Daily Images Fail to Install
Hi All
I built a local copy of the netboot installer (svn revision 50226, and
KERNELVERSION = 2.6.22-3) for arm/ixp4xx last night and I get the
following message repeated over and over:
/build/buildd/cdebconf-0.125/src/debconf.c:135 (main): Cannot
initialize debconf template database
Below is the boot log from an NSLU2 (arm/ixp4xx).
Is this a known problem?
Thanks.
Gordon
Ethernet eth0: MAC address 00:14:bf:71:02:d7
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004
Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exec 0x01d00000
have eRcOmM
copy kernel code from flash to RAM
copy ramdisk file from flash to RAM
run kernel
Using base address 0x01d00000 and length 0x0001ffe0
APEX Boot Loader 1.4.15 -- Copyright (c) 2004,2005,2006,2007 Marc Singer
APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you
are welcome to redistribute it under certain circumstances.
For details, refer to the file COPYING in the program source.
apex => mem:0x00200000+0xa78c (42892 bytes)
env => nor:0x7c000+15k (no-write)
Use the command 'help help' to get started.
# copy -s $kernelsrc $bootaddr
# copy -s fis://kernel 0x00008000
1441760 bytes transferred
# copy -s $ramdisksrc $ramdiskaddr
# copy -s fis://ramdisk 0x01000000
6291440 bytes transferred
# wait 10 Type ^C key to cancel autoboot.
Type ^C key to cancel autoboot.
# boot
ATAG_HEADER
ATAG_MEM: start 0x00000000 size 0x02000000
ATAG_CMDLINE: (55 bytes) 'console=ttyS0,115200 rtc-x1205.probe=0,0x6f
noirqdebug'
ATAG_INITRD2: start 0x01000000 size 0x00400000
ATAG_END
Booting kernel at 0x00008000...
Uncompressing Linux....................................................................................
done, booting the kernel.
Linux version 2.6.22-3-ixp4xx (Debian 2.6.22-6) (maks@debian.org) (gcc
version 4.1.3 20070831 (prerelease) (Debian 4.1.2-16)) #1 Tue Nov 13
02:17:20 UTC 2007
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f
Machine: Linksys NSLU2
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 8128
Kernel command line: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
IRQ lockup detection disabled
PID hash table entries: 128 (order: 7, 512 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 25660KB available (2360K code, 220K data, 100K init)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:01.1 on pci bus
dmabounce: registered device 0000:00:01.2 on pci bus
NET: Registered protocol family 2
Time: OSTS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4096K
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
audit(4.629:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) �(c) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
6 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 6 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
NSLU2 MAC: 00:14:bf:71:02:d7
0x00040000-0x00060000 : "SysConf"
0x00060000-0x00080000 : "Loader"
0x00080000-0x001e0000 : "Kernel"
0x001e0000-0x007e0000 : "Ramdisk"
0x007e0000-0x00800000 : "FIS directory"
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
x1205 0-006f: chip found, driver version 1.0.7
x1205 0-006f: rtc core: registered x1205 as rtc0
i2c-gpio i2c-gpio.0: using pins 7 (SDA) and 6 (SCL)
Registered led device: ready
Registered led device: status
Registered led device: disk-1
Registered led device: disk-2
NET: Registered protocol family 26
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
XScale DSP coprocessor detected.
x1205 0-006f: setting the system clock to 2007-11-24 07:03:36 (1195887816)
Freeing init memory: 100K
/build/buildd/cdebconf-0.125/src/debconf.c:135 (main): Cannot
initialize debconf template database
--
Gordon Farquharson
GnuPG Key ID: 32D6D676
Reply to: