[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#417164: marked as done (installation-report: Portege 3010ct)

Your message dated Mon, 09 Apr 2007 18:08:45 +0200
with message-id <200704091808.46061.elendil@planet.nl>
and subject line Fwd: Re: Bug#417164: installation-report: Portege 3010ct
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: installation-reports

Boot method: floppy
Image version: 2007-04-01 yy-mm-dd
Date: 2007-04-01 19:00

Machine: Toshiba Portege 3010ct
Processor: MMX 266Mhz
Memory: 64MB
Partitions: -

Output of lspci and lspci -n:

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [E]
Config network:         [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]


My PCMCIA-networkcard: Xircom 10/100 + 56
Problem comes during the detecting of the networkhardware.
The last displayed message befor the system froze was:
"Loading module 'yenta_socket' for 'Toschiba America Info Systems ToPIC97'...".
I have no idea to fix the problem. If you need more informations about my notebook, send me questions.

--- End Message ---
--- Begin Message ---
Thank you for following up. Sending this information to the BTS too so 
others can find it and closing your report.


----------  Forwarded Message  ----------
Subject: Re: Bug#417164: installation-report: Portege 3010ct
Date: Monday 09 April 2007 17:38
From: Theodor van Nahl <theodor.van.nahl@anna-sophianeum.net>
To: Frans Pop <elendil@planet.nl>

Hello Frans Pop,

I was able to fix the problem with chancing a BIOS-option.
It seemed to be a typical problem on toshiba's portege 3010ct.
"I set the BIOS to configure the controllers as standard PCIC-Compatible
 controllers."-Source: http://www.gweep.net/~sfoskett/linux/p3010-3.html

The guide is not working with sarge, but these option helped me to
 configure my laptop. After this chancing i was able to install debian
 sarge with the network-installer, started out of win98 with the

Thank you for sending mail and interesting about my problem ;)

--- End Message ---

Reply to: