--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: installation OK, reporting anyway as suggested
- From: Vasiliy Faronov <qvvx@yandex.ru>
- Date: Sun, 19 Nov 2006 20:32:39 +0300
- Message-id: <20061119173239.4021.92240.reportbug@qimm>
Package: installation-reports
Version: 2.23
Severity: wishlist
-- Package-specific info:
Boot method: netinst CD
Image version: etch netinst CD, d-i RC1
Date: Sun Nov 19, 2006; about 18:30
Machine: a generic non-branded x86 machine
Partitions:
$ df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda1 ext3 7558368 691408 6483012 10% /
udev tmpfs 10240 64 10176 1% /dev
devshm tmpfs 258484 0 258484 0% /dev/shm
/dev/hda7 ext3 18303120 176232 17197128 2% /home
/dev/hda5 vfat 2709632 896824 1812808 34% /interop
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
* The mouse cursor behaves incorrectly: when it is over a text, it
changes to the text cursor; but then fails to switch back to the normal
arrow cursor when over other widgets such as buttons.
* The archive mirror and HTTP proxy information is requested twice:
during the step "Choose a mirror of the Debian archive" and later during
the step "Configure the package manager".
* The user feedback while configuring the package manager is
insufficient. Once I specify the mirror, the installer seems to be
downloading the package lists etc. from the mirror, but it remains
silent about the progress. Combined with the fact that there is little
hard disk activity during this process, this may lead a user to believe
that the installer has simply frozen. This seeming "freeze" may sustain
for quite some time; for example, with my Internet connection, the time
needed to download the package lists is about 5 minutes or so.
* When installing/configuring tasks, the uppermost title (right below
the logo) is out of sync with the real progress of the installation. I.
e. when we are already configuring package ZZZZ, (and the line below the
progress bar says so), the upper title still states that we are
configuring package XXXX.
* I was not offered to configure exim4, even though I ran at
priority=medium. I don't know if this is a problem, but in sarge exim4
configuration was a part of the install process even when running with
default priority.
* During the installation of the Standard system task, while configuring
ispell, I was first offered a British dictionary only; then also an
American one. I think this is because the two packages are installed
sequentially, but perhaps it is possible to delay the configuration of
ispell until both have been installed.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061102)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux qimm 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 04)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge [8086:1131] (rev 04)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 11)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 11)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 [8086:244b] (rev 11)
lspci -nn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #1) [8086:2442] (rev 11)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus [8086:2443] (rev 11)
lspci -nn: 00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #2) [8086:2444] (rev 11)
lspci -nn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio [8086:2445] (rev 11)
lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV15 [GeForce2 GTS/Pro] [10de:0150] (rev a4)
lspci -nn: 02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 04)
lspci -vnn: Subsystem: ABIT Computer Corp. Unknown device [147b:0407]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Memory at d8000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Capabilities: [88] Vendor Specific Information
lspci -vnn: Capabilities: [a0] AGP version 2.0
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge [8086:1131] (rev 04)
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 32
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: Memory behind bridge: dc000000-ddffffff
lspci -vnn: Prefetchable memory behind bridge: d0000000-d7ffffff
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 11)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
lspci -vnn: I/O behind bridge: 0000c000-0000cfff
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 11)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 [8086:244b] (rev 11) (prog-if 80 [Master])
lspci -vnn: Subsystem: ABIT Computer Corp. Unknown device [147b:0407]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: I/O ports at f000 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #1) [8086:2442] (rev 11)
lspci -vnn: Subsystem: ABIT Computer Corp. Unknown device [147b:0407]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -vnn: I/O ports at d000 [size=32]
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus [8086:2443] (rev 11)
lspci -vnn: Subsystem: ABIT Computer Corp. Unknown device [147b:0407]
lspci -vnn: Flags: medium devsel
lspci -vnn: I/O ports at 5000 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #2) [8086:2444] (rev 11)
lspci -vnn: Subsystem: ABIT Computer Corp. Unknown device [147b:0407]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -vnn: I/O ports at d400 [size=32]
lspci -vnn:
lspci -vnn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio [8086:2445] (rev 11)
lspci -vnn: Subsystem: ABIT Computer Corp. Unknown device [147b:0407]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 5
lspci -vnn: I/O ports at d800 [size=256]
lspci -vnn: I/O ports at dc00 [size=64]
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV15 [GeForce2 GTS/Pro] [10de:0150] (rev a4)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12
lspci -vnn: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: Memory at d0000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: [virtual] Expansion ROM at dd000000 [disabled] [size=64K]
lspci -vnn: Capabilities: [60] Power Management version 1
lspci -vnn: Capabilities: [44] AGP version 2.0
lspci -vnn:
lspci -vnn: 02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
lspci -vnn: Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
lspci -vnn: Flags: medium devsel, IRQ 11
lspci -vnn: I/O ports at c000 [size=32]
lspci -vnn:
lsmod: Module Size Used by
lsmod: sd_mod 18448 0
lsmod: qnx4 10484 0
lsmod: ntfs 184468 0
lsmod: nls_cp437 5888 1
lsmod: xfs 481140 0
lsmod: reiserfs 210176 0
lsmod: jfs 156124 0
lsmod: ext3 115336 2
lsmod: jbd 45460 1 ext3
lsmod: vfat 11520 1
lsmod: fat 45852 1 vfat
lsmod: ne2k_pci 10336 0
lsmod: 8390 8576 1 ne2k_pci
lsmod: nls_iso8859_1 4224 1
lsmod: isofs 31672 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: floppy 52868 0
lsmod: usb_storage 69952 0
lsmod: scsi_mod 120840 2 sd_mod,usb_storage
lsmod: vga16fb 11400 0
lsmod: vgastate 7808 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbkbd 6656 0
lsmod: thermal 12680 0
lsmod: processor 21440 1 thermal
lsmod: fan 4484 0
lsmod: ide_cd 35104 0
lsmod: cdrom 32288 1 ide_cd
lsmod: ide_disk 14976 5
lsmod: generic 4356 0 [permanent]
lsmod: usbhid 35040 0
lsmod: usbmouse 5376 0
lsmod: piix 9220 0 [permanent]
lsmod: ide_core 107940 6 ide_generic,usb_storage,ide_cd,ide_disk,generic,piix
lsmod: evdev 8960 2
lsmod: uhci_hcd 19464 0
lsmod: parport_pc 31524 0
lsmod: usbcore 108544 7 usb_storage,usbserial,usbkbd,usbhid,usbmouse,uhci_hcd
lsmod: parport 31944 1 parport_pc
lsmod: psmouse 34184 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 258532 428 258104 0% /dev
df: tmpfs 258532 428 258104 0% /dev
df: tmpfs 258532 428 258104 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 7558368 682416 6492004 10% /target
df: /dev/ide/host0/bus0/target0/lun0/part7 18303120 176216 17197144 1% /target/home
df: /dev/ide/host0/bus0/target0/lun0/part5 2709632 896824 1812808 33% /target/interop
free: total used free shared buffers
free: Mem: 517064 431200 85864 0 17476
free: Swap: 497972 424 497548
free: Total: 1015036 431624 583412
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 8
/proc/cpuinfo: model name : Celeron (Coppermine)
/proc/cpuinfo: stepping : 10
/proc/cpuinfo: cpu MHz : 913.872
/proc/cpuinfo: cache size : 128 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse up
/proc/cpuinfo: bogomips : 1829.31
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 4000-407f : 0000:00:1f.0
/proc/ioports: 4000-4003 : PM1a_EVT_BLK
/proc/ioports: 4004-4005 : PM1a_CNT_BLK
/proc/ioports: 4008-400b : PM_TMR
/proc/ioports: 4010-4015 : ACPI CPU throttle
/proc/ioports: 4028-402b : GPE1_BLK
/proc/ioports: 402c-402f : GPE0_BLK
/proc/ioports: 4080-40bf : 0000:00:1f.0
/proc/ioports: 5000-500f : 0000:00:1f.3
/proc/ioports: c000-cfff : PCI Bus #02
/proc/ioports: c000-c01f : 0000:02:03.0
/proc/ioports: c000-c01f : ne2k-pci
/proc/ioports: d000-d01f : 0000:00:1f.2
/proc/ioports: d000-d01f : uhci_hcd
/proc/ioports: d400-d41f : 0000:00:1f.4
/proc/ioports: d400-d41f : uhci_hcd
/proc/ioports: d800-d8ff : 0000:00:1f.5
/proc/ioports: dc00-dc3f : 0000:00:1f.5
/proc/ioports: f000-f00f : 0000:00:1f.1
/proc/ioports: f000-f007 : ide0
/proc/ioports: f008-f00f : ide1
/proc/iomem: 00000000-0009ffff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cb7ff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1ffeffff : System RAM
/proc/iomem: 00100000-0026c0f2 : Kernel code
/proc/iomem: 0026c0f3-002f9cef : Kernel data
/proc/iomem: 1fff0000-1fff2fff : ACPI Non-volatile Storage
/proc/iomem: 1fff3000-1fffffff : ACPI Tables
/proc/iomem: d0000000-d7ffffff : PCI Bus #01
/proc/iomem: d0000000-d7ffffff : 0000:01:00.0
/proc/iomem: d0000000-d3ffffff : vesafb
/proc/iomem: d8000000-dbffffff : 0000:00:00.0
/proc/iomem: dc000000-ddffffff : PCI Bus #01
/proc/iomem: dc000000-dcffffff : 0000:01:00.0
/proc/iomem: dd000000-dd00ffff : 0000:01:00.0
/proc/iomem: ffb00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1125885 XT-PIC timer
/proc/interrupts: 1: 462 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 7: 0 XT-PIC parport0
/proc/interrupts: 9: 0 XT-PIC acpi
/proc/interrupts: 11: 147150 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, eth0
/proc/interrupts: 14: 35439 XT-PIC ide0
/proc/interrupts: 15: 1640 XT-PIC ide1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 517064 kB
/proc/meminfo: MemFree: 85848 kB
/proc/meminfo: Buffers: 17476 kB
/proc/meminfo: Cached: 265060 kB
/proc/meminfo: SwapCached: 96 kB
/proc/meminfo: Active: 264460 kB
/proc/meminfo: Inactive: 134092 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 517064 kB
/proc/meminfo: LowFree: 85848 kB
/proc/meminfo: SwapTotal: 497972 kB
/proc/meminfo: SwapFree: 497548 kB
/proc/meminfo: Dirty: 2264 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 122696 kB
/proc/meminfo: Slab: 26752 kB
/proc/meminfo: CommitLimit: 756504 kB
/proc/meminfo: Committed_AS: 165200 kB
/proc/meminfo: PageTables: 348 kB
/proc/meminfo: VmallocTotal: 777936 kB
/proc/meminfo: VmallocUsed: 6976 kB
/proc/meminfo: VmallocChunk: 770212 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=0458 Product=001b Version=0000
/proc/bus/input/devices: N: Name="KYE NetScroll+ EYE"
/proc/bus/input/devices: P: Phys=usb-0000:00:1f.2-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=event1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=1f0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.2 present.
dmidecode: 38 structures occupying 1032 bytes.
dmidecode: Table at 0x000F0800.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 19 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Award Software International, Inc.
dmidecode: Version: 6.00 PG
dmidecode: Release Date: 04/18/2001
dmidecode: Address: 0xE0000
dmidecode: Runtime Size: 128 kB
dmidecode: ROM Size: 256 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: ABIT
dmidecode: Product Name: 6A69RA1R
dmidecode: Version: BIOS Rev:0.1
dmidecode: Serial Number: ST6R0.1
dmidecode: UUID: Not Present
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: ABIT
dmidecode: Product Name: i815EP-W83627HF
dmidecode: Version: Rev:0.1
dmidecode: Serial Number: ST6R0.1
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer:
dmidecode: Type: Desktop
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket 370
dmidecode: Type: Central Processor
dmidecode: Family: Celeron
dmidecode: Manufacturer: Intel
dmidecode: ID: 8A 06 00 00 FF F9 83 03
dmidecode: Signature: Type 0, Family 6, Model 8, Stepping 10
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: Version: Intel Celeron(TM)
dmidecode: Voltage: 0.1 V
dmidecode: External Clock: 100 MHz
dmidecode: Max Speed: 1000 MHz
dmidecode: Current Speed: 900 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0009
dmidecode: L2 Cache Handle: 0x000A
dmidecode: L3 Cache Handle: No L3 Cache
dmidecode:
dmidecode: Handle 0x0005, DMI type 5, 22 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 8-bit Parity
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 128 MB
dmidecode: Maximum Total Memory Size: 384 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: Supported Memory Types:
dmidecode: DIMM
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 3
dmidecode: 0x0006
dmidecode: 0x0007
dmidecode: 0x0008
dmidecode: Enabled Error Correcting Capabilities: None
dmidecode:
dmidecode: Handle 0x0006, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A0
dmidecode: Bank Connections: 1
dmidecode: Current Speed: 8 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 256 MB (Single-bank Connection)
dmidecode: Enabled Size: 256 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A1
dmidecode: Bank Connections: 2
dmidecode: Current Speed: 8 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 256 MB (Single-bank Connection)
dmidecode: Enabled Size: 256 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A2
dmidecode: Bank Connections: 3
dmidecode: Current Speed: 127 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000A, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: External Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: External
dmidecode: Installed Size: 128 KB
dmidecode: Maximum Size: 256 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRIMARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator:
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SECONDARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator:
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FDD
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator:
dmidecode: External Connector Type: None
dmidecode: Port Type: 8251 FIFO Compatible
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM1
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550 Compatible
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM2
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550 Compatible
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LPT1
dmidecode: Internal Connector Type: DB-25 female
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Keyboard
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator:
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS/2 Mouse
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator: No Detected
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0013, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0014, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0015, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0016, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0017, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0018, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0019, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: AGP
dmidecode: Type: 32-bit AGP
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 8
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator:
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001B, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 3
dmidecode: n|US|iso8859-1
dmidecode: n|US|iso8859-1
dmidecode: r|CA|iso8859-1
dmidecode: Currently Installed Language: n|US|iso8859-1
dmidecode:
dmidecode: Handle 0x001C, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: Flash Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 512 MB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 3
dmidecode:
dmidecode: Handle 0x001D, DMI type 17, 21 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x001C
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A0
dmidecode: Bank Locator: Bank0/1
dmidecode: Type: Unknown
dmidecode: Type Detail: None
dmidecode:
dmidecode: Handle 0x001E, DMI type 17, 21 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x001C
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A1
dmidecode: Bank Locator: Bank2/3
dmidecode: Type: Unknown
dmidecode: Type Detail: None
dmidecode:
dmidecode: Handle 0x001F, DMI type 17, 21 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x001C
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A2
dmidecode: Bank Locator: Bank4/5
dmidecode: Type: Unknown
dmidecode: Type Detail: None
dmidecode:
dmidecode: Handle 0x0020, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000003FFFF
dmidecode: Range Size: 256 kB
dmidecode: Physical Array Handle: 0x001C
dmidecode: Partition Width: 32
dmidecode:
dmidecode: Handle 0x0021, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000003FFFF
dmidecode: Range Size: 256 kB
dmidecode: Physical Device Handle: 0x001D
dmidecode: Memory Array Mapped Address Handle: 0x0020
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0022, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000003FFFF
dmidecode: Range Size: 256 kB
dmidecode: Physical Device Handle: 0x001E
dmidecode: Memory Array Mapped Address Handle: 0x0020
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0023, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000003FFFF
dmidecode: Range Size: 256 kB
dmidecode: Physical Device Handle: 0x001F
dmidecode: Memory Array Mapped Address Handle: 0x0020
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0024, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0025, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
dfbinfo: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
dfbinfo:
dfbinfo: ---------------------- DirectFB v0.9.25 ---------------------
dfbinfo: (c) 2000-2002 convergence integrated media GmbH
dfbinfo: (c) 2002-2004 convergence GmbH
dfbinfo: -----------------------------------------------------------
dfbinfo:
dfbinfo: (*) DirectFB/Core: Single Application Core. (2006-10-17 10:15)
dfbinfo: (*) Direct/Memcpy: Using linux kernel memcpy()
dfbinfo: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 14014)...
dfbinfo: (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 14015)...
dfbinfo: (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [../../../lib/fusion/reactor.c:853]
dfbinfo: (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 14016)...
dfbinfo: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence integrated media GmbH)
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 14017)...
dfbinfo: (*) DirectFB/Input: KYE NetScroll+ EYE (2) 0.1 (convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
dfbinfo:
dfbinfo:
dfbinfo: Screen (00) FBDev Primary Screen (primary screen)
dfbinfo: Caps: VSYNC POWER_MANAGEMENT
dfbinfo:
dfbinfo: Layer (00) FBDev Primary Layer (primary layer)
dfbinfo: Type: GRAPHICS
dfbinfo: Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
dfbinfo:
dfbinfo:
dfbinfo: Input (00) Keyboard (primary keyboard)
dfbinfo: Type: KEYBOARD
dfbinfo: Caps: KEYS
dfbinfo:
dfbinfo: Input (10) AT Translated Set 2 keyboard
dfbinfo: Type: KEYBOARD
dfbinfo: Caps: KEYS
dfbinfo:
dfbinfo: Input (01) KYE NetScroll+ EYE (primary mouse)
dfbinfo: Type: MOUSE
dfbinfo: Caps: AXES BUTTONS
dfbinfo: Max. Axis: 2
dfbinfo: Max. Button: 4
dfbinfo:
==============================================
Installer status:
==============================================
Package: ttf-thai-tlwg-udeb
Status: install ok unpacked
Version: 1:0.4.4-5
Description: Thai fonts in TrueType format for D-I use
Package: input-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: input-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Input devices support
Package: acpi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-486-di
Description: ACPI support modules
Package: scsi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: mouse-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: mouse-modules
Depends: kernel-image-2.6.17-2-486-di, input-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Mouse support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.29
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: cdrom-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-modules
Depends: ide-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Esoteric CDROM drivers
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: ttf-khmeros-udeb
Status: install ok unpacked
Version: 3.10-3
Provides: ttf-installer
Description: Debian-Installer font for the Khmer language of Cambodia
Package: di-utils-shell
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: usb-serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB serial drivers
Package: ttf-dejavu-udeb
Status: install ok unpacked
Version: 2.10-1
Description: Vera font family derivate with additional characters
Package: di-utils
Status: install ok installed
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: usb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: USB support
Package: pcmcia-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: PCMCIA storage drivers
Package: scsi-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Core SCSI subsystem
Package: ttf-cjk-compact-udeb
Status: install ok unpacked
Version: 1.8
Description: Shrinked CJK TrueType fonts for GUI d-i.
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ttf-freefont-udeb
Status: install ok unpacked
Version: 20060501cvs-9
Provides: ttf-installer
Description: Freefont Sans fonts for the graphical installer
Package: ttf-dzongkha-udeb
Status: install ok unpacked
Version: 0.2-3
Provides: ttf-installer
Description: TrueType fonts for Dzongkha language
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.40
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: libgtk-directfb-2.0-0-udeb
Status: install ok unpacked
Version: 2.8.20-3
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.5), libpng12-0-udeb (>= 1.2.8rel)
Description: The GTK+ graphical user interface library - minimal runtime
Package: firmware-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Firmware request modules
Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.2
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: libpng12-0-udeb
Status: install ok unpacked
Version: 1.2.8rel-7
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: PNG library - minimal runtime library
Package: libnss-files-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for files - udeb
Package: fb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Frame buffer support
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: scsi-common-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di
Description: Very common SCSI drivers
Package: libcairo-directfb2-udeb
Status: install ok unpacked
Version: 1.2.4-4
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: The Cairo 2D vector graphics library DirectFB build
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: gtk2-engines-udeb
Status: install ok unpacked
Version: 1:2.8.1-3
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.5)
Description: theme engines for GTK+ 2.x in the Debian installer
Package: pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: Common PCMCIA drivers
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: serial-modules
Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Serial drivers
Package: ide-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: IDE support
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: rootskel-gtk
Status: install ok unpacked
Version: 1.00
Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb
Description: Additions for graphical installs to skeleton root filesystem (debian-installer)
Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: floppy-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Floppy driver
Package: libpango1.0-udeb
Status: install ok unpacked
Version: 1.14.7-1
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2), libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1)
Description: Layout and rendering of internationalized text
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: parport-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: parport-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Parallel port support
Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: firewire-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Core FireWire drivers
Package: libfreetype6-udeb
Status: install ok unpacked
Version: 2.2.1-5
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: FreeType 2 font engine for the debian-installer
Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file
Package: ttf-farsiweb-udeb
Status: install ok unpacked
Version: 0.4-4
Provides: ttf-installer
Description: Farsiweb TrueType fonts for the graphical installer
Package: floppy-retriever
Status: install ok unpacked
Version: 1.11
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: libexpat1-udeb
Status: install ok unpacked
Version: 1.95.8-3.3
Provides: libexpat1
Depends: libc6 (>= 2.3.6-6)
Description: XML parsing C library - runtime library
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector
Package: cdrom-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di
Description: CDROM support
Package: ttf-bpg-georgian-fonts-udeb
Status: install ok unpacked
Version: 0.3
Provides: ttf-installer
Description: BPG Georgian fonts for the graphical installer
Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: ttf-tamil-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.1
Provides: ttf-installer
Description: Free TrueType fonts for the Tamil language
Package: usb-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB storage support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.39
Description: Terminfo entries needed by newt/slang in debian installer
Package: libdirectfb-0.9-25-udeb
Status: install ok unpacked
Version: 0.9.25.1-4
Provides: libdirectfb-0.9-25
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
Description: direct frame buffer graphics - shared libraries
Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: fontconfig-udeb
Status: install ok unpacked
Version: 2.4.1-2
Depends: libc6 (>= 2.3.6-6), libexpat1-udeb (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1)
Description: generic font configuration library - minimal runtime
Package: cdebconf-gtk-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.7), rootskel-gtk (>= 0.05)
Description: Gtk+ frontend for Debian Configuration Management System
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.8
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: fat-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fat-modules
Depends: kernel-image-2.6.17-2-486-di
Description: FAT filesystem support
Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libglib2.0-udeb
Status: install ok unpacked
Version: 2.12.4-1
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines
Package: sata-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: sata-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Description: SATA drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: ide-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di
Description: IDE drivers
Package: libatk1.0-udeb
Status: install ok unpacked
Version: 1.12.3-1
Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0)
Description: The ATK accessibility toolkit
Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: kernel-image-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: debian-installer
Status: install ok installed
Version: cdrom-gtk-20061102
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ext3-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-12
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-7
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.3.git200608202239-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 848
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 856
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 11
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
pn pciutils <none> (no description available)
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---