Bug#414609: D-I RC2 image powerpc - qualified success
Package: installation-reports
Boot method: Netinstall
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso
Date: 2007-03-12 18:00
Machine: PowerMac G4
Processor: 800MHz
Memory: 768Mb
Partitions:
/dev/hda
# type name length base
# ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @
1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 1954 @
64 (977.0k) NewWorld bootblock
/dev/hda3 Apple_UNIX_SVR2 untitled 13671876 @
2018 ( 6.5G) Linux native
/dev/hda4 Apple_UNIX_SVR2 swap 4484376 @
13673894 ( 2.1G) Linux swap
/dev/hda5 Apple_UNIX_SVR2 untitled 9787393 @
18158270 ( 4.7G) Linux native
/dev/hda6 Apple_Bootstrap testing 8203126 @
27945663 ( 3.9G) NewWorld bootblock
/dev/hda7 Apple_UNIX_SVR2 untitled 83954411 @
36148789 ( 40.0G) Linux native
Block size=512, Number of Blocks=120103200
DeviceType=0x0, DeviceId=0x0
Installation on /dev/hda6
Output of lspci -nn :
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 AGP
[106b:002d]
0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc
Radeon RV200 QW [Radeon 7500] [1002:5157]
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 PCI
[106b:002e]
0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo Mac I/O
[106b:0022] (rev 03)
0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB
[106b:0019]0001:10:19.0 USB Controller [0c03]: Apple Computer Inc.
KeyLargo USB [106b:0019]0002:20:0b.0 Host bridge [0600]: Apple Computer
Inc. UniNorth 1.5 Internal PCI [106b:002f]
0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323
[11c1:5811]
0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth
GMAC (Sun GEM) [106b:0021] (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [E]
Install boot loader: [ ]
Overall install: [O]
Comments/Problems:
All was fine until 'Select and install software'. I'd selected Desktop
in Tasksel and it downloaded c.655Mb and seemed to be installing
eveything OK; however, when I next looked at it, there was the red
screen advising me the install had failed.
I tried again (still selecting Desktop) and it failed again. Third time
I didn't attempt to install anything via tasksel and the intall
completed OK.
I didn't install yaboot (it was already installed via another system).
Reboot was fine and I've managed to install ssh using aptitude. Minor
point: the base install version of ssh-client is later than the
ssh-server version; I accepted the downgrade to the previous version.
I've tried running tasksel again and got:
Use of uninitialized value in concatenation (.) or string at
/usr/bin/tasksel line 345.
Use of uninitialized value in concatenation (.) or string at
/usr/bin/tasksel line 345.
Use of uninitialized value in concatenation (.) or string at
/usr/bin/tasksel line 345.
Use of uninitialized value in concatenation (.) or string at
/usr/bin/tasksel line 345.
tasksel: aptitude failed (255)
Regards
Clive
--
www.clivemenzies.co.uk ...
...strategies for business
Reply to: