Bug#433109: installation-reports: Successful installation on Thecus N2100
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: Netboot (via replacement firmware)
Image version:
<http://ftp.uk.debian.org/debian/dists/etch/main/installer-arm/rc2/images/iop32x/netboot/n2100.bin>
Date: Sat Jul 14 15:00:00 EST 2007
Machine: Thecus N2100
Partitions:
$ df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/mapper/n2100-root
reiserfs 204788 78140 126648 39% /
tmpfs tmpfs 258664 0 258664 0% /lib/init/rw
udev tmpfs 10240 32 10208 1% /dev
tmpfs tmpfs 258664 0 258664 0% /dev/shm
/dev/mapper/n2100-home
reiserfs 524268 32852 491416 7% /home
/dev/mapper/n2100-tmp
reiserfs 262132 32964 229168 13% /tmp
/dev/mapper/n2100-usr
reiserfs 1048540 168964 879576 17% /usr
/dev/mapper/n2100-var
reiserfs 485803536 164252 485639284 1% /var
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [ ]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Installation was performed as per listed procedure at
<http://www.cyrius.com/debian/iop/n2100/install.html>
Installer was able to create software RAID1 device along with LVM
physical volume, volume group and logical volumes.
No tasks were selected. No problems or issues were experienced.
--
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux n2100 2.6.18-4-iop32x #1 Thu Feb 22 03:51:25 UTC 2007 armv5tel unknown
lspci -nn: 00:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
lspci -nn: 00:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
lspci -nn: 00:03.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01)
lspci -nn: 00:04.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -nn: 00:04.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -nn: 00:04.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63)
lspci -vnn: 00:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
lspci -vnn: Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
lspci -vnn: I/O ports at fe000000 [size=256]
lspci -vnn: Memory at 800a0200 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Expansion ROM at 80080000 [disabled] [size=64K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn: Capabilities: [60] Vital Product Data
lspci -vnn:
lspci -vnn: 00:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
lspci -vnn: Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 30
lspci -vnn: I/O ports at fe000400 [size=256]
lspci -vnn: Memory at 800a0300 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Expansion ROM at 80090000 [disabled] [size=64K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn: Capabilities: [60] Vital Product Data
lspci -vnn:
lspci -vnn: 00:03.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01)
lspci -vnn: Subsystem: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29
lspci -vnn: I/O ports at fe000850 [size=8]
lspci -vnn: I/O ports at fe000860 [size=4]
lspci -vnn: I/O ports at fe000858 [size=8]
lspci -vnn: I/O ports at fe000864 [size=4]
lspci -vnn: I/O ports at fe000840 [size=16]
lspci -vnn: Memory at 800a0000 (32-bit, non-prefetchable) [size=512]
lspci -vnn: [virtual] Expansion ROM at 80000000 [disabled] [size=512K]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn:
lspci -vnn: 00:04.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -vnn: Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 22, IRQ 28
lspci -vnn: I/O ports at fe000800 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:04.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -vnn: Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 22, IRQ 27
lspci -vnn: I/O ports at fe000820 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:04.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20)
lspci -vnn: Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
lspci -vnn: Flags: bus master, medium devsel, latency 22, IRQ 29
lspci -vnn: Memory at 800a0400 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
modulemap: 10ec:8169 r8169
modulemap: 10ec:8169 r8169
modulemap: 1095:3512 sata_sil
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3104 ehci_hcd
lsmod: Module Size Used by
lsmod: dm_mod 59120 13
lsmod: raid456 119312 0
lsmod: xor 6888 1 raid456
lsmod: raid1 23488 1
lsmod: raid0 7648 0
lsmod: md_mod 80628 4 raid456,raid1,raid0
lsmod: reiserfs 269556 5
lsmod: ext3 137704 0
lsmod: jbd 59368 1 ext3
lsmod: mbcache 9188 1 ext3
lsmod: vfat 13152 0
lsmod: fat 53660 1 vfat
lsmod: isofs 37244 0
lsmod: ide_cd 41476 0
lsmod: cdrom 38364 1 ide_cd
lsmod: ide_disk 17056 0
lsmod: ide_generic 1216 0 [permanent]
lsmod: aec62xx 7264 0 [permanent]
lsmod: alim15x3 11980 0 [permanent]
lsmod: cmd64x 10940 0 [permanent]
lsmod: cs5520 4768 0 [permanent]
lsmod: cs5530 5248 0 [permanent]
lsmod: cy82c693 4708 0 [permanent]
lsmod: generic 5668 0 [permanent]
lsmod: hpt34x 5120 0 [permanent]
lsmod: it821x 8356 0 [permanent]
lsmod: ns87415 4180 0 [permanent]
lsmod: opti621 4484 0 [permanent]
lsmod: pdc202xx_new 8736 0 [permanent]
lsmod: pdc202xx_old 10496 0 [permanent]
lsmod: piix 9892 0 [permanent]
lsmod: sc1200 7232 0 [permanent]
lsmod: serverworks 9160 0 [permanent]
lsmod: siimage 12192 0 [permanent]
lsmod: slc90e66 5248 0 [permanent]
lsmod: triflex 3840 0 [permanent]
lsmod: trm290 4450 0 [permanent]
lsmod: via82cxxx 9508 0 [permanent]
lsmod: usb_storage 39332 0
lsmod: ide_core 114280 24 ide_cd,ide_disk,ide_generic,aec62xx,alim15x3,cmd64x,cs5520,cs5530,cy82c693,generic,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,sc1200,serverworks,siimage,slc90e66,triflex,trm290,via82cxxx
lsmod: sd_mod 19248 4
lsmod: sata_sil 12040 2
lsmod: libata 105460 1 sata_sil
lsmod: scsi_mod 102800 3 usb_storage,sd_mod,libata
lsmod: ehci_hcd 31016 0
lsmod: uhci_hcd 22312 0
lsmod: usbcore 125928 4 usb_storage,ehci_hcd,uhci_hcd
lsmod: r8169 30508 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 27868 74532 27% /
df: tmpfs 258664 392 258272 0% /dev
df: tmpfs 258664 392 258272 0% /dev
df: tmpfs 258664 392 258272 0% /.dev
df: /dev/mapper/n2100-root 204788 77960 126828 38% /target
df: /dev/mapper/n2100-home 524268 32840 491428 6% /target/home
df: /dev/mapper/n2100-tmp 262132 32840 229292 13% /target/tmp
df: /dev/mapper/n2100-usr 1048540 121860 926680 12% /target/usr
df: /dev/mapper/n2100-var 485803536 129596 485673940 0% /target/var
free: total used free shared buffers
free: Mem: 517328 391224 126104 0 66500
free: Swap: 524280 0 524280
free: Total: 1041608 391224 650384
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: Processor : XScale-80219 rev 0 (v5l)
/proc/cpuinfo: BogoMIPS : 593.10
/proc/cpuinfo: Features : swp half fastmult edsp
/proc/cpuinfo: CPU implementer : 0x69
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant : 0x0
/proc/cpuinfo: CPU part : 0x2e3
/proc/cpuinfo: CPU revision : 0
/proc/cpuinfo: Cache type : undefined 5
/proc/cpuinfo: Cache clean : undefined 5
/proc/cpuinfo: Cache lockdown : undefined 5
/proc/cpuinfo: Cache format : Harvard
/proc/cpuinfo: I size : 32768
/proc/cpuinfo: I assoc : 32
/proc/cpuinfo: I line length : 32
/proc/cpuinfo: I sets : 32
/proc/cpuinfo: D size : 32768
/proc/cpuinfo: D assoc : 32
/proc/cpuinfo: D line length : 32
/proc/cpuinfo: D sets : 32
/proc/cpuinfo:
/proc/cpuinfo: Hardware : Thecus N2100
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/ioports: fe000000-fe00ffff : N2100 PCI I/O Space
/proc/ioports: fe000000-fe0000ff : 0000:00:01.0
/proc/ioports: fe000000-fe0000ff : r8169
/proc/ioports: fe000400-fe0004ff : 0000:00:02.0
/proc/ioports: fe000400-fe0004ff : r8169
/proc/ioports: fe000800-fe00081f : 0000:00:04.0
/proc/ioports: fe000800-fe00081f : uhci_hcd
/proc/ioports: fe000820-fe00083f : 0000:00:04.1
/proc/ioports: fe000820-fe00083f : uhci_hcd
/proc/ioports: fe000840-fe00084f : 0000:00:03.0
/proc/ioports: fe000840-fe00084f : sata_sil
/proc/ioports: fe000850-fe000857 : 0000:00:03.0
/proc/ioports: fe000850-fe000857 : sata_sil
/proc/ioports: fe000858-fe00085f : 0000:00:03.0
/proc/ioports: fe000858-fe00085f : sata_sil
/proc/ioports: fe000860-fe000863 : 0000:00:03.0
/proc/ioports: fe000860-fe000863 : sata_sil
/proc/ioports: fe000864-fe000867 : 0000:00:03.0
/proc/ioports: fe000864-fe000867 : sata_sil
/proc/iomem: 80000000-83ffffff : N2100 PCI Memory Space
/proc/iomem: 80000000-8007ffff : 0000:00:03.0
/proc/iomem: 80080000-8008ffff : 0000:00:01.0
/proc/iomem: 80090000-8009ffff : 0000:00:02.0
/proc/iomem: 800a0000-800a01ff : 0000:00:03.0
/proc/iomem: 800a0000-800a01ff : sata_sil
/proc/iomem: 800a0200-800a02ff : 0000:00:01.0
/proc/iomem: 800a0200-800a02ff : r8169
/proc/iomem: 800a0300-800a03ff : 0000:00:02.0
/proc/iomem: 800a0300-800a03ff : r8169
/proc/iomem: 800a0400-800a04ff : 0000:00:04.2
/proc/iomem: 800a0400-800a04ff : ehci_hcd
/proc/iomem: a0000000-bfffffff : System RAM
/proc/iomem: a001f000-a0201347 : Kernel text
/proc/iomem: a0202000-a027a12f : Kernel data
/proc/iomem: fe800000-fe800007 : serial8250.0
/proc/iomem: fe800000-fe800007 : serial
/proc/iomem: fffff680-fffff698 : IOP3xx-I2C.0
/proc/iomem: fffff680-fffff697 : IOP3xx-I2C
/proc/interrupts: CPU0
/proc/interrupts: 9: 978134 IOP IOP3XX Timer Tick
/proc/interrupts: 11: 53 IOP IOP3xx-I2C
/proc/interrupts: 27: 112906 IOP uhci_hcd:usb2, eth0
/proc/interrupts: 28: 0 IOP uhci_hcd:usb1
/proc/interrupts: 29: 2691284 IOP ehci_hcd:usb3, libata
/proc/interrupts: Err: 0
/proc/meminfo: MemTotal: 517328 kB
/proc/meminfo: MemFree: 126088 kB
/proc/meminfo: Buffers: 66500 kB
/proc/meminfo: Cached: 271188 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 203392 kB
/proc/meminfo: Inactive: 155960 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 517328 kB
/proc/meminfo: LowFree: 126088 kB
/proc/meminfo: SwapTotal: 524280 kB
/proc/meminfo: SwapFree: 524280 kB
/proc/meminfo: Dirty: 2180 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 21700 kB
/proc/meminfo: Mapped: 2616 kB
/proc/meminfo: Slab: 19704 kB
/proc/meminfo: PageTables: 344 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 782944 kB
/proc/meminfo: Committed_AS: 54828 kB
/proc/meminfo: VmallocTotal: 483328 kB
/proc/meminfo: VmallocUsed: 20740 kB
/proc/meminfo: VmallocChunk: 458748 kB
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 57: dmidecode: not found
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: oldsys-preseed
Status: install ok unpacked
Version: 1.3
Depends: devio-udeb
Description: Preseed debian-installer from an existing device
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: nic-usb-modules-2.6.18-4-iop32x-di
Status: install ok unpacked
Version: 1.10
Provides: nic-usb-modules
Depends: kernel-image-2.6.18-4-iop32x-di, usb-modules-2.6.18-4-iop32x-di
Description: USB NIC drivers
Package: usb-modules-2.6.18-4-iop32x-di
Status: install ok unpacked
Version: 1.10
Provides: usb-modules
Depends: kernel-image-2.6.18-4-iop32x-di
Description: USB support
Package: download-installer
Status: install ok installed
Version: 1.15
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: choose-mirror
Status: install ok installed
Version: 2.13
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: network-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: gpgv-udeb
Status: install ok installed
Version: 1.4.6-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: openssh-server-udeb
Status: install ok installed
Version: 1:4.3p2-9
Depends: libc6 (>= 2.3.5-1), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell server for the Debian installer
Package: network-console
Status: install ok unpacked
Version: 1.11
Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1)
Description: Continue installation remotely using SSH
Installer-Menu-Item: 21
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: libnss-files-udeb
Status: install ok installed
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for files - udeb
Package: libcrypto0.9.8-udeb
Status: install ok installed
Version: 0.9.8c-4
Provides: libssl0.9.8
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: crypto shared library - udeb
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: kernel-image-2.6.18-4-iop32x-di
Status: install ok unpacked
Version: 1.10
Provides: kernel-image, socket-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: devio-udeb
Status: install ok unpacked
Version: 1.2-1
Depends: libc6 (>= 2.3.5-1)
Description: correctly read (or write) a region of a block device
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.15
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16), gpgv-udeb
Description: Fetch modules from the Internet
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: choose-mirror-bin
Status: install ok installed
Version: 2.13
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: cdebconf-priority
Status: install ok installed
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: zlib1g-udeb
Status: install ok installed
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: nic-modules-2.6.18-4-iop32x-di
Status: install ok unpacked
Version: 1.10
Provides: nic-modules
Depends: kernel-image-2.6.18-4-iop32x-di
Description: Common NIC drivers
Package: debian-installer
Status: install ok installed
Version: iop32x-netboot-20070308
Description: debian installation image
Package: acorn-fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Philip Blundell <pb@nexus.co.uk>
Version: 3.0.6-6.1
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 603
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdrom-core-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di, scsi-core-modules-2.6.18-4-iop32x-di, ide-modules-2.6.18-4-iop32x-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 128
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 392
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 284
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: flash-kernel-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1
Depends: cdebconf-udeb, base-installer
Provides: bootable-system
Description: Configure flash to boot the system
Installer-Menu-Item: 73
Package: glantank-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb, kernel-installer, archdetect
Provides: bootable-system
Description: Make GLAN Tank bootable
This package will install scripts to make the GLAN Tank bootable.
Installer-Menu-Item: 73
Package: ide-core-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di
Provides: ide-core-modules
Description: IDE support
This package contains core IDE support for the Linux kernel.
Package: ide-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 368
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di, ide-core-modules-2.6.18-4-iop32x-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1012
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1836
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 63
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 356
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: localechooser
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: loop-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 475
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 464
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 158
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 33
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 332
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1), partconf-mkfstab
Recommends: partitioned-harddrives
Provides: made-filesystems, made-swapspace, mounted-partitions, created-fstab
Description: Configure and Mount Partitions
User friendly debian-installer program for creating file systems,
swap partitions and mounting them in /target
Installer-Menu-Item: 45
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: partconf-mkfstab
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for creating fstab file
Helper program for creating fstab files in the new installed debian
system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 57
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partitioner
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 92
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.39
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, harddrive-detection, acorn-fdisk-udeb
Provides: partitioned-harddrives
Description: Partition a hard drive
Use this module to partition the physical disks in the system.
Installer-Menu-Item: 43
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 424
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 876
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 328
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 408
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di, scsi-core-modules-2.6.18-4-iop32x-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-core-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 184
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-iop32x-di
Provides: scsi-core-modules
Description: Core SCSI subsystem
This package contains the core SCSI subsystem for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-storage-modules-2.6.18-4-iop32x-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: ide-core-modules-2.6.18-4-iop32x-di, scsi-core-modules-2.6.18-4-iop32x-di, usb-modules-2.6.18-4-iop32x-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 284
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: lvmcfg
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, partitioned-harddrives, partconf-find-partitions
Description: Configure the Logical Volume Manager
Installer-Menu-Item: 44
Package: mdcfg
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: partitioned-harddrives
Description: Configure MD devices
Use this module to configure the MD devices.
Installer-Menu-Item: 45
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: arm (armv5tel)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-iop32x
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Reply to: