[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#400990: marked as done (installation-report: Etch install over SSH rocks! :-))

Your message dated Thu, 30 Nov 2006 06:38:03 +0100
with message-id <20061130053803.GL5096@kheops.homeunix.org>
and subject line Bug#400990: installation-report: Etch install over SSH rocks! :-)
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports
Version: 2.23
Severity: normal


-- Package-specific info:

Boot method: network
Image version: http://www.slug-firmware.net/
Date: <Date and time of the install>

Machine: NSLU2
Partitions: <df -Tl will do; the raw partition table is preferred>
djoume@winston:~$ df -Tl
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/sda1     ext3     4806904    768412   3794308  17% /
udev         tmpfs       10240        28     10212   1% /dev
devshm       tmpfs       15040         0     15040   0% /dev/shm
/dev/sda3     ext3   234591480    192796 222482072   1% /home

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [ ]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

No problem at all!

I've followed installations instructions on Martin Michlmayr
website (http://www.cyrius.com/debian/nslu2/install.html).

This HOWTO is well written and very easy to follow.

Everythings goes well during the install, the only trouble I had was
a missing key for secure-apt, which only required upgrading 
debian-archive-keyring

kudos to debian-installer team!

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061102)"
X_INSTALLATION_MEDIUM=netboot

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux LKG711707 2.6.17-2-ixp4xx #1 Thu Sep 14 13:29:00 UTC 2006 armv5tel unknown
lspci -nn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -nn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -nn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
lspci -vnn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
lspci -vnn: 	Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: 	Flags: bus master, medium devsel, latency 8, IRQ 28
lspci -vnn: 	Memory at 48000000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: 	Capabilities: [40] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
lspci -vnn: 	Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: 	Flags: bus master, medium devsel, latency 8, IRQ 27
lspci -vnn: 	Memory at 48001000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: 	Capabilities: [40] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20)
lspci -vnn: 	Subsystem: NEC Corporation USB 2.0 [1033:00e0]
lspci -vnn: 	Flags: bus master, medium devsel, latency 68, IRQ 26
lspci -vnn: 	Memory at 48002000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Capabilities: [40] Power Management version 2
lspci -vnn: 
lsmod: Module                  Size  Used by
lsmod: reiserfs              269076  0 
lsmod: ext3                  136808  2 
lsmod: jbd                    57844  1 ext3
lsmod: mbcache                 9156  1 ext3
lsmod: vfat                   13120  0 
lsmod: fat                    53724  1 vfat
lsmod: sd_mod                 18608  4 
lsmod: usb_storage            76075  3 
lsmod: scsi_mod              103792  2 sd_mod,usb_storage
lsmod: evdev                  10368  0 
lsmod: ixp4xx_beeper           3584  0 
lsmod: ixp400_eth             39868  0 
lsmod: ixp400               1065572  1 ixp400_eth
lsmod: ohci_hcd               17060  0 
lsmod: ehci_hcd               31304  0 
lsmod: usbcore               124964  4 usb_storage,ohci_hcd,ehci_hcd
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                    15040       388     14652   3% /dev
df: tmpfs                    15040       388     14652   3% /dev
df: tmpfs                    15040       388     14652   3% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part1   4806904    612820   3949900  13% /target
df: /dev/scsi/host0/bus0/target0/lun0/part3 234591480    191788 222483080   0% /target/home
free:               total         used         free       shared      buffers
free:   Mem:        30080        28468         1612            0          712
free:  Swap:       979956         4120       975836
free: Total:      1010036        32588       977448
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 28: pccardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 29: pccardctl: not found
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: Processor	: XScale-IXP42x Family rev 1 (v5l)
/proc/cpuinfo: BogoMIPS	: 266.24
/proc/cpuinfo: Features	: swp half fastmult edsp 
/proc/cpuinfo: CPU implementer	: 0x69
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant	: 0x0
/proc/cpuinfo: CPU part	: 0x41f
/proc/cpuinfo: CPU revision	: 1
/proc/cpuinfo: Cache type	: undefined 5
/proc/cpuinfo: Cache clean	: undefined 5
/proc/cpuinfo: Cache lockdown	: undefined 5
/proc/cpuinfo: Cache format	: Harvard
/proc/cpuinfo: I size		: 32768
/proc/cpuinfo: I assoc		: 32
/proc/cpuinfo: I line length	: 32
/proc/cpuinfo: I sets		: 32
/proc/cpuinfo: D size		: 32768
/proc/cpuinfo: D assoc		: 32
/proc/cpuinfo: D line length	: 32
/proc/cpuinfo: D sets		: 32
/proc/cpuinfo: 
/proc/cpuinfo: Hardware	: Linksys NSLU2
/proc/cpuinfo: Revision	: 0000
/proc/cpuinfo: Serial		: 0000000000000000
/proc/ioports: 00000000-0000ffff : PCI I/O Space
/proc/iomem: 00000000-01ffffff : System RAM
/proc/iomem:   0001e000-001f335b : Kernel text
/proc/iomem:   001f4000-0026c03f : Kernel data
/proc/iomem: 48000000-4bffffff : PCI Memory Space
/proc/iomem:   48000000-48000fff : 0000:00:01.0
/proc/iomem:     48000000-48000fff : ohci_hcd
/proc/iomem:   48001000-48001fff : 0000:00:01.1
/proc/iomem:     48001000-48001fff : ohci_hcd
/proc/iomem:   48002000-480020ff : 0000:00:01.2
/proc/iomem:     48002000-480020ff : ehci_hcd
/proc/iomem: 50000000-50ffffff : IXP4XX-Flash.0
/proc/iomem:   50000000-50ffffff : IXP4XXFlash
/proc/iomem: c8000000-c8000fff : serial8250.0
/proc/iomem:   c8000000-c800001f : serial
/proc/iomem: c8001000-c8001fff : serial8250.0
/proc/iomem:   c8001000-c800101f : serial
/proc/interrupts:            CPU0
/proc/interrupts:   0:          0   osal
/proc/interrupts:   1:       1111   osal
/proc/interrupts:   2:          0   osal
/proc/interrupts:   3:          0   ixp400_eth
/proc/interrupts:   5:    5069021   IXP4xx Timer Tick
/proc/interrupts:  11:       1343   ixp4xx-beeper
/proc/interrupts:  15:        925   serial
/proc/interrupts:  18:  201532908   ixp400_eth
/proc/interrupts:  22:          0   NSLU2 power button
/proc/interrupts:  26:    2502103   ehci_hcd:usb1
/proc/interrupts:  27:          0   ohci_hcd:usb3
/proc/interrupts:  28:          0   ohci_hcd:usb2
/proc/interrupts:  29:          0   NSLU2 reset button
/proc/interrupts: Err:          0
/proc/meminfo: MemTotal:        30080 kB
/proc/meminfo: MemFree:          1588 kB
/proc/meminfo: Buffers:           712 kB
/proc/meminfo: Cached:          17256 kB
/proc/meminfo: SwapCached:       1604 kB
/proc/meminfo: Active:          11460 kB
/proc/meminfo: Inactive:         8604 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:        30080 kB
/proc/meminfo: LowFree:          1588 kB
/proc/meminfo: SwapTotal:      979956 kB
/proc/meminfo: SwapFree:       975836 kB
/proc/meminfo: Dirty:             548 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: Mapped:           3252 kB
/proc/meminfo: Slab:             4224 kB
/proc/meminfo: CommitLimit:    994996 kB
/proc/meminfo: Committed_AS:     9660 kB
/proc/meminfo: PageTables:        296 kB
/proc/meminfo: VmallocTotal:   991232 kB
/proc/meminfo: VmallocUsed:     17292 kB
/proc/meminfo: VmallocChunk:   973848 kB
/proc/bus/input/devices: I: Bus=0019 Vendor=001f Product=0001 Version=0100
/proc/bus/input/devices: N: Name="ixp4xx beeper"
/proc/bus/input/devices: P: Phys=ixp4xx/gpio
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0 
/proc/bus/input/devices: B: EV=40001
/proc/bus/input/devices: B: SND=6
/proc/bus/input/devices: 
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 39: dmidecode: not found

==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.29
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: oldsys-preseed
Status: install ok unpacked
Version: 0.6
Description: Preseed debian-installer from an existing device

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for DNS - udeb

Package: download-installer
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23

Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: di-utils
Status: install ok installed
Version: 1.39
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: choose-mirror
Status: install ok installed
Version: 2.08
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23

Package: usb-modules-2.6.17-2-ixp4xx-di
Status: install ok unpacked
Version: 1.3
Provides: usb-modules
Depends: kernel-image-2.6.17-2-ixp4xx-di
Description: USB support

Package: network-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.40
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: nic-usb-modules-2.6.17-2-ixp4xx-di
Status: install ok unpacked
Version: 1.3
Provides: nic-usb-modules
Depends: kernel-image-2.6.17-2-ixp4xx-di, usb-modules-2.6.17-2-ixp4xx-di
Description: USB NIC drivers

Package: openssh-server-udeb
Status: install ok installed
Version: 1:4.3p2-5
Depends: libc6 (>= 2.3.5-1), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell server for the Debian installer

Package: network-console
Status: install ok unpacked
Version: 1.8
Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1)
Description: Continue installation remotely using SSH
Installer-Menu-Item: 21

Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.2
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon

Package: libnss-files-udeb
Status: install ok installed
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for files - udeb

Package: libcrypto0.9.8-udeb
Status: install ok installed
Version: 0.9.8c-3
Provides: libssl0.9.8
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: crypto shared library - udeb

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre2-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System

Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file

Package: input-modules-2.6.17-2-ixp4xx-di
Status: install ok unpacked
Version: 1.3
Provides: input-modules
Depends: kernel-image-2.6.17-2-ixp4xx-di, usb-modules-2.6.17-2-ixp4xx-di
Description: Input devices support

Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18

Package: devio-udeb
Status: install ok unpacked
Version: 1.2-1
Depends: libc6 (>= 2.3.5-1)
Description: correctly read (or write) a region of a block device

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: net-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet

Package: kernel-image-2.6.17-2-ixp4xx-di
Status: install ok unpacked
Version: 1.3
Provides: kernel-image, socket-modules
Description: Linux kernel binary image for the Debian installer

Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector

Package: beep-udeb
Status: install ok unpacked
Version: 1.2.2-18
Depends: libc6 (>= 2.3.5-1)
Description: advanced pc-speaker beeper

Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: choose-mirror-bin
Status: install ok installed
Version: 2.08
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.39
Description: Terminfo entries needed by newt/slang in debian installer

Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: zlib1g-udeb
Status: install ok installed
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer

Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: debian-installer
Status: install ok installed
Version: ixp4xx-netboot-20061102
Description: debian installation image

Package: acorn-fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Philip Blundell <pb@nexus.co.uk>
Version: 3.0.6-6.1
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
 fdisk package

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 565
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 49
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 358
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: ext3-modules-2.6.17-2-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 280
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.3
Depends: kernel-image-2.6.17-2-ixp4xx-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fat-modules-2.6.17-2-ixp4xx-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.3
Depends: kernel-image-2.6.17-2-ixp4xx-di
Provides: fat-modules
Description: FAT filesystem support
 This package contains the FAT and VFAT filesystem modules for the Linux kernel.

Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: flash-kernel-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.7
Depends: cdebconf-udeb, base-installer
Provides: bootable-system
Description: Configure flash to boot the system
Installer-Menu-Item: 73

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 31
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1824
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-7
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 356
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 15
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's),
 using a standard which is blessed by both Microsoft and DCE, and is
 being proposed as an internet standard.  See the internet-draft:
 .
                draft-leach-uuids-guids-01.txt
 .
 for more information.
 .
 This is a minimal package for debian-installer.

Package: lowmem
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Description: free memory for lowmem install
Installer-Menu-Item: 25

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: partconf
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1), partconf-mkfstab
Recommends: partitioned-harddrives
Provides: made-filesystems, made-swapspace, mounted-partitions, created-fstab
Description: Configure and Mount Partitions
 User friendly debian-installer program for creating file systems,
 swap partitions and mounting them in /target
Installer-Menu-Item: 45

Package: partconf-mkfstab
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 26
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for creating fstab file
 Helper program for creating fstab files in the new installed debian
 system.

Package: partitioner
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.37
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, harddrive-detection, acorn-fdisk-udeb
Provides: partitioned-harddrives
Description: Partition a hard drive
 Use this module to partition the physical disks in the system.
Installer-Menu-Item: 43

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 560
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 269
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: scsi-core-modules-2.6.17-2-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 184
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.3
Depends: kernel-image-2.6.17-2-ixp4xx-di
Provides: scsi-core-modules
Description: Core SCSI subsystem
 This package contains the core SCSI subsystem for the Linux kernel.

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: usb-storage-modules-2.6.17-2-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.3
Depends: scsi-core-modules-2.6.17-2-ixp4xx-di, usb-modules-2.6.17-2-ixp4xx-di
Provides: usb-storage-modules
Description: USB storage support
 This package contains the USB storage driver for the Linux kernel.

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: reiserfs-modules-2.6.17-2-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 328
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.3
Depends: kernel-image-2.6.17-2-ixp4xx-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: arm (armv5tel)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-ixp4xx
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

installation-report depends on no packages.

Versions of packages installation-report recommends:
pn  pciutils                      <none>     (no description available)
ii  reportbug                     3.31       reports bugs in the Debian distrib

-- no debconf information

--- End Message ---
--- Begin Message --- 
> I've followed installations instructions on Martin Michlmayr
> website (http://www.cyrius.com/debian/nslu2/install.html).
> 
> This HOWTO is well written and very easy to follow.
> 
> Everythings goes well during the install, the only trouble I had was
> a missing key for secure-apt, which only required upgrading 
> debian-archive-keyring


We like such install reports....

Given that your installation was a complete success, I do as
usual with reports for successful installations: I close the bug..:-)

This does not of course mean you weren't right to report. Knowing the
installations are correct is important for the d-i team.

Many thanks for your time testing the Debian Installer and reporting
your results. Have fun with your new Debian system!

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: