Bug#412907: installation-reports: Acer Travelmate 200DX with daily build of Etch installer
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: Etch daily installer downloaded 20070228
Date: 2007-02-28
Machine: Acer Travelmate 200DX
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda1 ext3 4546016 2548860 1766224 60% /
tmpfs tmpfs 128484 0 128484 0% /lib/init/rw
udev tmpfs 10240 52 10188 1% /dev
tmpfs tmpfs 128484 0 128484 0% /dev/shm
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Installation was netinst from CD, over a PC Wireless card (Lucent
Orinoco).
The installer initially hung the machine as it hit Debian
bug #333831, this was worked around with 'linux acpi=off'
as the boot instruction. After installation, GRUB run the kernel with
ACPI=OFF, so the problem is not an issue after installing Etch.
I picked default options all the way though getting;
Desktop, Laptop, Standard in tasksel.
On booting the video, sounds, and network card are all correctly
detected and work well.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
NetworkManager in the GNOME desktop claims that there is no network
connection present, even though the Orinoco card was correctly detected,
and DHCP completed normally to configure a working Internet connection.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070228-03:53)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux ace 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: ALi Corporation M1621 [10b9:1621] (rev 05)
lspci -nn: 00:01.0 PCI bridge [0604]: ALi Corporation PCI to AGP Controller [10b9:5247] (rev 01)
lspci -nn: 00:06.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 01)
lspci -nn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -nn: 00:10.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3)
lspci -nn: 00:11.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
lspci -nn: 00:13.0 CardBus bridge [0607]: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller [1217:6933] (rev 01)
lspci -nn: 00:13.1 CardBus bridge [0607]: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller [1217:6933] (rev 01)
lspci -nn: 00:14.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03)
lspci -nn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility P/M AGP 2x [1002:4c4d] (rev 64)
lspci -vnn: 00:00.0 Host bridge [0600]: ALi Corporation M1621 [10b9:1621] (rev 05)
lspci -vnn: Flags: bus master, slow devsel, latency 0
lspci -vnn: Memory at e0000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Capabilities: [b0] AGP version 1.0
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: ALi Corporation PCI to AGP Controller [10b9:5247] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -vnn: I/O behind bridge: 00007000-00007fff
lspci -vnn: Memory behind bridge: 80100000-820fffff
lspci -vnn:
lspci -vnn: 00:06.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 01)
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1010]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 10
lspci -vnn: I/O ports at 8000 [size=256]
lspci -vnn: Memory at 82200000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1010]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: Capabilities: [a0] Power Management version 1
lspci -vnn:
lspci -vnn: 00:10.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3) (prog-if fa)
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1010]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 15
lspci -vnn: I/O ports at 6050 [size=16]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn:
lspci -vnn: 00:11.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1010]
lspci -vnn: Flags: medium devsel
lspci -vnn:
lspci -vnn: 00:13.0 CardBus bridge [0607]: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller [1217:6933] (rev 01)
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1010]
lspci -vnn: Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
lspci -vnn: Memory at 28000000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
lspci -vnn: Memory window 0: 20000000-21fff000 (prefetchable)
lspci -vnn: Memory window 1: 22000000-23fff000
lspci -vnn: I/O window 0: 00001400-000014ff
lspci -vnn: I/O window 1: 00001800-000018ff
lspci -vnn: 16-bit legacy interface ports at 0001
lspci -vnn:
lspci -vnn: 00:13.1 CardBus bridge [0607]: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller [1217:6933] (rev 01)
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1010]
lspci -vnn: Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
lspci -vnn: Memory at 28001000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
lspci -vnn: Memory window 0: 24000000-25fff000 (prefetchable)
lspci -vnn: Memory window 1: 26000000-27fff000
lspci -vnn: I/O window 0: 00001c00-00001cff
lspci -vnn: I/O window 1: 00002000-000020ff
lspci -vnn: 16-bit legacy interface ports at 0001
lspci -vnn:
lspci -vnn: 00:14.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10)
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1010]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 11
lspci -vnn: Memory at 82400000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility P/M AGP 2x [1002:4c4d] (rev 64)
lspci -vnn: Subsystem: Acer Incorporated [ALI] Unknown device [1025:1011]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
lspci -vnn: Memory at 81000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: I/O ports at 7000 [size=256]
lspci -vnn: Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Expansion ROM at 80120000 [disabled] [size=128K]
lspci -vnn: Capabilities: [50] AGP version 1.0
lspci -vnn: Capabilities: [5c] Power Management version 1
lspci -vnn:
modulemap: 10b9:5229 alim15x3
modulemap: 1217:6933 yenta_socket
modulemap: 1217:6933 yenta_socket
modulemap: 10b9:5237 ohci_hcd
lsmod: Module Size Used by
lsmod: sd_mod 18832 0
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 1
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: orinoco_cs 15492 1
lsmod: orinoco 34580 1 orinoco_cs
lsmod: hermes 7040 2 orinoco_cs,orinoco
lsmod: nls_iso8859_1 4096 0
lsmod: isofs 31544 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: usb_storage 70848 0
lsmod: scsi_mod 121352 2 sd_mod,usb_storage
lsmod: vga16fb 11148 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: processor 23212 0
lsmod: pcmcia 33468 1 orinoco_cs
lsmod: firmware_class 9216 1 pcmcia
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: ide_disk 14720 3
lsmod: floppy 51748 0
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: yenta_socket 24332 4
lsmod: rsrc_nonstatic 11648 1 yenta_socket
lsmod: pcmcia_core 35856 4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
lsmod: ohci_hcd 17284 0
lsmod: usbcore 108676 6 usb_storage,usbserial,usbhid,usbkbd,ohci_hcd
lsmod: alim15x3 11020 0 [permanent]
lsmod: generic 5380 0 [permanent]
lsmod: ide_core 107248 31 ide_generic,pdc202xx_new,aec62xx,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,alim15x3,generic
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 128540 408 128132 0% /dev
df: tmpfs 128540 408 128132 0% /dev
df: tmpfs 128540 408 128132 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 4546016 2529024 1786060 59% /target
free: total used free shared buffers
free: Mem: 257080 238748 18332 0 20948
free: Swap: 265032 404 264628
free: Total: 522112 239152 282960
cardctl status: Socket 0:
cardctl status: no card
cardctl status: Socket 1:
cardctl status: 5.0V 16-bit PC Card
cardctl status: Subdevice 0 (function 0) bound to driver "orinoco_cs"
cardctl ident: Socket 0:
cardctl ident: no product info available
cardctl ident: Socket 1:
cardctl ident: product info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
cardctl ident: manfid: 0x0156, 0x0002
cardctl ident: function: 6 (network)
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 8
/proc/cpuinfo: model name : Celeron (Coppermine)
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 547.153
/proc/cpuinfo: cache size : 128 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
/proc/cpuinfo: bogomips : 1095.22
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0100-013f : pcmcia_socket1
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1060-106f : pnp 00:08
/proc/ioports: 1400-14ff : PCI CardBus #02
/proc/ioports: 1800-18ff : PCI CardBus #02
/proc/ioports: 1c00-1cff : PCI CardBus #06
/proc/ioports: 2000-20ff : PCI CardBus #06
/proc/ioports: 6050-605f : 0000:00:10.0
/proc/ioports: 6050-6057 : ide0
/proc/ioports: 6058-605f : ide1
/proc/ioports: 7000-7fff : PCI Bus #01
/proc/ioports: 7000-70ff : 0000:01:00.0
/proc/ioports: 8000-80ff : 0000:00:06.0
/proc/ioports: f100-f13f : 0000:00:11.0
/proc/ioports: f100-f13f : pnp 00:08
/proc/ioports: f140-f15f : 0000:00:11.0
/proc/ioports: f140-f15f : pnp 00:08
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cffff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-0ffeffff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 0fff0000-0fff7fff : ACPI Tables
/proc/iomem: 0fff8000-0fffffff : ACPI Non-volatile Storage
/proc/iomem: 20000000-21ffffff : PCI CardBus #02
/proc/iomem: 22000000-23ffffff : PCI CardBus #02
/proc/iomem: 24000000-25ffffff : PCI CardBus #06
/proc/iomem: 26000000-27ffffff : PCI CardBus #06
/proc/iomem: 28000000-28000fff : 0000:00:13.0
/proc/iomem: 28000000-28000fff : yenta_socket
/proc/iomem: 28001000-28001fff : 0000:00:13.1
/proc/iomem: 28001000-28001fff : yenta_socket
/proc/iomem: 80100000-820fffff : PCI Bus #01
/proc/iomem: 80100000-80100fff : 0000:01:00.0
/proc/iomem: 80120000-8013ffff : 0000:01:00.0
/proc/iomem: 81000000-81ffffff : 0000:01:00.0
/proc/iomem: 82200000-82200fff : 0000:00:06.0
/proc/iomem: 82400000-82400fff : 0000:00:14.0
/proc/iomem: 82400000-82400fff : ohci_hcd
/proc/iomem: a0000000-a0000fff : pcmcia_socket1
/proc/iomem: e0000000-e3ffffff : 0000:00:00.0
/proc/iomem: ffff0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1061135 XT-PIC timer
/proc/interrupts: 1: 304 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 3: 605097 XT-PIC pcmcia1.0
/proc/interrupts: 6: 8 XT-PIC floppy
/proc/interrupts: 7: 0 XT-PIC parport0
/proc/interrupts: 11: 10 XT-PIC ohci_hcd:usb1, yenta, yenta
/proc/interrupts: 14: 138831 XT-PIC ide0
/proc/interrupts: 15: 2855 XT-PIC ide1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 257080 kB
/proc/meminfo: MemFree: 18332 kB
/proc/meminfo: Buffers: 20948 kB
/proc/meminfo: Cached: 171900 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 140080 kB
/proc/meminfo: Inactive: 78076 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 257080 kB
/proc/meminfo: LowFree: 18332 kB
/proc/meminfo: SwapTotal: 265032 kB
/proc/meminfo: SwapFree: 264628 kB
/proc/meminfo: Dirty: 1080 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 20572 kB
/proc/meminfo: Mapped: 1844 kB
/proc/meminfo: Slab: 15908 kB
/proc/meminfo: PageTables: 232 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 393572 kB
/proc/meminfo: Committed_AS: 25120 kB
/proc/meminfo: VmallocTotal: 777936 kB
/proc/meminfo: VmallocUsed: 4332 kB
/proc/meminfo: VmallocChunk: 773008 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 37 structures occupying 1165 bytes.
dmidecode: Table at 0x000F8280.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 19 bytes
dmidecode: BIOS Information
dmidecode: Vendor: ACER
dmidecode: Version: V3.3 R01-A3t-EN
dmidecode: Release Date: 07/23/2001
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PC Card (PCMCIA) is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
dmidecode: Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: AGP is supported
dmidecode: Smart battery is supported
dmidecode:
dmidecode: Handle 0x0100, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Acer
dmidecode: Product Name: TravelMate 200
dmidecode: Version: -1
dmidecode: Serial Number: 9144G0100U03800D95T
dmidecode: UUID: 1A1B9C00-8F28-11D4-BC3E-B2A430A13765
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0200, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Acer
dmidecode: Product Name: ALi Alladin Pro
dmidecode: Version: -1
dmidecode: Serial Number: 9144G0100U03800D95T
dmidecode:
dmidecode: Handle 0x0300, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Acer
dmidecode: Type: Notebook
dmidecode: Lock: Not Present
dmidecode: Version: -1
dmidecode: Serial Number: 9144G0100U03800D95T
dmidecode: Asset Tag:
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode:
dmidecode: Handle 0x0400, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: U11
dmidecode: Type: Central Processor
dmidecode: Family: Celeron
dmidecode: Manufacturer: Intel
dmidecode: ID: 83 06 00 00 FF F9 83 03
dmidecode: Signature: Type 0, Family 6, Model 8, Stepping 3
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: Version: Celeron(TM)
dmidecode: Voltage: 1.6 V
dmidecode: External Clock: 100 MHz
dmidecode: Max Speed: 550 MHz
dmidecode: Current Speed: 550 MHz
dmidecode: Status: Unpopulated
dmidecode: Upgrade: Daughter Board
dmidecode: L1 Cache Handle: 0x0700
dmidecode: L2 Cache Handle: 0x0701
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0500, DMI type 5, 20 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: None
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: Unknown
dmidecode: Current Interleave: Unknown
dmidecode: Maximum Memory Module Size: 256 MB
dmidecode: Maximum Total Memory Size: 512 MB
dmidecode: Supported Speeds:
dmidecode: Unknown
dmidecode: Supported Memory Types:
dmidecode: DIMM
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 2
dmidecode: 0x0600
dmidecode: 0x0601
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0600, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DM2
dmidecode: Bank Connections: 0 1
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 128 MB (Single-bank Connection)
dmidecode: Enabled Size: 128 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0601, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: CN22
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 128 MB (Single-bank Connection)
dmidecode: Enabled Size: 128 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0700, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: U11
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Through
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unified
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0701, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: U37
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Through
dmidecode: Location: External
dmidecode: Installed Size: 128 KB
dmidecode: Maximum Size: 128 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0800, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Serial 1
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0801, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: U1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Infrared
dmidecode: External Connector Type: Infrared
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0802, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN3
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Parallel
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP
dmidecode:
dmidecode: Handle 0x0803, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: KEYBOARD
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0804, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: MOUSE
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0805, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN5
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0806, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN6
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0807, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN26
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: MODEM
dmidecode: External Connector Type: RJ-11
dmidecode: Port Type: Modem Port
dmidecode:
dmidecode: Handle 0x0808, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: U49
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LAN
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0809, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN24
dmidecode: Internal Connector Type: Proprietary
dmidecode: External Reference Designator: LINE-IN JACK
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x080A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN24
dmidecode: Internal Connector Type: Proprietary
dmidecode: External Reference Designator: HEADPHONE-OUT JACK
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x080B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN24
dmidecode: Internal Connector Type: Proprietary
dmidecode: External Reference Designator: MICROPHONE-IN JACK
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x080C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: EXTERNAL DISPLAY
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x0900, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: CN13A
dmidecode: Type: 32-bit PC Card (PCMCIA)
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: Adapter 0, Socket 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0901, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: CN13B
dmidecode: Type: 32-bit PC Card (PCMCIA)
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: Adapter 0, Socket 2
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0A00, DMI type 10, 8 bytes
dmidecode: On Board Device 1 Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: ATI Rage Mobility
dmidecode: On Board Device 2 Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description: Ali AC-Link M5451
dmidecode:
dmidecode: Handle 0x0D00, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: en|US|iso8859-1
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x1000, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 256 MB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 2
dmidecode:
dmidecode: Handle 0x1100, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 128 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: DM2
dmidecode: Bank Locator: BANK 0
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1101, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 128 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: CN22
dmidecode: Bank Locator: BANK 1
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x1300, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x00007FFFFFF
dmidecode: Range Size: 128 MB
dmidecode: Physical Array Handle: 0x1000
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x1400, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x00007FFFFFF
dmidecode: Range Size: 128 MB
dmidecode: Physical Device Handle: 0x1100
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 8
dmidecode:
dmidecode: Handle 0x1401, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00008000000
dmidecode: Ending Address: 0x0000FFFFFFF
dmidecode: Range Size: 128 MB
dmidecode: Physical Device Handle: 0x1101
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 8
dmidecode:
dmidecode: Handle 0x1500, DMI type 21, 7 bytes
dmidecode: Built-in Pointing Device
dmidecode: Type: Touch Pad
dmidecode: Interface: PS/2
dmidecode: Buttons: 4
dmidecode:
dmidecode: Handle 0x2000, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: <OUT OF SPEC>
dmidecode:
dmidecode: Handle 0x7F00, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
dmidecode: Handle 0x8000, DMI type 128, 6 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 80 06 00 80 00 00
dmidecode:
dmidecode: Wrong DMI structures length: 1165 bytes announced, structures occupy 1159 bytes.
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support
Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.17
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support
Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers
Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers
Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support
Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-2
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.3-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver
Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-6
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules
Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support
Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem
Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070228-03:54
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.75
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.14
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 72
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.12-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 67
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 104
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 52
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 51
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 240
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.18-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Reply to: