Bug#423192: installation-report: segfault after "Cleaning up" step
Package: installation-reports
Version: 2.29
Severity: normal
Hello,
here the report for an installation on a quite old machine. I
experienced a segfault after the "Cleaning up" step, read below.
Thx, bye,
Gismo / Luca
-- Package-specific info:
Boot method: CD
Image version: etch-4.0r0 multi-arch (i386/amd64/powerpc) netinst-1
Date: 2007/05/06 around 14:00+0200
Machine:
motherboard ASUS P2B-F, BIOS 1014b003
processor Intel Pentium-II (Klamath) 266MHz
RAM installed 384MB
HD Seagate Barracuda 7200.10 ST3240620A (IDE 250GB)
Video ELSA GLoria Synergy+ AGP
Partitions:
luca@baloo:~$ /sbin/fdisk -l /dev/hda
Disk /dev/hda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 24 192748+ 83 Linux
/dev/hda2 25 30401 244003252+ 83 Linux
luca@baloo:~$
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
The installation went smoothly until the "Cleaning up" step and then
it gave a segfault loop (i.e., d-i tried in a loop to continue, but
always producing a segfault). I think the problem was grub, because
manually starting "grub-installer" gave a segfault, too.
Unfortunately, I halted the machine before saving the syslog...
Then, I re-installed the machine with the same procedure and this time
all was OK, with no errors at all.
I think we can quietly close this bug, as I cannot reproduce it.
BTW1, except /boot all the rest is on an encrypted LVM.
BTW2, X/GNOME was correctly configured without any manual setup.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux baloo 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
lspci -nn: 00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
lspci -nn: 00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
lspci -nn: 00:04.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
lspci -nn: 00:04.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
lspci -nn: 00:0a.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-724F [DS-1 Audio Controller] [1073:000d] (rev 03)
lspci -nn: 00:0b.0 Communication controller [0780]: Agere Systems F-1156IV WinModem (V90, 56KFlex) [11c1:044a] (rev 01)
lspci -nn: 00:0c.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 01)
lspci -nn: 01:00.0 VGA compatible controller [0300]: Texas Instruments TVP4020 [Permedia 2] [104c:3d07] (rev 11)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
lspci -vnn: Flags: bus master, medium devsel, latency 64
lspci -vnn: Memory at e4000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Capabilities: [a0] AGP version 1.0
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -vnn: Memory behind bridge: e1000000-e2efffff
lspci -vnn: Prefetchable memory behind bridge: e3f00000-e3ffffff
lspci -vnn:
lspci -vnn: 00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
lspci -vnn: Flags: bus master, medium devsel, latency 32
lspci -vnn: I/O ports at d800 [size=16]
lspci -vnn:
lspci -vnn: 00:04.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 9
lspci -vnn: I/O ports at d400 [size=32]
lspci -vnn:
lspci -vnn: 00:04.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
lspci -vnn: Flags: medium devsel, IRQ 9
lspci -vnn:
lspci -vnn: 00:0a.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-724F [DS-1 Audio Controller] [1073:000d] (rev 03)
lspci -vnn: Subsystem: Yamaha Corporation YMF-724F [DS-1 Audio Controller] [1073:000d]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 5
lspci -vnn: Memory at e0800000 (32-bit, non-prefetchable) [size=32K]
lspci -vnn: Capabilities: [50] Power Management version 1
lspci -vnn:
lspci -vnn: 00:0b.0 Communication controller [0780]: Agere Systems F-1156IV WinModem (V90, 56KFlex) [11c1:044a] (rev 01)
lspci -vnn: Subsystem: Askey Computer Corp. Unknown device [144f:1005]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 10
lspci -vnn: Memory at e0000000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: I/O ports at d000 [size=8]
lspci -vnn: I/O ports at b800 [size=256]
lspci -vnn: Capabilities: [f8] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0c.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 01)
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 11
lspci -vnn: Memory at e3000000 (32-bit, prefetchable) [size=4K]
lspci -vnn: I/O ports at b400 [size=32]
lspci -vnn: Memory at df800000 (32-bit, non-prefetchable) [size=1M]
lspci -vnn: [virtual] Expansion ROM at 20000000 [disabled] [size=1M]
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: Texas Instruments TVP4020 [Permedia 2] [104c:3d07] (rev 11)
lspci -vnn: Subsystem: Elsa AG Unknown device [1048:0a35]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
lspci -vnn: Memory at e2000000 (32-bit, non-prefetchable) [size=128K]
lspci -vnn: Memory at e1800000 (32-bit, non-prefetchable) [size=8M]
lspci -vnn: Memory at e1000000 (32-bit, non-prefetchable) [size=8M]
lspci -vnn: Expansion ROM at e3ff0000 [disabled] [size=64K]
lspci -vnn: Capabilities: [4c] Power Management version 1
lspci -vnn: Capabilities: [40] AGP version 1.0
lspci -vnn:
modulemap: 8086:7111 piix
modulemap: 8086:7112 uhci_hcd
modulemap: 8086:1229 e100
lsmod: Module Size Used by
lsmod: sd_mod 18832 0
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: sha256 11136 0
lsmod: aes 28224 2
lsmod: dm_crypt 10888 1
lsmod: dm_mod 48952 14 dm_crypt
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 5
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: e100 32008 0
lsmod: mii 5376 1 e100
lsmod: nls_iso8859_1 4096 0
lsmod: isofs 31544 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: usb_storage 70848 0
lsmod: scsi_mod 121352 2 sd_mod,usb_storage
lsmod: vga16fb 11148 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: ide_disk 14720 3
lsmod: generic 5380 0 [permanent]
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: floppy 51748 0
lsmod: uhci_hcd 19980 0
lsmod: usbcore 108676 6 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd
lsmod: piix 9092 0 [permanent]
lsmod: ide_core 107248 31 ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,generic,piix
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 193488 408 193080 0% /dev
df: tmpfs 193488 408 193080 0% /dev
df: tmpfs 193488 408 193080 0% /.dev
df: /dev/mapper/vgbaloo-lvroot 10321208 2335856 7461064 24% /target
df: /dev/ide/host0/bus0/target0/lun0/part1 186663 12840 164186 7% /target/boot
df: /dev/mapper/vgbaloo-lvhome 10321208 154252 9642668 2% /target/home
df: /dev/mapper/vgbaloo-lvbackup 61927420 184272 58597420 0% /target/mnt/backup
df: /dev/mapper/vgbaloo-lvmusic 156567420 192072 148422148 0% /target/mnt/music
free: total used free shared buffers
free: Mem: 386980 368316 18664 0 30476
free: Swap: 1048568 404 1048164
free: Total: 1435548 368720 1066828
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 3
/proc/cpuinfo: model name : Pentium II (Klamath)
/proc/cpuinfo: stepping : 4
/proc/cpuinfo: cpu MHz : 267.287
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov mmx
/proc/cpuinfo: bogomips : 535.16
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0294-0297 : pnp 00:02
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: b400-b41f : 0000:00:0c.0
/proc/ioports: b400-b41f : e100
/proc/ioports: b800-b8ff : 0000:00:0b.0
/proc/ioports: d000-d007 : 0000:00:0b.0
/proc/ioports: d400-d41f : 0000:00:04.2
/proc/ioports: d400-d41f : uhci_hcd
/proc/ioports: d800-d80f : 0000:00:04.1
/proc/ioports: d800-d807 : ide0
/proc/ioports: d808-d80f : ide1
/proc/ioports: e400-e43f : 0000:00:04.3
/proc/ioports: e400-e43f : motherboard
/proc/ioports: e400-e403 : ACPI PM1a_EVT_BLK
/proc/ioports: e404-e405 : ACPI PM1a_CNT_BLK
/proc/ioports: e408-e40b : ACPI PM_TMR
/proc/ioports: e40c-e40f : ACPI GPE0_BLK
/proc/ioports: e410-e415 : ACPI CPU throttle
/proc/ioports: e800-e80f : 0000:00:04.3
/proc/ioports: e800-e80f : motherboard
/proc/ioports: e800-e80f : pnp 00:02
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-17ffcfff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 17ffd000-17ffefff : ACPI Tables
/proc/iomem: 17fff000-17ffffff : ACPI Non-volatile Storage
/proc/iomem: 20000000-200fffff : 0000:00:0c.0
/proc/iomem: df800000-df8fffff : 0000:00:0c.0
/proc/iomem: df800000-df8fffff : e100
/proc/iomem: e0000000-e00000ff : 0000:00:0b.0
/proc/iomem: e0800000-e0807fff : 0000:00:0a.0
/proc/iomem: e1000000-e2efffff : PCI Bus #01
/proc/iomem: e1000000-e17fffff : 0000:01:00.0
/proc/iomem: e1800000-e1ffffff : 0000:01:00.0
/proc/iomem: e2000000-e201ffff : 0000:01:00.0
/proc/iomem: e3000000-e3000fff : 0000:00:0c.0
/proc/iomem: e3000000-e3000fff : e100
/proc/iomem: e3f00000-e3ffffff : PCI Bus #01
/proc/iomem: e3ff0000-e3ffffff : 0000:01:00.0
/proc/iomem: e4000000-e7ffffff : 0000:00:00.0
/proc/iomem: ffff0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 19423543 XT-PIC timer
/proc/interrupts: 1: 2834 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 6: 12 XT-PIC floppy
/proc/interrupts: 7: 1 XT-PIC parport0
/proc/interrupts: 9: 0 XT-PIC acpi, uhci_hcd:usb1
/proc/interrupts: 11: 2372062 XT-PIC eth0
/proc/interrupts: 14: 8011723 XT-PIC ide0
/proc/interrupts: 15: 4290 XT-PIC ide1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 386980 kB
/proc/meminfo: MemFree: 18664 kB
/proc/meminfo: Buffers: 30476 kB
/proc/meminfo: Cached: 286428 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 176700 kB
/proc/meminfo: Inactive: 161200 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 386980 kB
/proc/meminfo: LowFree: 18664 kB
/proc/meminfo: SwapTotal: 1048568 kB
/proc/meminfo: SwapFree: 1048164 kB
/proc/meminfo: Dirty: 1352 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 21032 kB
/proc/meminfo: Mapped: 2096 kB
/proc/meminfo: Slab: 24080 kB
/proc/meminfo: PageTables: 236 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 1242056 kB
/proc/meminfo: Committed_AS: 25200 kB
/proc/meminfo: VmallocTotal: 646864 kB
/proc/meminfo: VmallocUsed: 5308 kB
/proc/meminfo: VmallocChunk: 641308 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: Legacy DMI 2.0 present.
dmidecode: 34 structures occupying 1103 bytes.
dmidecode: Table at 0x000F598A.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 18 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Award Software, Inc.
dmidecode: Version: ASUS P2B-F ACPI BIOS Revision 1014 Beta 003
dmidecode: Release Date: 08/01/02
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 256 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 8 bytes
dmidecode: System Information
dmidecode: Manufacturer: System Manufacturer
dmidecode: Product Name: System Name
dmidecode: Version: System Version
dmidecode: Serial Number: SYS-1234567890
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: ASUSTeK Computer INC.
dmidecode: Product Name: P2B-F
dmidecode: Version: REV 1.xx
dmidecode: Serial Number: MB-1234567890
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 9 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Chassis Manufacture
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version: Chassis Version
dmidecode: Serial Number: Chassis Serial Number
dmidecode: Asset Tag: Asset-1234567890
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 26 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: SLOT 1
dmidecode: Type: Central Processor
dmidecode: Family: Pentium Pro
dmidecode: Manufacturer: Intel Corporation
dmidecode: ID: 34 06 00 00 FF F9 80 00
dmidecode: Signature: Type 0, Family 6, Model 3, Stepping 4
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: MMX (MMX technology supported)
dmidecode: Version: Intel Pentium II Processor
dmidecode: Voltage: 2.9 V
dmidecode: External Clock: 66 MHz
dmidecode: Max Speed: 700 MHz
dmidecode: Current Speed: 266 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Slot 1
dmidecode:
dmidecode: Handle 0x0005, DMI type 5, 31 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: None
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 256 MB
dmidecode: Maximum Total Memory Size: 2048 MB
dmidecode: Supported Speeds:
dmidecode: 70 ns
dmidecode: 60 ns
dmidecode: 50 ns
dmidecode: Supported Memory Types:
dmidecode: EDO
dmidecode: Parity
dmidecode: DIMM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 8
dmidecode: 0x0006
dmidecode: 0x0007
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: 0x000A
dmidecode: 0x000B
dmidecode: 0x000C
dmidecode: 0x000D
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM1-2
dmidecode: Bank Connections: 0 1
dmidecode: Current Speed: 70 ns
dmidecode: Type: Other DIMM
dmidecode: Installed Size: 128 MB (Double-bank Connection)
dmidecode: Enabled Size: 128 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM2-1
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: 70 ns
dmidecode: Type: DIMM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM2-2
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: 70 ns
dmidecode: Type: DIMM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM3-1
dmidecode: Bank Connections: 4 5
dmidecode: Current Speed: 70 ns
dmidecode: Type: Other DIMM
dmidecode: Installed Size: 64 MB (Single-bank Connection)
dmidecode: Enabled Size: 64 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM3-2
dmidecode: Bank Connections: 4 5
dmidecode: Current Speed: 70 ns
dmidecode: Type: DIMM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000C, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM4-1
dmidecode: Bank Connections: 6 7
dmidecode: Current Speed: 70 ns
dmidecode: Type: Other DIMM
dmidecode: Installed Size: 64 MB (Single-bank Connection)
dmidecode: Enabled Size: 64 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000D, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM4-2
dmidecode: Bank Connections: 6 7
dmidecode: Current Speed: 70 ns
dmidecode: Type: DIMM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000E, DMI type 7, 15 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types: None
dmidecode: Installed SRAM Type: None
dmidecode:
dmidecode: Handle 0x000F, DMI type 7, 15 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM1
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator: COM A
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM2
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator: COM B
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRINTER
dmidecode: Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
dmidecode: External Reference Designator: LPT
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: KEY
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: KEYBOARD
dmidecode: External Connector Type: Micro DIN
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS2MOUSE
dmidecode: Internal Connector Type: Proprietary
dmidecode: External Reference Designator: PS/2 Mouse
dmidecode: External Connector Type: Micro DIN
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRIMARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: IDE-1
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SECONDARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: IDE-2
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FLOPPY
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: FLOPPY
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0018, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 12
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0019, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 11
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x001A, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 10
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x001B, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot4
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 9
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x001C, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot5
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 13
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: Opening is shared
dmidecode:
dmidecode: Handle 0x001D, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: ISA Slot1
dmidecode: Type: 16-bit ISA
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: Opening is shared
dmidecode:
dmidecode: Handle 0x001E, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: ISA Slot2
dmidecode: Type: 16-bit ISA
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x001F, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: OEM String
dmidecode:
dmidecode: Handle 0x0020, DMI type 12, 5 bytes
dmidecode: System Configuration Options
dmidecode: Option 1: System String
dmidecode:
dmidecode: Handle 0x0021, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: ENGLISH
dmidecode: Currently Installed Language: ENGLISH
dmidecode:
dmidecode: Wrong DMI structures count: 34 announced, only 33 decoded.
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support
Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support
Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers
Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers
Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support
Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver
Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules
Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support
Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem
Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308
Description: debian installation image
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-2
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libcrypto0.9.8-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1312
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Version: 0.9.8c-4
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Provides: libssl0.9.8
Description: crypto shared library - udeb
libcrypto shared library.
.
Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libnss-files-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for files - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains the files NSS helper needed for the Debian installer.
Do not install it on a normal system.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-console
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1)
Description: Continue installation remotely using SSH
Installer-Menu-Item: 21
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: openssh-client-udeb
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 320
Maintainer: Matthew Vernon <matthew@debian.org>
Version: 1:4.3p2-9
Depends: libc6 (>= 2.3.6-6), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell client for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the ssh client for use in debian-installer.
Installer-Menu-Item: 999
Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: openssh-server-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Matthew Vernon <matthew@debian.org>
Version: 1:4.3p2-9
Depends: libc6 (>= 2.3.6-6), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell server for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the sshd server for use in debian-installer.
Since it is expected to be used in specialized situations (e.g. S/390
installs with no console), it does not provide any configuration.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 460
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.4+svn26-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: crypto-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-3
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: partman-crypto-dm
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-crypto, crypto-modules, cryptsetup-udeb, cdebconf-newt-entropy (>= 0.3)
Description: Add to partman support for dm-crypt encryption
Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
Reply to: