[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#404987: marked as done (installation-reports: minor error when configuring LVM)



Your message dated Thu, 12 Jul 2007 12:34:26 +0200
with message-id <87myy1syfh.fsf@gismo.pca.it>
and subject line Bug#404987: installation-reports: minor error when configuring LVM
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: installation-reports
Version: 2.23
Severity: normal

Hello,

here the report of a successful installation on a GNOME desktop
machine.  Only two problems, one at boot and the other one when
configuring the LVM (read below for the details).

Thx, bye,
Gismo / Luca

-- Package-specific info:

Boot method: netboot
Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-i386/rc1/images/netboot/netboot.tar.gz
Date: 2006/12/26 around 11:00+0100

Machine:
 motherboard ASUS A7V600-X
 processor AMD Sempron 2600+
 RAM installed 1GB
 HD SAMSUNG SP2504C (S-ATA 250GB)
 graphic card ASUS Radeon 9550 (RV350)
Partitions:
 luca@tinello:~$ /sbin/fdisk -l /dev/sda

 Disk /dev/sda: 250.0 GB, 250059350016 bytes
 255 heads, 63 sectors/track, 30401 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
 /dev/sda1   *           1        5099    40957686    7  HPFS/NTFS
 /dev/sda2            5100       30389   203141925    f  W95 Ext'd (LBA)
 /dev/sda3           30390       30401       96390   83  Linux
 /dev/sda5            5100       10199    40965718+   7  HPFS/NTFS
 /dev/sda6           10200       17848    61440561    7  HPFS/NTFS
 /dev/sda7           17849       28790    87891583+   7  HPFS/NTFS
 /dev/sda8           28791       30389    12843936   8e  Linux LVM
 luca@tinello:~$

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [E]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [E]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

Even if this machine has a CD/DVD drive, I wanted to try the netboot
installation and I found bug #404760 [1].  As explained in the bug,
disabling inetutils-inetd and starting in.tftpd-hpa as a daemon let me
perform the netboot and thus continue the installation.

All went smoothly until the hard disk partitioning step: I could
resize the last NTFS logical partition (/dev/sda7) and create two more
partitions (one primary for /boot and the other one for LVM).  Once
the changes written, I couldn't leave the partition step without
configuring the LVM (it complained about missing the / mount-point).
Then, when continuing it pointed me again to the configure LVM option,
which resulted in an error (sorry, I don't remember exactly the
words).  I skipped that part and the installation could finish with no
other errors.

BTW, grub was installed on the MBR and the X-autoconfiguration worked
out-of-the-box, with the graphic card set to use the 'vesa' driver.
Switching to the more appropriate 'ati' driver works out-of-the-box as
well (with only the s/vesa/ati/ substitution).

Footnotes: 
[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=404760

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061102)"
X_INSTALLATION_MEDIUM=netboot

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux tinello 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
lspci -nn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198]
lspci -nn: 00:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) [104c:8020]
lspci -nn: 00:0b.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 01)
lspci -nn: 00:0e.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
lspci -nn: 00:0e.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
lspci -nn: 00:0e.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
lspci -nn: 00:0e.4 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
lspci -nn: 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
lspci -nn: 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
lspci -nn: 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86)
lspci -nn: 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
lspci -nn: 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
lspci -nn: 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
lspci -nn: 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
lspci -nn: 00:13.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -nn: 00:13.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -nn: 00:13.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63)
lspci -nn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AS [Radeon 9550] [1002:4153]
lspci -nn: 01:00.1 Display controller [0380]: ATI Technologies Inc RV350 ?? [Radeon 9550] (Secondary) [1002:4173]
lspci -vnn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:807f]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 0
lspci -vnn: 	Memory at f8000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: 	Capabilities: [80] AGP version 3.5
lspci -vnn: 	Capabilities: [c0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -vnn: 	I/O behind bridge: 0000d000-0000dfff
lspci -vnn: 	Memory behind bridge: df000000-dfffffff
lspci -vnn: 	Prefetchable memory behind bridge: e0000000-f7ffffff
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) [104c:8020] (prog-if 10)
lspci -vnn: 	Subsystem: Accton Technology Corporation Unknown device [1113:1394]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: 	Memory at de800000 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: 	Memory at de000000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: 	Capabilities: [44] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:0b.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 01)
lspci -vnn: 	Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103]
lspci -vnn: 	Flags: bus master, slow devsel, latency 32, IRQ 5
lspci -vnn: 	Memory at dd800000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: 	I/O ports at b800 [size=32]
lspci -vnn: 
lspci -vnn: 00:0e.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
lspci -vnn: 	Subsystem: Hauppauge computer works Inc. Unknown device [0070:9402]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 10
lspci -vnn: 	Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: 	Capabilities: [44] Vital Product Data
lspci -vnn: 	Capabilities: [4c] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0e.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
lspci -vnn: 	Subsystem: Hauppauge computer works Inc. Unknown device [0070:9402]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 10
lspci -vnn: 	Memory at db000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: 	Capabilities: [4c] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0e.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
lspci -vnn: 	Subsystem: Hauppauge computer works Inc. Unknown device [0070:9402]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 10
lspci -vnn: 	Memory at da000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: 	Capabilities: [4c] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0e.4 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
lspci -vnn: 	Subsystem: Hauppauge computer works Inc. Unknown device [0070:9402]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 10
lspci -vnn: 	Memory at d9000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: 	Capabilities: [4c] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 209
lspci -vnn: 	I/O ports at b400 [size=8]
lspci -vnn: 	I/O ports at b000 [size=4]
lspci -vnn: 	I/O ports at a800 [size=8]
lspci -vnn: 	I/O ports at a400 [size=4]
lspci -vnn: 	I/O ports at a000 [size=16]
lspci -vnn: 	I/O ports at 9800 [size=256]
lspci -vnn: 	Capabilities: [c0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 209
lspci -vnn: 	I/O ports at 9400 [size=16]
lspci -vnn: 	Capabilities: [c0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: 	I/O ports at 9000 [size=32]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: 	I/O ports at 8800 [size=32]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: 	I/O ports at 8400 [size=32]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: 	I/O ports at 8000 [size=32]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: 	Memory at d8800000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, stepping, medium devsel, latency 0
lspci -vnn: 	Capabilities: [c0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:810d]
lspci -vnn: 	Flags: medium devsel
lspci -vnn: 	I/O ports at e000 [size=256]
lspci -vnn: 	Capabilities: [c0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
lspci -vnn: 	Flags: medium devsel
lspci -vnn: 	I/O ports at e500 [disabled] [size=256]
lspci -vnn: 	Capabilities: [d0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ed]
lspci -vnn: 	Flags: bus master, stepping, medium devsel, latency 32, IRQ 169
lspci -vnn: 	I/O ports at 7800 [size=256]
lspci -vnn: 	Memory at d8000000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Capabilities: [40] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:13.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -vnn: 	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 193
lspci -vnn: 	I/O ports at 7400 [size=32]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:13.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -vnn: 	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 201
lspci -vnn: 	I/O ports at 7000 [size=32]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:13.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20)
lspci -vnn: 	Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: 	Memory at d7800000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 
lspci -vnn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AS [Radeon 9550] [1002:4153]
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0038]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
lspci -vnn: 	Memory at f0000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: 	I/O ports at d800 [size=256]
lspci -vnn: 	Memory at df800000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: 	Expansion ROM at effe0000 [disabled] [size=128K]
lspci -vnn: 	Capabilities: [58] AGP version 3.0
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 
lspci -vnn: 01:00.1 Display controller [0380]: ATI Technologies Inc RV350 ?? [Radeon 9550] (Secondary) [1002:4173]
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0039]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 64
lspci -vnn: 	Memory at e0000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: 	Memory at df000000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 
lsmod: Module                  Size  Used by
lsmod: nls_iso8859_1           4224  0 
lsmod: qnx4                   10484  0 
lsmod: ntfs                  184468  0 
lsmod: dm_mod                 48696  5 
lsmod: xfs                   481140  0 
lsmod: reiserfs              210176  0 
lsmod: jfs                   156124  0 
lsmod: ext3                  115336  2 
lsmod: jbd                    45460  1 ext3
lsmod: vfat                   11520  0 
lsmod: fat                    45852  1 vfat
lsmod: isofs                  31672  0 
lsmod: ide_disk               14976  0 
lsmod: ide_generic             1408  0 [permanent]
lsmod: aec62xx                 6784  0 [permanent]
lsmod: alim15x3               11020  0 [permanent]
lsmod: amd74xx                12700  0 [permanent]
lsmod: atiixp                  5520  0 [permanent]
lsmod: cmd64x                 10140  0 [permanent]
lsmod: cs5520                  4608  0 [permanent]
lsmod: cs5530                  4864  0 [permanent]
lsmod: cs5535                  4224  0 [permanent]
lsmod: cy82c693                4356  0 [permanent]
lsmod: hpt34x                  4992  0 [permanent]
lsmod: it821x                  7812  0 [permanent]
lsmod: ns87415                 4168  0 [permanent]
lsmod: opti621                 4100  0 [permanent]
lsmod: pdc202xx_new            7936  0 [permanent]
lsmod: pdc202xx_old            9472  0 [permanent]
lsmod: piix                    9220  0 [permanent]
lsmod: rz1000                  2688  0 [permanent]
lsmod: sc1200                  6656  0 [permanent]
lsmod: serverworks             8200  0 [permanent]
lsmod: siimage                10752  0 [permanent]
lsmod: sis5513                12424  0 [permanent]
lsmod: slc90e66                5120  0 [permanent]
lsmod: triflex                 3712  0 [permanent]
lsmod: trm290                  3972  0 [permanent]
lsmod: ide_cd                 35104  0 
lsmod: cdrom                  32288  1 ide_cd
lsmod: via82cxxx               8324  0 [permanent]
lsmod: sd_mod                 18448  3 
lsmod: generic                 4356  0 [permanent]
lsmod: sata_via                8324  2 
lsmod: parport_pc             31524  0 
lsmod: parport                31944  1 parport_pc
lsmod: libata                 60300  1 sata_via
lsmod: usb_storage            69952  0 
lsmod: ide_core              107940  30 ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,ide_cd,via82cxxx,generic,usb_storage
lsmod: sbp2                   20232  0 
lsmod: scsi_mod              120840  4 sd_mod,libata,usb_storage,sbp2
lsmod: floppy                 52868  0 
lsmod: vga16fb                11400  2 
lsmod: vgastate                7808  1 vga16fb
lsmod: usbserial              28136  0 
lsmod: usbhid                 35040  0 
lsmod: eth1394                17412  0 
lsmod: usbkbd                  6656  0 
lsmod: thermal                12680  0 
lsmod: processor              21440  1 thermal
lsmod: fan                     4484  0 
lsmod: ohci1394               29488  0 
lsmod: ieee1394               84536  3 sbp2,eth1394,ohci1394
lsmod: uhci_hcd               19464  0 
lsmod: ehci_hcd               26888  0 
lsmod: via_rhine              20612  0 
lsmod: mii                     5248  1 via_rhine
lsmod: usbcore               108544  7 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd,ehci_hcd
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                   518452       440    518012   0% /dev
df: tmpfs                   518452       440    518012   0% /dev
df: tmpfs                   518452       440    518012   0% /.dev
df: /dev/mapper/vgtinello-lvroot  11607264   2424724   8592924  22% /target
df: /dev/scsi/host1/bus0/target0/lun0/part3     93327     12760     75748  14% /target/boot
free:               total         used         free       shared      buffers
free:   Mem:      1036904      1013984        22920            0        69456
free:  Swap:      1048568          436      1048132
free: Total:      2085472      1014420      1071052
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: processor	: 0
/proc/cpuinfo: vendor_id	: AuthenticAMD
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 8
/proc/cpuinfo: model name	: AMD Sempron(TM) 2600+
/proc/cpuinfo: stepping	: 1
/proc/cpuinfo: cpu MHz		: 1822.920
/proc/cpuinfo: cache size	: 256 KB
/proc/cpuinfo: fdiv_bug	: no
/proc/cpuinfo: hlt_bug		: no
/proc/cpuinfo: f00f_bug	: no
/proc/cpuinfo: coma_bug	: no
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 1
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow up ts
/proc/cpuinfo: bogomips	: 3648.88
/proc/cpuinfo: 
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 0290-0297 : pnp 00:0e
/proc/ioports: 0370-0375 : pnp 00:0e
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0778-077a : parport0
/proc/ioports: 7000-701f : 0000:00:13.1
/proc/ioports:   7000-701f : uhci_hcd
/proc/ioports: 7400-741f : 0000:00:13.0
/proc/ioports:   7400-741f : uhci_hcd
/proc/ioports: 7800-78ff : 0000:00:12.0
/proc/ioports:   7800-78ff : via-rhine
/proc/ioports: 8000-801f : 0000:00:10.3
/proc/ioports:   8000-801f : uhci_hcd
/proc/ioports: 8400-841f : 0000:00:10.2
/proc/ioports:   8400-841f : uhci_hcd
/proc/ioports: 8800-881f : 0000:00:10.1
/proc/ioports:   8800-881f : uhci_hcd
/proc/ioports: 9000-901f : 0000:00:10.0
/proc/ioports:   9000-901f : uhci_hcd
/proc/ioports: 9400-940f : 0000:00:0f.1
/proc/ioports:   9400-9407 : ide0
/proc/ioports:   9408-940f : ide1
/proc/ioports: 9800-98ff : 0000:00:0f.0
/proc/ioports:   9800-98ff : sata_via
/proc/ioports: a000-a00f : 0000:00:0f.0
/proc/ioports:   a000-a00f : sata_via
/proc/ioports: a400-a403 : 0000:00:0f.0
/proc/ioports:   a400-a403 : sata_via
/proc/ioports: a800-a807 : 0000:00:0f.0
/proc/ioports:   a800-a807 : sata_via
/proc/ioports: b000-b003 : 0000:00:0f.0
/proc/ioports:   b000-b003 : sata_via
/proc/ioports: b400-b407 : 0000:00:0f.0
/proc/ioports:   b400-b407 : sata_via
/proc/ioports: b800-b81f : 0000:00:0b.0
/proc/ioports: d000-dfff : PCI Bus #01
/proc/ioports:   d800-d8ff : 0000:01:00.0
/proc/ioports: e000-e0ff : 0000:00:11.5
/proc/ioports: e400-e47f : motherboard
/proc/ioports:   e400-e403 : PM1a_EVT_BLK
/proc/ioports:   e404-e405 : PM1a_CNT_BLK
/proc/ioports:   e408-e40b : PM_TMR
/proc/ioports:   e420-e423 : GPE0_BLK
/proc/ioports: e500-e5ff : 0000:00:11.6
/proc/ioports: e800-e81f : motherboard
/proc/ioports:   e800-e81f : pnp 00:02
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem:   00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cffff : Video ROM
/proc/iomem: 000d8000-000d97ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3fffafff : System RAM
/proc/iomem:   00100000-0026c0f2 : Kernel code
/proc/iomem:   0026c0f3-002f9cef : Kernel data
/proc/iomem: 3fffb000-3fffefff : ACPI Tables
/proc/iomem: 3ffff000-3fffffff : ACPI Non-volatile Storage
/proc/iomem: d7800000-d78000ff : 0000:00:13.2
/proc/iomem:   d7800000-d78000ff : ehci_hcd
/proc/iomem: d8000000-d80000ff : 0000:00:12.0
/proc/iomem:   d8000000-d80000ff : via-rhine
/proc/iomem: d8800000-d88000ff : 0000:00:10.4
/proc/iomem:   d8800000-d88000ff : ehci_hcd
/proc/iomem: d9000000-d9ffffff : 0000:00:0e.4
/proc/iomem: da000000-daffffff : 0000:00:0e.2
/proc/iomem: db000000-dbffffff : 0000:00:0e.1
/proc/iomem: dc000000-dcffffff : 0000:00:0e.0
/proc/iomem: dd800000-dd80ffff : 0000:00:0b.0
/proc/iomem: de000000-de003fff : 0000:00:0a.0
/proc/iomem: de800000-de8007ff : 0000:00:0a.0
/proc/iomem:   de800000-de8007ff : ohci1394
/proc/iomem: df000000-dfffffff : PCI Bus #01
/proc/iomem:   df000000-df00ffff : 0000:01:00.1
/proc/iomem:   df800000-df80ffff : 0000:01:00.0
/proc/iomem: e0000000-f7ffffff : PCI Bus #01
/proc/iomem:   e0000000-e7ffffff : 0000:01:00.1
/proc/iomem:   effe0000-efffffff : 0000:01:00.0
/proc/iomem:   f0000000-f7ffffff : 0000:01:00.0
/proc/iomem: f8000000-fbffffff : 0000:00:00.0
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ffff0000-ffffffff : reserved
/proc/interrupts:            CPU0       
/proc/interrupts:   0:     723992    IO-APIC-edge  timer
/proc/interrupts:   1:       1708    IO-APIC-edge  i8042
/proc/interrupts:   7:          0    IO-APIC-edge  parport0
/proc/interrupts:   9:          0   IO-APIC-level  acpi
/proc/interrupts:  15:        485    IO-APIC-edge  ide1
/proc/interrupts: 169:     602548   IO-APIC-level  eth0
/proc/interrupts: 177:       4881   IO-APIC-level  ehci_hcd:usb1, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, uhci_hcd:usb6
/proc/interrupts: 185:          5   IO-APIC-level  ehci_hcd:usb2, ohci1394
/proc/interrupts: 193:         32   IO-APIC-level  uhci_hcd:usb7
/proc/interrupts: 201:          0   IO-APIC-level  uhci_hcd:usb8
/proc/interrupts: 209:      92880   IO-APIC-level  libata
/proc/interrupts: NMI:          0 
/proc/interrupts: LOC:     723908 
/proc/interrupts: ERR:          0
/proc/interrupts: MIS:          0
/proc/meminfo: MemTotal:      1036904 kB
/proc/meminfo: MemFree:         22824 kB
/proc/meminfo: Buffers:         69456 kB
/proc/meminfo: Cached:         859624 kB
/proc/meminfo: SwapCached:          0 kB
/proc/meminfo: Active:         340432 kB
/proc/meminfo: Inactive:       606552 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:      1036904 kB
/proc/meminfo: LowFree:         22824 kB
/proc/meminfo: SwapTotal:     1048568 kB
/proc/meminfo: SwapFree:      1048132 kB
/proc/meminfo: Dirty:            1544 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: Mapped:          19748 kB
/proc/meminfo: Slab:            56700 kB
/proc/meminfo: CommitLimit:   1567020 kB
/proc/meminfo: Committed_AS:    21828 kB
/proc/meminfo: PageTables:        236 kB
/proc/meminfo: VmallocTotal:   253648 kB
/proc/meminfo: VmallocUsed:      8912 kB
/proc/meminfo: VmallocChunk:   244100 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd 
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices: 
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 53 structures occupying 1455 bytes.
dmidecode: Table at 0x000F38A0.
dmidecode: 
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: 	Vendor: Award Software, Inc.
dmidecode: 	Version: ASUS A7V600-X ACPI BIOS Revision 1009
dmidecode: 	Release Date: 06/28/2005
dmidecode: 	Address: 0xF0000
dmidecode: 	Runtime Size: 64 kB
dmidecode: 	ROM Size: 256 kB
dmidecode: 	Characteristics:
dmidecode: 		PCI is supported
dmidecode: 		PNP is supported
dmidecode: 		APM is supported
dmidecode: 		BIOS is upgradeable
dmidecode: 		BIOS shadowing is allowed
dmidecode: 		ESCD support is available
dmidecode: 		Boot from CD is supported
dmidecode: 		Selectable boot is supported
dmidecode: 		BIOS ROM is socketed
dmidecode: 		EDD is supported
dmidecode: 		5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 		5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 		3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 		3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: 		Print screen service is supported (int 5h)
dmidecode: 		8042 keyboard services are supported (int 9h)
dmidecode: 		Serial services are supported (int 14h)
dmidecode: 		Printer services are supported (int 17h)
dmidecode: 		CGA/mono video services are supported (int 10h)
dmidecode: 		ACPI is supported
dmidecode: 		USB legacy is supported
dmidecode: 		AGP is supported
dmidecode: 
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: 	Manufacturer: System Manufacturer
dmidecode: 	Product Name: System Name
dmidecode: 	Version: System Version
dmidecode: 	Serial Number: SYS-1234567890
dmidecode: 	UUID: Not Settable
dmidecode: 	Wake-up Type: Power Switch
dmidecode: 
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: 	Manufacturer: ASUSTeK Computer INC.
dmidecode: 	Product Name: A7V600-X
dmidecode: 	Version: REV 1.xx
dmidecode: 	Serial Number: xxxxxxxxxxx
dmidecode: 
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: 	Manufacturer: Chassis Manufacture
dmidecode: 	Type: Tower
dmidecode: 	Lock: Not Present
dmidecode: 	Version: Chassis Version
dmidecode: 	Serial Number: Chassis Serial Number
dmidecode: 	Asset Tag: Asset-1234567890
dmidecode: 	Boot-up State: Safe
dmidecode: 	Power Supply State: Safe
dmidecode: 	Thermal State: Safe
dmidecode: 	Security Status: Unknown
dmidecode: 	OEM Information: 0x00000002
dmidecode: 
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: 	Socket Designation: SOCKET A
dmidecode: 	Type: Central Processor
dmidecode: 	Family: Other
dmidecode: 	Manufacturer: AuthenticAMD
dmidecode: 	ID: 81 06 00 00 FF FB 83 03
dmidecode: 	Version: AMD Sempron(TM) 2600+
dmidecode: 	Voltage: 1.5 V
dmidecode: 	External Clock: 166 MHz
dmidecode: 	Max Speed: 2250 MHz
dmidecode: 	Current Speed: 1833 MHz
dmidecode: 	Status: Populated, Enabled
dmidecode: 	Upgrade: Other
dmidecode: 	L1 Cache Handle: 0x0009
dmidecode: 	L2 Cache Handle: 0x000A
dmidecode: 	L3 Cache Handle: Not Provided
dmidecode: 
dmidecode: Handle 0x0005, DMI type 5, 22 bytes
dmidecode: Memory Controller Information
dmidecode: 	Error Detecting Method: None
dmidecode: 	Error Correcting Capabilities:
dmidecode: 		Other
dmidecode: 	Supported Interleave: Unknown
dmidecode: 	Current Interleave: Unknown
dmidecode: 	Maximum Memory Module Size: 1024 MB
dmidecode: 	Maximum Total Memory Size: 3072 MB
dmidecode: 	Supported Speeds:
dmidecode: 		70 ns
dmidecode: 		60 ns
dmidecode: 		50 ns
dmidecode: 	Supported Memory Types:
dmidecode: 		ECC
dmidecode: 		DIMM
dmidecode: 		SDRAM
dmidecode: 	Memory Module Voltage: 3.3 V
dmidecode: 	Associated Memory Slots: 3
dmidecode: 		0x0006
dmidecode: 		0x0007
dmidecode: 		0x0008
dmidecode: 	Enabled Error Correcting Capabilities:
dmidecode: 		Unknown
dmidecode: 
dmidecode: Handle 0x0006, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM 1
dmidecode: 	Bank Connections: 0 1
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: 512 MB (Double-bank Connection)
dmidecode: 	Enabled Size: 512 MB (Double-bank Connection)
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM 2
dmidecode: 	Bank Connections: 2 3
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: 512 MB (Double-bank Connection)
dmidecode: 	Enabled Size: 512 MB (Double-bank Connection)
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM 3
dmidecode: 	Bank Connections: 4 5
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: Not Installed
dmidecode: 	Enabled Size: Not Installed
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x0009, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: L1 Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 1
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 128 KB
dmidecode: 	Maximum Size: 128 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Pipeline Burst
dmidecode: 		Synchronous
dmidecode: 	Installed SRAM Type: Pipeline Burst Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Unknown
dmidecode: 	System Type: Data
dmidecode: 	Associativity: 4-way Set-associative
dmidecode: 
dmidecode: Handle 0x000A, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: L2 Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 2
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 256 KB
dmidecode: 	Maximum Size: 8192 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Pipeline Burst
dmidecode: 		Synchronous
dmidecode: 	Installed SRAM Type: Pipeline Burst Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Unknown
dmidecode: 	System Type: Data
dmidecode: 	Associativity: 4-way Set-associative
dmidecode: 
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: PRIMARY IDE/HDD
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: None
dmidecode: 
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: SECONDARY IDE/HDD
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: None
dmidecode: 
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: FLOPPY
dmidecode: 	Internal Connector Type: On Board Floppy
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: None
dmidecode: 
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB1
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB2
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB3
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB4
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB5
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB6
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB7
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB8
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: PS/2 Keyboard
dmidecode: 	External Connector Type: PS/2
dmidecode: 	Port Type: Keyboard Port
dmidecode: 
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: PS/2 Mouse
dmidecode: 	External Connector Type: PS/2
dmidecode: 	Port Type: Mouse Port
dmidecode: 
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Parallel Port
dmidecode: 	External Connector Type: DB-25 female
dmidecode: 	Port Type: Parallel Port ECP/EPP
dmidecode: 
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Serial Port 1
dmidecode: 	External Connector Type: DB-9 male
dmidecode: 	Port Type: Serial Port 16550 Compatible
dmidecode: 
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Joystick Port
dmidecode: 	External Connector Type: DB-15 female
dmidecode: 	Port Type: Joystick Port
dmidecode: 
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: MIDI Port
dmidecode: 	External Connector Type: DB-15 female
dmidecode: 	Port Type: MIDI Port
dmidecode: 
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Line In Jack
dmidecode: 	External Connector Type: Mini Jack (headphones)
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: LAN-00112F415D91G
dmidecode: 	External Connector Type: RJ-45
dmidecode: 	Port Type: Network Port
dmidecode: 
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Serial ATA 1
dmidecode: 	External Connector Type: Other
dmidecode: 	Port Type: None
dmidecode: 
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Serial ATA 2
dmidecode: 	External Connector Type: Other
dmidecode: 	Port Type: None
dmidecode: 
dmidecode: Handle 0x0020, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI 1
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Short
dmidecode: 	ID: 1
dmidecode: 	Characteristics:
dmidecode: 		5.0 V is provided
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0021, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI 2
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Short
dmidecode: 	ID: 2
dmidecode: 	Characteristics:
dmidecode: 		5.0 V is provided
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0022, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI 3
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: In Use
dmidecode: 	Length: Short
dmidecode: 	ID: 3
dmidecode: 	Characteristics:
dmidecode: 		5.0 V is provided
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0023, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI 4
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: In Use
dmidecode: 	Length: Short
dmidecode: 	ID: 4
dmidecode: 	Characteristics:
dmidecode: 		5.0 V is provided
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0024, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI 5
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: In Use
dmidecode: 	Length: Short
dmidecode: 	ID: 5
dmidecode: 	Characteristics:
dmidecode: 		5.0 V is provided
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0025, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI 6
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: In Use
dmidecode: 	Length: Short
dmidecode: 	ID: 6
dmidecode: 	Characteristics:
dmidecode: 		5.0 V is provided
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0026, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: AGP
dmidecode: 	Type: 32-bit AGP 8x
dmidecode: 	Current Usage: In Use
dmidecode: 	Length: Short
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 
dmidecode: Handle 0x0027, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: 	String 1: datamaticspa
dmidecode: 	String 2: 0
dmidecode: 
dmidecode: Handle 0x0028, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: 	Installable Languages: 1
dmidecode: 		en|US|iso8859-1
dmidecode: 	Currently Installed Language: en|US|iso8859-1
dmidecode: 
dmidecode: Handle 0x0029, DMI type 14, 14 bytes
dmidecode: Group Associations
dmidecode: 	Name: Cpu Module
dmidecode: 	Items: 3
dmidecode: 		0x0004 (Processor)
dmidecode: 		0x0009 (Cache)
dmidecode: 		0x000A (Cache)
dmidecode: 
dmidecode: Handle 0x002A, DMI type 14, 29 bytes
dmidecode: Group Associations
dmidecode: 	Name: Memory Module Set
dmidecode: 	Items: 8
dmidecode: 		0x0028 (Physical Memory Array)
dmidecode: 		0x0029 (Memory Device)
dmidecode: 		0x002D (Memory Device Mapped Address)
dmidecode: 		0x002A (Memory Device)
dmidecode: 		0x002E (Memory Device Mapped Address)
dmidecode: 		0x002B (Memory Device)
dmidecode: 		0x002F (Memory Device Mapped Address)
dmidecode: 		0x002C (Memory Array Mapped Address)
dmidecode: 
dmidecode: Handle 0x002B, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: 	Location: System Board Or Motherboard
dmidecode: 	Use: System Memory
dmidecode: 	Error Correction Type: None
dmidecode: 	Maximum Capacity: 3 GB
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Number Of Devices: 3
dmidecode: 
dmidecode: Handle 0x002C, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x002B
dmidecode: 	Error Information Handle: No Error
dmidecode: 	Total Width: 64 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: 512 MB
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: 1
dmidecode: 	Locator: DDR 1
dmidecode: 	Bank Locator: Not Specified
dmidecode: 	Type: DRAM
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 
dmidecode: Handle 0x002D, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x002B
dmidecode: 	Error Information Handle: No Error
dmidecode: 	Total Width: 64 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: 512 MB
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: 2
dmidecode: 	Locator: DDR 2
dmidecode: 	Bank Locator: Not Specified
dmidecode: 	Type: DRAM
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 
dmidecode: Handle 0x002E, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x002B
dmidecode: 	Error Information Handle: No Error
dmidecode: 	Total Width: Unknown
dmidecode: 	Data Width: Unknown
dmidecode: 	Size: No Module Installed
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: 3
dmidecode: 	Locator: DDR 3
dmidecode: 	Bank Locator: Not Specified
dmidecode: 	Type: DRAM
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 
dmidecode: Handle 0x002F, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x0003FFFFFFF
dmidecode: 	Range Size: 1 GB
dmidecode: 	Physical Array Handle: 0x0028
dmidecode: 	Partition Width: 0
dmidecode: 
dmidecode: Handle 0x0030, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x0001FFFFFFF
dmidecode: 	Range Size: 512 MB
dmidecode: 	Physical Device Handle: 0x002C
dmidecode: 	Memory Array Mapped Address Handle: 0x002C
dmidecode: 	Partition Row Position: 1
dmidecode: 
dmidecode: Handle 0x0031, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00020000000
dmidecode: 	Ending Address: 0x0003FFFFFFF
dmidecode: 	Range Size: 512 MB
dmidecode: 	Physical Device Handle: 0x002D
dmidecode: 	Memory Array Mapped Address Handle: 0x002C
dmidecode: 	Partition Row Position: 2
dmidecode: 
dmidecode: Handle 0x0032, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode: 
dmidecode: Handle 0x0033, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: 	Status: No errors detected
dmidecode: 
dmidecode: Handle 0x0034, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode: 

==============================================
Installer status:
==============================================
Package: input-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: input-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Input devices support

Package: acpi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-486-di
Description: ACPI support modules

Package: nic-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: nic-modules
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di
Description: Common NIC drivers

Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.29
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for DNS - udeb

Package: download-installer
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23

Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: usb-serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB serial drivers

Package: nic-extra-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: nic-extra-modules
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di
Description: Rare NIC drivers

Package: di-utils
Status: install ok installed
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: usb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: USB support

Package: choose-mirror
Status: install ok installed
Version: 2.08
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23

Package: scsi-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Core SCSI subsystem

Package: network-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: crc-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: crc-modules
Depends: kernel-image-2.6.17-2-486-di
Description: CRC modules

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.40
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: firmware-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Firmware request modules

Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.2
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon

Package: fb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Frame buffer support

Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb

Package: pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: Common PCMCIA drivers

Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: serial-modules
Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Serial drivers

Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: floppy-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Floppy driver

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System

Package: firewire-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Core FireWire drivers

Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file

Package: floppy-retriever
Status: install ok unpacked
Version: 1.11
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy

Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: net-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet

Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector

Package: nic-pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: nic-pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Common PCMCIA NIC drivers

Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs

Package: choose-mirror-bin
Status: install ok installed
Version: 2.08
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.39
Description: Terminfo entries needed by newt/slang in debian installer

Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: nic-shared-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: nic-shared-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Shared NIC drivers

Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables

Package: mountfloppy
Status: install ok unpacked
Version: 0.8
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: fat-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fat-modules
Depends: kernel-image-2.6.17-2-486-di
Description: FAT filesystem support

Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: kernel-image-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: debian-installer
Status: install ok installed
Version: netboot-20061102
Description: debian installation image

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: cdrom-core-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di
Provides: cdrom-core-modules
Description: CDROM support
 This package contains core CDROM support for the Linux kernel.

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 224
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.1
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: di-utils-exit-installer
Status: install ok unpacked
Priority: extra
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: cdebconf-udeb
Description: Exit installer
Installer-Menu-Item: 990

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
 This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76

Package: ext3-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-15
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
 fdisk package

Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73

Package: ide-core-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ide-core-modules
Description: IDE support
 This package contains core IDE support for the Linux kernel.

Package: ide-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 420
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di
Provides: ide-modules
Description: IDE drivers
 This package contains IDE drivers for the Linux kernel.

Package: jfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
 This package contains the JFS filesystem module for the Linux kernel.

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1576
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-8
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libcrypto0.9.8-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1312
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Version: 0.9.8c-4
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Provides: libssl0.9.8
Description: crypto shared library - udeb
 libcrypto shared library.
 .
 Do not install it on a normal system.

Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: libnss-files-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 36
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-8
Description: GNU C Library: NSS helper for files - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains the files NSS helper needed for the Debian installer.
 Do not install it on a normal system.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libslang2-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 648
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Version: 2.0.6-4
Depends: libc-udeb
Description: S-Lang library for Debian Installer
 This is a udeb, or a microdeb, of the S-Lang library with wide charater
 support. As such it is the installer counterpart of libslang2.
 You only need this package to support applications needing S-Lang during
 the Debian installation process time and probably don't need to select it.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.
 .
 This is a minimal package for debian-installer.

Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75

Package: loop-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
 This package contains loopback filesystem support for the Linux kernel.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: lvmcfg
Status: install ok half-configured
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, partitioned-harddrives, partconf-find-partitions
Description: Configure the Logical Volume Manager
Installer-Menu-Item: 44

Package: md-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: md-modules
Description: RAID and LVM support
 This package contains RAID and LVM modules for the Linux kernel.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-6
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 arrays (e.g. software RAID, multipath devices).
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: nano-udeb
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Jordi Mallach <jordi@debian.org>
Version: 2.0.1-1
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Provides: editor
Description: free Pico clone with some new features - tiny build
 GNU nano is a free replacement for Pico, the default Pine editor. Pine is
 copyrighted under a restrictive licence, that makes it unsuitable for
 Debian's main section. GNU nano is an effort to provide a Pico-like
 editor, but also includes some features that were missing in the original,
 such as 'search and replace', 'goto line' or internationalization support.
 .
 This package contains a minimal build of GNU nano, aimed for use in
 debian-installer. Thus, many features are disabled in this version.

Package: netcfg-static
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 592
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), cdebconf-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure a static network
 If you have information such as IP address, netmask, gateway, then you will be
 able to configure a static network.  If you don't know this information, you
 should ask your system administrator, or look at configuration via DHCP.
Installer-Menu-Item: 18

Package: network-console
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.8
Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1)
Description: Continue installation remotely using SSH
Installer-Menu-Item: 21

Package: nic-usb-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
 This package contains USB network adapter drivers for the Linux kernel.

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: ntfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
 This package contains the NTFS file system module for the Linux kernel.

Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
 Currently this udeb contains only ntfsresize.

Package: openssh-client-udeb
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 320
Maintainer: Matthew Vernon <matthew@debian.org>
Version: 1:4.3p2-7
Depends: libc6 (>= 2.3.6-6), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell client for the Debian installer
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 This package provides the ssh client for use in debian-installer.
Installer-Menu-Item: 999

Package: openssh-server-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 344
Maintainer: Matthew Vernon <matthew@debian.org>
Version: 1:4.3p2-7
Depends: libc6 (>= 2.3.6-6), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell server for the Debian installer
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 This package provides the sshd server for use in debian-installer.
 Since it is expected to be used in specialized situations (e.g. S/390
 installs with no console), it does not provide any configuration.

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: parport-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: parport-modules
Description: Parallel port support
 This package contains parallel port drivers for the Linux kernel.

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 848
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 856
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 11
Depends: partman-base
Description: Add to partman support for EFI boot partitions

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pcmcia-storage-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
 This package contains PCMCIA storage drivers for the Linux kernel.

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: reiserfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.

Package: rescue-mode
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: rescue-check, cdebconf-udeb (>= 0.73), harddrive-detection, ext2-modules, ext3-modules, fat-modules, jfs-modules, md-modules, reiserfs-modules, xfs-modules, lvm2-udeb, mdadm-udeb (>= 2.5.2), di-utils (>= 1.15)
Description: mount requested partition and start a rescue shell
Installer-Menu-Item: 39

Package: sata-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: sata-modules
Description: SATA drivers
 This package contains SATA drivers for the Linux kernel.

Package: scsi-common-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 704
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
 This package contains very common SCSI drivers for the Linux kernel.

Package: scsi-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
 This package contains uncommon SCSI drivers for the Linux kernel.
 This includes SCSI RAID drivers, and some of the less common SCSI
 controllers.

Package: scsi-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1020
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Provides: scsi-modules
Description: SCSI drivers
 This package contains SCSI drivers for the Linux kernel.

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: usb-storage-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Provides: usb-storage-modules
Description: USB storage support
 This package contains the USB storage driver for the Linux kernel.

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: xfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
 This package contains the XFS filesystem module for the Linux kernel.

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This minimal package includes the shared library
 for use with the Debian installer.

Package: qnx4-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
 This package contains the QNX4 filesystem module for the Linux kernel.


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-k7
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

installation-report depends on no packages.

Versions of packages installation-report recommends:
ii  pciutils                  1:2.2.4~pre4-1 Linux PCI Utilities
ii  reportbug                 3.31           reports bugs in the Debian distrib

-- no debconf information

Attachment: pgpBr3IpCYHnP.pgp
Description: PGP signature


--- End Message ---
--- Begin Message ---
Hello!

On Sat, 06 Jan 2007 05:14:22 +0100, Frans Pop wrote:
> On Friday 05 January 2007 20:21, Luca Capello wrote:
>>   Then start the lvmcfg module (either directly from partman or
>>   from the debian-installer's main menu) and [...]
>
> The current development version of the manual for Etch [1] no longer
> has that. The version currently in testing will soon be updated.

Etch is out since a while, closing the bug :-D

Thx, bye,
Gismo / Luca

--- End Message ---

Reply to: