Bug#401524: installation-report: on sparc64 1st partition not useable for raid and X config wrong/not working
Subject: installation-report: on sparc64 1st partition not useable for raid and X config wrong/not working
Package: installation-reports
Version: 2.23
Severity: normal
*** Please type your report below this line ***
Two things went wrong during install:
1) I was unable to use sda1 or sdb1 for software raid (option not offered)
2) The X server config was configured with 24bit depth but the suncg6 card
supports 8 bit only. Unfortunatly the driver fails to initialize the
card (XFree86 on sparc32 worked find with the same card) in a way that
the screen switches and the cursor goes blue from white but nothing
else happens.
-- Package-specific info:
Boot method: network
Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-sparc/rc1/images/sparc64/netboot/2.6/boot.img
Date: <Date and time of the install>
Machine: SUN Ultra 1
Partitions:
Disk /dev/sda (Sun disk label): 255 heads, 63 sectors, 2202 cylinders
Units = cylinders of 16065 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sda1 0 16 128520 1 Boot
/dev/sda2 16 138 979965 fd Linux raid autodetect
/dev/sda3 0 2202 17687565 5 Whole disk
/dev/sda4 138 2202 16579080 fd Linux raid autodetect
Disk /dev/sdb (Sun disk label): 255 heads, 63 sectors, 2202 cylinders
Units = cylinders of 16065 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sdb1 0 16 128520 1 Boot
/dev/sdb2 16 138 979965 fd Linux raid autodetect
/dev/sdb3 0 2202 17687565 5 Whole disk
/dev/sdb4 138 2202 16579080 fd Linux raid autodetect
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [E]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Install went fine expect that the first partition of both disks could not
be used for software raid (as you can see other partitions worked fine).
The option was not offered in the menues.
The X server setup worked well apart from defining 24bit depth while the
cards installed (suncg6) would support 8bit only. In addition the X server
failed to initialize the card correctly meaning that the color of the text
cursor changed but nothing else (It works under sparc32 with Xfree86).
The DHCP server gives a ntp time source out which the installer failed
to pick up (actually no ntp tools were installed at all).
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061102)"
X_INSTALLATION_MEDIUM=netboot-2.6
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux vla10 2.6.17-2-sparc64 #1 Wed Sep 13 10:39:24 PDT 2006 sparc64 unknown
lsmod: Module Size Used by
lsmod: raid5 34240 0
lsmod: xor 4368 1 raid5
lsmod: raid1 24256 2
lsmod: raid0 8192 0
lsmod: md_mod 86816 5 raid5,raid1,raid0
lsmod: xfs 483216 0
lsmod: reiserfs 312448 0
lsmod: jfs 195440 0
lsmod: ext3 151248 3
lsmod: jbd 58344 1 ext3
lsmod: vfat 14464 0
lsmod: fat 56304 1 vfat
lsmod: isofs 44464 0
lsmod: ide_cd 45128 0
lsmod: ide_disk 17536 0
lsmod: ide_generic 1664 0 [permanent]
lsmod: alim15x3 13336 0 [permanent]
lsmod: cmd64x 12152 0 [permanent]
lsmod: cs5520 5632 0 [permanent]
lsmod: cs5530 6080 0 [permanent]
lsmod: cy82c693 5384 0 [permanent]
lsmod: generic 5892 0 [permanent]
lsmod: it821x 9540 0 [permanent]
lsmod: ns87415 5100 0 [permanent]
lsmod: pdc202xx_new 9984 0 [permanent]
lsmod: pdc202xx_old 11648 0 [permanent]
lsmod: serverworks 10512 0 [permanent]
lsmod: siimage 12864 0 [permanent]
lsmod: trm290 5250 0 [permanent]
lsmod: via82cxxx 10372 0 [permanent]
lsmod: sr_mod 19812 0
lsmod: cdrom 41064 2 ide_cd,sr_mod
lsmod: sd_mod 22168 8
lsmod: esp 35488 6
lsmod: scsi_mod 153600 3 sr_mod,sd_mod,esp
lsmod: sunqe 11984 0
lsmod: sunlance 15592 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 517872 920 516952 0% /dev
df: tmpfs 517872 920 516952 0% /dev
df: tmpfs 517872 920 516952 0% /.dev
df: /dev/md/1 16318824 2445328 13044548 16% /target
df: /dev/scsi/host0/bus0/target0/lun0/part1 124443 12801 105216 11% /target/boot
df: /dev/scsi/host0/bus0/target1/lun0/part1 124443 5664 112353 5% /target/boot2
free: total used free shared buffers
free: Mem: 1035752 1014424 21328 0 100864
free: Swap: 979824 920 978904
free: Total: 2015576 1015344 1000232
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 28: pccardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 29: pccardctl: not found
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: cpu : TI UltraSparc I (SpitFire)
/proc/cpuinfo: fpu : UltraSparc I integrated FPU
/proc/cpuinfo: prom : OBP 3.5.0 1997/01/06 17:59
/proc/cpuinfo: type : sun4u
/proc/cpuinfo: ncpus probed : 1
/proc/cpuinfo: ncpus active : 1
/proc/cpuinfo: D$ parity tl1 : 0
/proc/cpuinfo: I$ parity tl1 : 0
/proc/cpuinfo: Cpu0Bogo : 286.33
/proc/cpuinfo: Cpu0ClkTck : 00000000088601c0
/proc/cpuinfo: MMU Type : Spitfire
/proc/ioports: 1ff00010000-1ff0001001f : QE MACE Registers
/proc/ioports: 1ff00014000-1ff0001401f : QE MACE Registers
/proc/ioports: 1ff00018000-1ff0001801f : QE MACE Registers
/proc/ioports: 1ff0001c000-1ff0001c01f : QE MACE Registers
/proc/ioports: 1ff00020000-1ff00020017 : QEC Global Registers
/proc/ioports: 1ff00030000-1ff00030037 : QEC Channel Registers
/proc/ioports: 1ff00034000-1ff00034037 : QEC Channel Registers
/proc/ioports: 1ff00038000-1ff00038037 : QEC Channel Registers
/proc/ioports: 1ff0003c000-1ff0003c037 : QEC Channel Registers
/proc/ioports: 1ff20200000-1ff2020000f : cgsix dac
/proc/ioports: 1ff20300000-1ff20300003 : cgsix fhc
/proc/ioports: 1ff20301000-1ff203019ff : cgsix thc
/proc/ioports: 1ff20700000-1ff20700fff : cgsix fbc
/proc/ioports: 1ff20701000-1ff2070100b : cgsix tec
/proc/ioports: 1ff20800000-1ff20bf7fff : cgsix ram
/proc/ioports: 1ffe8400000-1ffe840000f : dma
/proc/ioports: 1ffe8400010-1ffe840002f : dma
/proc/ioports: 1ffe8800000-1ffe880003f : ESP Registers
/proc/ioports: 1ffe8c00000-1ffe8c00003 : LANCE
/proc/ioports: 1fff1000000-1fff1001fff : Zilog Registers
/proc/ioports: 1fff1100000-1fff1101fff : Zilog Registers
/proc/ioports: 1fff1900000-1fff1900000 : auxiliaryIO
/proc/interrupts: 0: 5334185 timer:dead
/proc/interrupts: 5: 4865318 QuadEther:7c4, LANCE:7e1, ESP SCSI:7e0
/proc/interrupts: 12: 794393 SunZilog:7e8
/proc/interrupts: 15: 0 SYSIO UE:7f4, SYSIO CE:7f5, SYSIO SBUS Error:7f6
/proc/meminfo: MemTotal: 1035752 kB
/proc/meminfo: MemFree: 21312 kB
/proc/meminfo: Buffers: 100864 kB
/proc/meminfo: Cached: 808144 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 448704 kB
/proc/meminfo: Inactive: 478696 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1035752 kB
/proc/meminfo: LowFree: 21312 kB
/proc/meminfo: SwapTotal: 979824 kB
/proc/meminfo: SwapFree: 978904 kB
/proc/meminfo: Dirty: 1984 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 19760 kB
/proc/meminfo: Slab: 78880 kB
/proc/meminfo: CommitLimit: 1497696 kB
/proc/meminfo: Committed_AS: 23320 kB
/proc/meminfo: PageTables: 424 kB
/proc/meminfo: VmallocTotal: 4194304 kB
/proc/meminfo: VmallocUsed: 3232 kB
/proc/meminfo: VmallocChunk: 4191072 kB
/proc/bus/input/devices: I: Bus=0013 Vendor=0010 Product=0005 Version=0100
/proc/bus/input/devices: N: Name="Sun Type 5 keyboard"
/proc/bus/input/devices: P: Phys=zs/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=160003
/proc/bus/input/devices: B: KEY=7ff e09ffffd01cfffff fffffffffffffffe
/proc/bus/input/devices: B: LED=f
/proc/bus/input/devices: B: SND=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0013 Vendor=0002 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Sun Mouse"
/proc/bus/input/devices: P: Phys=zs/serio1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 39: dmidecode: not found
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.29
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for DNS - udeb
Package: download-installer
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.39
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: choose-mirror
Status: install ok installed
Version: 2.08
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: network-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.40
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.2
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: nic-modules-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: nic-modules
Depends: kernel-image-2.6.17-2-sparc64-di
Description: Network card modules for Sparc kernels
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file
Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet
Package: usb-modules-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: usb-modules
Depends: kernel-image-2.6.17-2-sparc64-di
Description: USB support
Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: choose-mirror-bin
Status: install ok installed
Version: 2.08
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.39
Description: Terminfo entries needed by newt/slang in debian installer
Package: sparc-utils-udeb
Status: install ok unpacked
Version: 1.9-3
Depends: libc6 (>= 2.3.5-1)
Description: sparc-utils package for the Debian installer
Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: kernel-image-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: debian-installer
Status: install ok installed
Version: sparc64-netboot-2.6-20061102
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdrom-core-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di, ide-modules-2.6.17-2-sparc64-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 156
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp3-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 608
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 3.0.4-10
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: ide-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 344
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1100
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2028
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-8
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 404
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libslang2-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 736
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Version: 2.0.6-4
Depends: libc-udeb
Description: S-Lang library for Debian Installer
This is a udeb, or a microdeb, of the S-Lang library with wide charater
support. As such it is the installer counterpart of libslang2.
You only need this package to support applications needing S-Lang during
the Debian installation process time and probably don't need to select it.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 516
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 504
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 208
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.5-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: nano-udeb
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Jordi Mallach <jordi@debian.org>
Version: 2.0.0-1
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Provides: editor
Description: free Pico clone with some new features - tiny build
GNU nano is a free replacement for Pico, the default Pine editor. Pine is
copyrighted under a restrictive licence, that makes it unsuitable for
Debian's main section. GNU nano is an effort to provide a Pico-like
editor, but also includes some features that were missing in the original,
such as 'search and replace', 'goto line' or internationalization support.
.
This package contains a minimal build of GNU nano, aimed for use in
debian-installer. Thus, many features are disabled in this version.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 848
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 860
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 452
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 496
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-common-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di, cdrom-core-modules-2.6.17-2-sparc64-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
This package contains very common SCSI drivers for the Linux kernel.
Package: scsi-core-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: scsi-core-modules
Description: Core SCSI subsystem
This package contains the core SCSI subsystem for the Linux kernel.
Package: scsi-extra-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: scsi-core-modules-2.6.17-2-sparc64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: silo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 196
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: cdebconf-udeb, base-installer, di-utils-mapdevfs, archdetect
Provides: bootable-system
Description: install silo on a hard disk
This udeb will install silo on the hard disk.
Installer-Menu-Item: 73
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 728
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 256
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: sparc (sparc64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-sparc64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
Reply to: