--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: LILO Installation Fails on Machine with 4 SATA Disks
- From: Youssef Eldakar <youssef.eldakar@bibalex.org>
- Date: Mon, 09 Jul 2007 14:12:36 +0300
- Message-id: <20070709111236.8904.1460.reportbug@ia715624.archive.bibalex.org>
Package: installation-reports
Version: 2.29
Severity: normal
Installing on a machine with 4 SATA disks proceeds smoothly until it
reaches the LILO boot loader installation. The boot loader installation
screen offers the choice to install LILO on /dev/sdd or /dev/sda5, the
root partition. It seems odd that the installer offers /dev/sdd as a
choice in place of /dev/sda. Regardless, attempting to install on
/dev/sdd, /dev/sda5, or /dev/sda by typing it in the "other choice"
dialog fails with a warning in syslog: "configuring lilo-installer
failed with error code 1." Switching to a shell, I indeed see no
sbin/lilo and no etc/lilo.conf under /target. If I physcially unplug all
but the first SATA disk--which is the only disk I am actually
partitioning during the installation--the installation completes
successfully. This behavior persists with XFS as well as JFS, the two
file systems I tried installing on.
-- Package-specific info:
Boot method: network
Image version: ftp://ftp.debian.org/debian/dists/etch/main/installer-amd64/20070308/images/netboot/netboot.tar.gz
Date: <Date and time of the install>
Machine: Custom-assembled 1U box
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda5 xfs 975104 113864 861240 12% /
tmpfs tmpfs 509756 0 509756 0% /lib/init/rw
udev tmpfs 10240 76 10164 1% /dev
tmpfs tmpfs 509756 0 509756 0% /dev/shm
/dev/sda1 xfs 615254784 1056 615253728 1% /0
/dev/sda9 xfs 975104 792 974312 1% /tmp
/dev/sda7 xfs 5845408 501024 5344384 9% /usr
/dev/sda8 xfs 107366112 285232 107080880 1% /var
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [E]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux ia715624 2.6.18-4-amd64 #1 SMP Wed Feb 21 14:29:38 UTC 2007 x86_64 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub [8086:2770] (rev 02)
lspci -nn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 945G/GZ Express Integrated Graphics Controller [8086:2772] (rev 02)
lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
lspci -nn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
lspci -nn: 02:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB361 AHCI/IDE [197b:2361] (rev 02)
lspci -nn: 02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMB361 AHCI/IDE [197b:2361] (rev 02)
lspci -nn: 03:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169SC Gigabit Ethernet [10ec:8167] (rev 10)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub [8086:2770] (rev 02)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 945G/GZ Express Integrated Graphics Controller [8086:2772] (rev 02)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 5
lspci -vnn: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: I/O ports at ff00 [size=8]
lspci -vnn: Memory at d0000000 (32-bit, prefetchable) [size=256M]
lspci -vnn: Memory at fdf80000 (32-bit, non-prefetchable) [size=256K]
lspci -vnn: Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
lspci -vnn: Capabilities: [d0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 5
lspci -vnn: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [70] Express Unknown type IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [130] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -vnn: I/O behind bridge: 0000c000-0000cfff
lspci -vnn: Memory behind bridge: fdc00000-fdcfffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [180] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -vnn: I/O behind bridge: 0000e000-0000efff
lspci -vnn: Memory behind bridge: fde00000-fdefffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [180] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -vnn: I/O ports at fe00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at fd00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: I/O ports at fc00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at fb00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -vnn: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
lspci -vnn: I/O behind bridge: 0000d000-0000dfff
lspci -vnn: Memory behind bridge: fdb00000-fdbfffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
lspci -vnn: Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge [8086:244e]
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
lspci -vnn: Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 225
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at fa00 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 217
lspci -vnn: I/O ports at f900 [size=8]
lspci -vnn: I/O ports at f800 [size=4]
lspci -vnn: I/O ports at f700 [size=8]
lspci -vnn: I/O ports at f600 [size=4]
lspci -vnn: I/O ports at f500 [size=16]
lspci -vnn: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: medium devsel, IRQ 15
lspci -vnn: I/O ports at 0500 [size=32]
lspci -vnn:
lspci -vnn: 02:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB361 AHCI/IDE [197b:2361] (rev 02) (prog-if 01 [PriO])
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 177
lspci -vnn: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K]
lspci -vnn: [virtual] Expansion ROM at fdd00000 [disabled] [size=64K]
lspci -vnn: Capabilities: [68] Power Management version 2
lspci -vnn: Capabilities: [50] Express Legacy Endpoint IRQ 1
lspci -vnn:
lspci -vnn: 02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMB361 AHCI/IDE [197b:2361] (rev 02) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at ef00 [size=8]
lspci -vnn: I/O ports at ee00 [size=4]
lspci -vnn: I/O ports at ed00 [size=8]
lspci -vnn: I/O ports at ec00 [size=4]
lspci -vnn: I/O ports at eb00 [size=16]
lspci -vnn: Capabilities: [68] Power Management version 2
lspci -vnn:
lspci -vnn: 03:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169SC Gigabit Ethernet [10ec:8167] (rev 10)
lspci -vnn: Subsystem: Foxconn International, Inc. Unknown device [105b:0c7c]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 209
lspci -vnn: I/O ports at de00 [size=256]
lspci -vnn: Memory at fdbff000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: [virtual] Expansion ROM at fda00000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
modulemap: 8086:27c8 uhci_hcd
modulemap: 8086:27c9 uhci_hcd
modulemap: 8086:27ca uhci_hcd
modulemap: 8086:27cb uhci_hcd
modulemap: 8086:27cc ehci_hcd
modulemap: 8086:27df piix
modulemap: 8086:27c0 ata_piix
modulemap: 197b:2361 ahci
modulemap: 197b:2361 generic
modulemap: 10ec:8167 r8169
lsmod: Module Size Used by
lsmod: qnx4 16840 0
lsmod: ntfs 190728 0
lsmod: xfs 485192 5
lsmod: reiserfs 231168 0
lsmod: jfs 166992 0
lsmod: ext3 138512 0
lsmod: jbd 65392 1 ext3
lsmod: mbcache 14216 1 ext3
lsmod: vfat 17792 0
lsmod: fat 55984 1 vfat
lsmod: isofs 40036 0
lsmod: ide_cd 45088 0
lsmod: cdrom 40488 1 ide_cd
lsmod: ide_disk 20608 0
lsmod: ide_generic 5760 0 [permanent]
lsmod: aec62xx 12544 0 [permanent]
lsmod: alim15x3 16536 0 [permanent]
lsmod: amd74xx 19504 0 [permanent]
lsmod: atiixp 11280 0 [permanent]
lsmod: cmd64x 15564 0 [permanent]
lsmod: cs5520 9600 0 [permanent]
lsmod: cs5530 10240 0 [permanent]
lsmod: cy82c693 9352 0 [permanent]
lsmod: hpt34x 10112 0 [permanent]
lsmod: it821x 13316 0 [permanent]
lsmod: ns87415 9160 0 [permanent]
lsmod: opti621 9476 0 [permanent]
lsmod: pdc202xx_new 13568 0 [permanent]
lsmod: pdc202xx_old 15104 0 [permanent]
lsmod: rz1000 7552 0 [permanent]
lsmod: sc1200 11776 0 [permanent]
lsmod: serverworks 13712 0 [permanent]
lsmod: siimage 16896 0 [permanent]
lsmod: sis5513 18448 0 [permanent]
lsmod: slc90e66 10368 0 [permanent]
lsmod: triflex 8832 0 [permanent]
lsmod: trm290 9092 0 [permanent]
lsmod: via82cxxx 13444 0 [permanent]
lsmod: usb_storage 87616 0
lsmod: sd_mod 25600 7
lsmod: jmicron 9344 0 [permanent]
lsmod: piix 15492 0 [permanent]
lsmod: parport_pc 41640 0
lsmod: parport 44684 1 parport_pc
lsmod: ata_piix 19976 6
lsmod: generic 11396 0 [permanent]
lsmod: ide_core 147584 30 ide_cd,ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,jmicron,piix,generic
lsmod: ahci 24708 0
lsmod: libata 106784 2 ata_piix,ahci
lsmod: scsi_mod 151984 4 usb_storage,sd_mod,ahci,libata
lsmod: vga16fb 16280 2
lsmod: vgastate 12416 1 vga16fb
lsmod: usbserial 38640 0
lsmod: usbkbd 11776 0
lsmod: thermal 19984 0
lsmod: processor 37608 1 thermal
lsmod: fan 9608 0
lsmod: floppy 66728 0
lsmod: r8169 36488 0
lsmod: ehci_hcd 35720 0
lsmod: uhci_hcd 28312 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 509756 420 509336 0% /dev
df: tmpfs 509756 420 509336 0% /dev
df: tmpfs 509756 420 509336 0% /.dev
df: /dev/scsi/host2/bus0/target0/lun0/part5 975104 113880 861224 12% /target
df: /dev/scsi/host2/bus0/target0/lun0/part1 615254784 1056 615253728 0% /target/0
df: /dev/scsi/host2/bus0/target0/lun0/part9 975104 292 974812 0% /target/tmp
df: /dev/scsi/host2/bus0/target0/lun0/part7 5845408 501024 5344384 9% /target/usr
df: /dev/scsi/host2/bus0/target0/lun0/part8 107366112 272116 107093996 0% /target/var
free: total used free shared buffers
free: Mem: 1019516 969440 50076 0 212
free: Swap: 1951856 0 1951856
free: Total: 2971372 969440 2001932
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 15
/proc/cpuinfo: model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 1795.536
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl est tm2 cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 3594.03
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 15
/proc/cpuinfo: model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 1795.536
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 1
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl est tm2 cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 3591.23
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK
/proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK
/proc/ioports: 0408-040b : ACPI PM_TMR
/proc/ioports: 0428-042f : ACPI GPE0_BLK
/proc/ioports: 0500-051f : 0000:00:1f.3
/proc/ioports: c000-cfff : PCI Bus #01
/proc/ioports: d000-dfff : PCI Bus #03
/proc/ioports: de00-deff : 0000:03:03.0
/proc/ioports: de00-deff : r8169
/proc/ioports: e000-efff : PCI Bus #02
/proc/ioports: eb00-eb0f : 0000:02:00.1
/proc/ioports: eb00-eb07 : ide2
/proc/ioports: eb08-eb0f : ide3
/proc/ioports: ec00-ec03 : 0000:02:00.1
/proc/ioports: ed00-ed07 : 0000:02:00.1
/proc/ioports: ee00-ee03 : 0000:02:00.1
/proc/ioports: ef00-ef07 : 0000:02:00.1
/proc/ioports: f500-f50f : 0000:00:1f.2
/proc/ioports: f500-f50f : libata
/proc/ioports: f600-f603 : 0000:00:1f.2
/proc/ioports: f600-f603 : libata
/proc/ioports: f700-f707 : 0000:00:1f.2
/proc/ioports: f700-f707 : libata
/proc/ioports: f800-f803 : 0000:00:1f.2
/proc/ioports: f800-f803 : libata
/proc/ioports: f900-f907 : 0000:00:1f.2
/proc/ioports: f900-f907 : libata
/proc/ioports: fa00-fa0f : 0000:00:1f.1
/proc/ioports: fa00-fa07 : ide0
/proc/ioports: fa08-fa0f : ide1
/proc/ioports: fb00-fb1f : 0000:00:1d.3
/proc/ioports: fb00-fb1f : uhci_hcd
/proc/ioports: fc00-fc1f : 0000:00:1d.2
/proc/ioports: fc00-fc1f : uhci_hcd
/proc/ioports: fd00-fd1f : 0000:00:1d.1
/proc/ioports: fd00-fd1f : uhci_hcd
/proc/ioports: fe00-fe1f : 0000:00:1d.0
/proc/ioports: fe00-fe1f : uhci_hcd
/proc/ioports: ff00-ff07 : 0000:00:02.0
/proc/iomem: 00000000-0009f3ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f400-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000cc000-000ccfff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3f6dffff : System RAM
/proc/iomem: 00200000-003e2b08 : Kernel code
/proc/iomem: 003e2b09-004bbd47 : Kernel data
/proc/iomem: 3f6e0000-3f6e2fff : ACPI Non-volatile Storage
/proc/iomem: 3f6e3000-3f6effff : ACPI Tables
/proc/iomem: 3f6f0000-3f6fffff : reserved
/proc/iomem: d0000000-dfffffff : 0000:00:02.0
/proc/iomem: e0000000-efffffff : reserved
/proc/iomem: fd900000-fd9fffff : PCI Bus #01
/proc/iomem: fda00000-fdafffff : PCI Bus #03
/proc/iomem: fda00000-fda1ffff : 0000:03:03.0
/proc/iomem: fdb00000-fdbfffff : PCI Bus #03
/proc/iomem: fdbff000-fdbff0ff : 0000:03:03.0
/proc/iomem: fdbff000-fdbff0ff : r8169
/proc/iomem: fdc00000-fdcfffff : PCI Bus #01
/proc/iomem: fdd00000-fddfffff : PCI Bus #02
/proc/iomem: fdd00000-fdd0ffff : 0000:02:00.0
/proc/iomem: fde00000-fdefffff : PCI Bus #02
/proc/iomem: fdefe000-fdefffff : 0000:02:00.0
/proc/iomem: fdefe000-fdefffff : ahci
/proc/iomem: fdf00000-fdf7ffff : 0000:00:02.0
/proc/iomem: fdf80000-fdfbffff : 0000:00:02.0
/proc/iomem: fdff8000-fdffbfff : 0000:00:1b.0
/proc/iomem: fdffe000-fdffe3ff : 0000:00:1f.2
/proc/iomem: fdffe000-fdffe3ff : libata
/proc/iomem: fdfff000-fdfff3ff : 0000:00:1d.7
/proc/iomem: fdfff000-fdfff3ff : ehci_hcd
/proc/iomem: fec00000-ffffffff : reserved
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 166202 0 IO-APIC-edge timer
/proc/interrupts: 1: 8 0 IO-APIC-edge i8042
/proc/interrupts: 6: 2 0 IO-APIC-edge floppy
/proc/interrupts: 7: 0 0 IO-APIC-edge parport0
/proc/interrupts: 8: 0 0 IO-APIC-edge rtc
/proc/interrupts: 9: 0 0 IO-APIC-level acpi
/proc/interrupts: 169: 0 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 177: 0 0 IO-APIC-level uhci_hcd:usb2, libata
/proc/interrupts: 209: 344499 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5, eth0
/proc/interrupts: 217: 69815 0 IO-APIC-level uhci_hcd:usb3, libata
/proc/interrupts: NMI: 122 131
/proc/interrupts: LOC: 164659 164637
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1019516 kB
/proc/meminfo: MemFree: 49908 kB
/proc/meminfo: Buffers: 212 kB
/proc/meminfo: Cached: 824424 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 506136 kB
/proc/meminfo: Inactive: 339208 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1019516 kB
/proc/meminfo: LowFree: 49908 kB
/proc/meminfo: SwapTotal: 1951856 kB
/proc/meminfo: SwapFree: 1951856 kB
/proc/meminfo: Dirty: 440 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 20700 kB
/proc/meminfo: Mapped: 1972 kB
/proc/meminfo: Slab: 106272 kB
/proc/meminfo: PageTables: 396 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 2461612 kB
/proc/meminfo: Committed_AS: 25424 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 269568 kB
/proc/meminfo: VmallocChunk: 34359468747 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3802078f840d001 feffffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 43 structures occupying 1179 bytes.
dmidecode: Table at 0x000F0800.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Phoenix Technologies, LTD
dmidecode: Version: 6.00 PG
dmidecode: Release Date: 10/23/2006
dmidecode: Address: 0xE0000
dmidecode: Runtime Size: 128 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer:
dmidecode: Product Name:
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: UUID: Not Present
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Foxconn
dmidecode: Product Name: 945 7MD Series
dmidecode: Version:
dmidecode: Serial Number: UYBT64307386
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer:
dmidecode: Type: Desktop
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket 775
dmidecode: Type: Central Processor
dmidecode: Family: Other
dmidecode: Manufacturer: Intel
dmidecode: ID: F2 06 00 00 FF FB EB BF
dmidecode: Version: Intel(R) Core(TM)2 CPU
dmidecode: Voltage: 0.0 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 3066 MHz
dmidecode: Current Speed: 1800 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x000A
dmidecode: L2 Cache Handle: 0x000B
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x0005, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 8-bit Parity
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 4096 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: Supported Memory Types:
dmidecode: Other
dmidecode: Memory Module Voltage: 5.0 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0006
dmidecode: 0x0007
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0006, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A0
dmidecode: Bank Connections: 0
dmidecode: Current Speed: Unknown
dmidecode: Type: Other
dmidecode: Installed Size: 512 MB (Single-bank Connection)
dmidecode: Enabled Size: 512 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A1
dmidecode: Bank Connections: None
dmidecode: Current Speed: Unknown
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A2
dmidecode: Bank Connections: 4
dmidecode: Current Speed: Unknown
dmidecode: Type: Other
dmidecode: Installed Size: 512 MB (Single-bank Connection)
dmidecode: Enabled Size: 512 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A3
dmidecode: Bank Connections: None
dmidecode: Current Speed: Unknown
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000B, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: External Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: External
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRIMARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FDD
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: 8251 FIFO Compatible
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM2
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16450 Compatible
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LPT1
dmidecode: Internal Connector Type: DB-25 female
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Keyboard
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator:
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS/2 Mouse
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator:
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB3
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB4
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB5
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB6
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB7
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB8
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x001B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x001C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI3
dmidecode: Type: x1 PCI Express
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x001D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI4
dmidecode: Type: x16 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x001E, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 3
dmidecode: n|US|iso8859-1
dmidecode: n|US|iso8859-1
dmidecode: r|CA|iso8859-1
dmidecode: Currently Installed Language: n|US|iso8859-1
dmidecode:
dmidecode: Handle 0x001F, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0020, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x001F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A0
dmidecode: Bank Locator: Bank0/1
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0021, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x001F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A1
dmidecode: Bank Locator: Bank2/3
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0022, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x001F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A2
dmidecode: Bank Locator: Bank4/5
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0023, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x001F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A3
dmidecode: Bank Locator: Bank6/7
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0024, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Array Handle: 0x001F
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0025, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0020
dmidecode: Memory Array Mapped Address Handle: 0x0024
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0026, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0021
dmidecode: Memory Array Mapped Address Handle: 0x0024
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0027, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0022
dmidecode: Memory Array Mapped Address Handle: 0x0024
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0028, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0023
dmidecode: Memory Array Mapped Address Handle: 0x0024
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0029, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x002A, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: floppy-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Floppy driver
Package: preseed-common
Status: install ok installed
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: download-installer
Status: install ok installed
Version: 1.15
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: firmware-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Firmware request modules
Package: choose-mirror
Status: install ok installed
Version: 2.13
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: network-preseed
Status: install ok installed
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: gpgv-udeb
Status: install ok installed
Version: 1.4.6-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
Package: scsi-core-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Core SCSI subsystem
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: usb-serial-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di
Description: USB serial drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok installed
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok installed
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: nic-shared-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: nic-shared-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Shared NIC drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: usb-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: USB support
Package: nic-extra-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: nic-extra-modules
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di, crc-modules-2.6.18-4-amd64-di
Description: Rare NIC drivers
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.15
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16), gpgv-udeb
Description: Fetch modules from the Internet
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: input-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: input-modules
Depends: kernel-image-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di
Description: Input devices support
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: choose-mirror-bin
Status: install ok installed
Version: 2.13
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: serial-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: serial-modules
Depends: kernel-image-2.6.18-4-amd64-di, pcmcia-modules-2.6.18-4-amd64-di
Description: Serial drivers
Package: crc-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: crc-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: CRC modules
Package: fb-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: fb-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Frame buffer support
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: acpi-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: ACPI support modules
Package: zlib1g-udeb
Status: install ok installed
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: nic-pcmcia-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: nic-pcmcia-modules
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, nic-extra-modules-2.6.18-4-amd64-di, pcmcia-modules-2.6.18-4-amd64-di
Description: Common PCMCIA NIC drivers
Package: fat-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: fat-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: FAT filesystem support
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firewire-core-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-amd64-di, kernel-image-2.6.18-4-amd64-di
Description: Core FireWire drivers
Package: pcmcia-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di
Description: Common PCMCIA drivers
Package: nic-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: nic-modules
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di, firewire-core-modules-2.6.18-4-amd64-di
Description: Common NIC drivers
Package: debian-installer
Status: install ok installed
Version: netboot-20070308
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdrom-core-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, ide-modules-2.6.18-4-amd64-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 200
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 368
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: ide-core-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: ide-core-modules
Description: IDE support
This package contains core IDE support for the Linux kernel.
Package: ide-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 636
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, ide-core-modules-2.6.18-4-amd64-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1004
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2132
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 352
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 592
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 184
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: nic-usb-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 296
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.5-1)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: parport-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: parport-modules
Description: Parallel port support
This package contains parallel port drivers for the Linux kernel.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 888
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 884
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-storage-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, ide-core-modules-2.6.18-4-amd64-di, cdrom-core-modules-2.6.18-4-amd64-di, pcmcia-modules-2.6.18-4-amd64-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
This package contains PCMCIA storage drivers for the Linux kernel.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-common-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 864
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, cdrom-core-modules-2.6.18-4-amd64-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
This package contains very common SCSI drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1928
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: scsi-modules-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: scsi-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 696
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, scsi-common-modules-2.6.18-4-amd64-di, parport-modules-2.6.18-4-amd64-di, cdrom-core-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di
Provides: scsi-modules
Description: SCSI drivers
This package contains SCSI drivers for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-storage-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 172
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: ide-core-modules-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 696
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---