode (UTF-8)
Jan 5 23:00:39 log-output:
Jan 5 23:00:40 log-output: (*) DirectFB/Config: Parsing config file
'/etc/directfbrc'.
Jan 5 23:00:40 log-output:
Jan 5 23:00:40 log-output: ---------------------- DirectFB
v0.9.25 ---------------------
Jan 5 23:00:40 log-output: (c) 2000-2002 convergence
integrated media GmbH
Jan 5 23:00:40 log-output: (c) 2002-2004 convergence
GmbH
Jan 5 23:00:40 log-output:
-----------------------------------------------------------
Jan 5 23:00:40 log-output:
Jan 5 23:00:40 log-output: (*) DirectFB/Core: Single Application
Core. (2006-10-17 10:15)
Jan 5 23:00:40 log-output: (*) Direct/Memcpy: Using linux kernel memcpy()
Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'VT Switcher'
(CRITICAL, 2719)...
Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'Keyboard
Input' (INPUT, 2720)...
Jan 5 23:00:40 log-output: (!!!) *** UNIMPLEMENTED
[fusion_reactor_set_lock] *** [../../../lib/fusion/reactor.c:853]
Jan 5 23:00:40 log-output: (*) DirectFB/Input: Keyboard 0.9
(convergence integrated media GmbH)
Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'Linux Input'
(INPUT, 2721)...
Jan 5 23:00:40 log-output: (*) DirectFB/Input: AT Translated Set 2
keyboard (1) 0.1 (convergence integrated media GmbH)
Jan 5 23:00:40 log-output: (*) Direct/Thread: Running 'Linux Input'
(INPUT, 2722)...
Jan 5 23:00:40 log-output: (*) DirectFB/Input: ImPS/2 Logitech Wheel
Mouse (2) 0.1 (convergence integrated media GmbH)
Jan 5 23:00:40 log-output: (*) DirectFB/Graphics: Generic Software
Rasterizer 0.6 (convergence integrated media GmbH)
Jan 5 23:00:40 log-output: (!) DirectFB/FBDev: No supported modes
found in /etc/fb.modes and current mode not supported!
Jan 5 23:00:40 log-output: (!) DirectFB/FBDev: Current mode's
pixelformat: rgba 6/0, 6/0, 6/0, 0/0 (4bit)
Jan 5 23:00:40 log-output: (!) DirectFB/Core/layers: Failed to
initialize layer 0!
Jan 5 23:00:40 log-output: --> Initialization error!
Jan 5 23:00:40 log-output: (!) DirectFB/Core: Could not initialize
'layers' core!
Jan 5 23:00:40 log-output: --> Initialization error!
Jan 5 23:00:40 log-output: (#) DirectFBError [gdk_display_open:
DirectFBCreate]: Initialization error!
Jan 5 23:00:40 log-output:
Jan 5 23:00:40 log-output: (debconf:2715): Gtk-WARNING **: cannot
open display:
---------------------------------syslog
end-----------------------------------------
Further information :
The kernel symbols (/proc/kallsyms) showed no signs of any i810fb and
no modules of that name
could be seen (in /lib/modules/.../).
There is no fb.modes in /etc/
I think the kernel module for i810fb was not included with the CD image.
The text mode install seems to go well.
Reply to: