--- Begin Message ---
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: Official Etch 4.0r0 i386 Businesscard (Build: 07-Apr-2007 13:29)
<http://cdimage.debian.org/debian-cd/4.0_r0/i386/iso-cd/debian-40r0-i386-businesscard.iso>
Date: Tue Jul 17 18:27:52 EST 2007
Machine: HP e-PC C10
Partitions:
$ df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/mapper/e--pc-root
ext3 273674 70988 188555 28% /
tmpfs tmpfs 127940 0 127940 0% /lib/init/rw
udev tmpfs 10240 40 10200 1% /dev
tmpfs tmpfs 127940 0 127940 0% /dev/shm
/dev/hda1 ext3 241116 13248 215420 6% /boot
/dev/mapper/e--pc-home
ext3 144282288 192156 136760956 1% /home
/dev/mapper/e--pc-tmp
ext3 388741 10368 358303 3% /tmp
/dev/mapper/e--pc-usr
ext3 4922684 280512 4392112 7% /usr
/dev/mapper/e--pc-var
ext3 2955216 201576 2603524 8% /var
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [ ]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Minimal installation with no tasks selected. No problems were encountered.
--
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux e-pc 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82810E DC-133 GMCH [Graphics Memory Controller Hub] [8086:7124] (rev 03)
lspci -nn: 00:01.0 VGA compatible controller [0300]: Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller] [8086:7125] (rev 03)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418] (rev 02)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] (rev 02)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE [8086:2411] (rev 02)
lspci -nn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB [8086:2412] (rev 02)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus [8086:2413] (rev 02)
lspci -nn: 01:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82810E DC-133 GMCH [Graphics Memory Controller Hub] [8086:7124] (rev 03)
lspci -vnn: Subsystem: Intel Corporation 82810E DC-133 GMCH [Graphics Memory Controller Hub] [8086:7124]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn:
lspci -vnn: 00:01.0 VGA compatible controller [0300]: Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller] [8086:7125] (rev 03)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1243]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
lspci -vnn: Memory at e8000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: Capabilities: [dc] Power Management version 1
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418] (rev 02)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: I/O behind bridge: 0000c000-0000cfff
lspci -vnn: Memory behind bridge: efd00000-efdfffff
lspci -vnn: Prefetchable memory behind bridge: e7b00000-e7bfffff
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] (rev 02)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE [8086:2411] (rev 02) (prog-if 80 [Master])
lspci -vnn: Subsystem: Intel Corporation 82801AA IDE [8086:2411]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: I/O ports at ffa0 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB [8086:2412] (rev 02)
lspci -vnn: Subsystem: Intel Corporation 82801AA USB [8086:2412]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 5
lspci -vnn: I/O ports at dc00 [size=32]
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus [8086:2413] (rev 02)
lspci -vnn: Subsystem: Intel Corporation 82801AA SMBus [8086:2413]
lspci -vnn: Flags: medium devsel
lspci -vnn: I/O ports at 0540 [size=16]
lspci -vnn:
lspci -vnn: 01:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1247]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 9
lspci -vnn: I/O ports at cc00 [size=128]
lspci -vnn: Memory at efdfff80 (32-bit, non-prefetchable) [size=128]
lspci -vnn: Expansion ROM at e7b00000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
modulemap: 8086:2411 piix
modulemap: 8086:2412 uhci_hcd
modulemap: 10b7:9200 3c59x
lsmod: Module Size Used by
lsmod: sd_mod 18832 0
lsmod: scsi_mod 121352 1 sd_mod
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: dm_mod 48952 13
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 6
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: 3c59x 40360 0
lsmod: mii 5376 1 3c59x
lsmod: nls_iso8859_1 4096 0
lsmod: isofs 31544 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: vga16fb 11148 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: ide_disk 14720 3
lsmod: generic 5380 0 [permanent]
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: uhci_hcd 19980 0
lsmod: usbcore 108676 5 usbserial,usbhid,usbkbd,uhci_hcd
lsmod: piix 9092 0 [permanent]
lsmod: ide_core 107248 30 ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,ide_cd,ide_disk,generic,piix
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 127992 404 127588 0% /dev
df: tmpfs 127992 404 127588 0% /dev
df: tmpfs 127992 404 127588 0% /.dev
df: /dev/mapper/e--pc-root 273674 70934 188609 27% /target
df: /dev/ide/host0/bus0/target0/lun0/part1 241116 13248 215420 6% /target/boot
df: /dev/mapper/e--pc-home 144282288 192148 136760964 0% /target/home
df: /dev/mapper/e--pc-tmp 388741 10288 358383 3% /target/tmp
df: /dev/mapper/e--pc-usr 4922684 252536 4420088 5% /target/usr
df: /dev/mapper/e--pc-var 2955216 183152 2621948 7% /target/var
free: total used free shared buffers
free: Mem: 255988 240252 15736 0 8592
free: Swap: 765944 400 765544
free: Total: 1021932 240652 781280
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 8
/proc/cpuinfo: model name : Pentium III (Coppermine)
/proc/cpuinfo: stepping : 10
/proc/cpuinfo: cpu MHz : 935.477
/proc/cpuinfo: cache size : 256 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
/proc/cpuinfo: bogomips : 1872.18
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-047f : 0000:00:1f.0
/proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK
/proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK
/proc/ioports: 0408-040b : ACPI PM_TMR
/proc/ioports: 0410-0415 : ACPI CPU throttle
/proc/ioports: 0428-042b : ACPI GPE0_BLK
/proc/ioports: 042c-042f : ACPI GPE1_BLK
/proc/ioports: 0480-04bf : 0000:00:1f.0
/proc/ioports: 0540-054f : 0000:00:1f.3
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: c000-cfff : PCI Bus #01
/proc/ioports: cc00-cc7f : 0000:01:02.0
/proc/ioports: dc00-dc1f : 0000:00:1f.2
/proc/ioports: dc00-dc1f : uhci_hcd
/proc/ioports: ffa0-ffaf : 0000:00:1f.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000d0000-000dffff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-0fedffff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 0ff60000-0ff6ffff : ACPI Tables
/proc/iomem: 0ff70000-0ff7ffff : ACPI Non-volatile Storage
/proc/iomem: 0ff80000-0fffffff : reserved
/proc/iomem: e7b00000-e7bfffff : PCI Bus #01
/proc/iomem: e7b00000-e7b1ffff : 0000:01:02.0
/proc/iomem: e8000000-ebffffff : 0000:00:01.0
/proc/iomem: efd00000-efdfffff : PCI Bus #01
/proc/iomem: efdfff80-efdfffff : 0000:01:02.0
/proc/iomem: eff80000-efffffff : 0000:00:01.0
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 440802 XT-PIC timer
/proc/interrupts: 1: 469 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 5: 0 XT-PIC uhci_hcd:usb1
/proc/interrupts: 7: 1 XT-PIC parport0
/proc/interrupts: 9: 88821 XT-PIC eth0
/proc/interrupts: 11: 0 XT-PIC acpi
/proc/interrupts: 14: 35313 XT-PIC ide0
/proc/interrupts: 15: 599 XT-PIC ide1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 255988 kB
/proc/meminfo: MemFree: 15736 kB
/proc/meminfo: Buffers: 8592 kB
/proc/meminfo: Cached: 171008 kB
/proc/meminfo: SwapCached: 400 kB
/proc/meminfo: Active: 157384 kB
/proc/meminfo: Inactive: 62592 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 255988 kB
/proc/meminfo: LowFree: 15736 kB
/proc/meminfo: SwapTotal: 765944 kB
/proc/meminfo: SwapFree: 765544 kB
/proc/meminfo: Dirty: 1944 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 40012 kB
/proc/meminfo: Mapped: 2988 kB
/proc/meminfo: Slab: 15440 kB
/proc/meminfo: PageTables: 332 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 893936 kB
/proc/meminfo: Committed_AS: 45592 kB
/proc/meminfo: VmallocTotal: 777936 kB
/proc/meminfo: VmallocUsed: 4392 kB
/proc/meminfo: VmallocChunk: 773132 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 27 structures occupying 902 bytes.
dmidecode: Table at 0x000F0520.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: American Megatrends Inc.
dmidecode: Version: IN.02.02
dmidecode: Release Date: 02/22/2001
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Product Name: e-Vectra
dmidecode: Version:
dmidecode: Serial Number: SG11803667
dmidecode: UUID: E59902E1-409A-11D5-8DEF-E38CCB6DA3AA
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Product Name: HP System Board
dmidecode: Version: B01
dmidecode: Serial Number: S630QRR05110D03701
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Type: Space-saving
dmidecode: Lock: Present
dmidecode: Version: 1.0
dmidecode: Serial Number: 0000000
dmidecode: Asset Tag: N/A
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket 370
dmidecode: Type: Central Processor
dmidecode: Family: Pentium III
dmidecode: Manufacturer: i
dmidecode: ID: 8A 06 00 00 55 00 00 00
dmidecode: Signature: Type 0, Family 6, Model 8, Stepping 10
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: DE (Debugging extension)
dmidecode: TSC (Time stamp counter)
dmidecode: PAE (Physical address extension)
dmidecode: Version: Pentium III
dmidecode: Voltage: 2.0 V
dmidecode: External Clock: 133 MHz
dmidecode: Max Speed: 800 MHz
dmidecode: Current Speed: 933 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: None
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 256 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: None
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 5, 18 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: None
dmidecode: Error Correcting Capabilities: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 256 MB
dmidecode: Maximum Total Memory Size: 256 MB
dmidecode: Supported Speeds:
dmidecode: Unknown
dmidecode: Supported Memory Types:
dmidecode: DIMM
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 1
dmidecode: 0x0008
dmidecode: Enabled Error Correcting Capabilities: None
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM1
dmidecode: Bank Connections: 0 1
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 256 MB (Double-bank Connection)
dmidecode: Enabled Size: 256 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 10, 10 bytes
dmidecode: On Board Device 1 Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: Intel Corporation
dmidecode: On Board Device 2 Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description: AC97 Audio
dmidecode: On Board Device 3 Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: 3COM
dmidecode:
dmidecode: Handle 0x000A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM Port
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Serial Port
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LPT Port
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Parallel Port
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Primary IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: IDE-1
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Secondary IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: IDE-2
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Keyboard
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Keyboard
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Mouse
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS/2 Mouse
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB Port
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB 1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB Port
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB 2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0012, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: enUS
dmidecode: Currently Installed Language: enUS
dmidecode:
dmidecode: Handle 0x0013, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 256 MB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 1
dmidecode:
dmidecode: Handle 0x0014, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0013
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 32 bits
dmidecode: Data Width: 32 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM 1
dmidecode: Bank Locator: BANK 0
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x0015, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Array Handle: 0x0013
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0016, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0014
dmidecode: Memory Array Mapped Address Handle: 0x0015
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0017, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0018, DMI type 128, 15 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 80 0F 18 00 48 50 A7 49 4E 6E C7 00 F0 10 01
dmidecode:
dmidecode: Handle 0x0019, DMI type 136, 24 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 88 18 19 00 FF FF FF FF FF FF FF FF FF FF FF FF
dmidecode: FF FF FF FF FF FF FF FF
dmidecode:
dmidecode: Handle 0x001A, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support
Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support
Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers
Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers
Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support
Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver
Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules
Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support
Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem
Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-2
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libcrypto0.9.8-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1312
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Version: 0.9.8c-4
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Provides: libssl0.9.8
Description: crypto shared library - udeb
libcrypto shared library.
.
Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libnss-files-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for files - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains the files NSS helper needed for the Debian installer.
Do not install it on a normal system.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-console
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1)
Description: Continue installation remotely using SSH
Installer-Menu-Item: 21
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: openssh-server-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Matthew Vernon <matthew@debian.org>
Version: 1:4.3p2-9
Depends: libc6 (>= 2.3.6-6), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell server for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the sshd server for use in debian-installer.
Since it is expected to be used in specialized situations (e.g. S/390
installs with no console), it does not provide any configuration.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
--- End Message ---