[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#400782: marked as done (installation-report: Netra)



Your message dated Tue, 28 Nov 2006 21:26:23 +0000
with message-id <1164749183.7245.49.camel@duncow>
and subject line I messed up reporting 400782 (network driver loading problem on Sun Netra X1)
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: installation-reports
Version: 2.23
Severity: important

Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Richard Mortimer <richm@oldelvet.org.uk>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: installation-report: Sun Netra-X1 install configures dmfe driver rather than
 Tulip driver
Message-ID: <20061128171857.3449.75794.reportbug@pingu.home.oldelvet.org.uk>
X-Mailer: reportbug 3.31
Date: Tue, 28 Nov 2006 17:18:57 +0000

Package: installation-reports
Version: 2.23
Severity: important



-- Package-specific info:

Boot method: network
Image version: http://people.debian.org/~stappers/d-i/images/daily/sparc64/netboot/2.6/boot.img build 27/Nov/2006
Date: 28/November/2006 10:00 GMT

Machine: Sun Netra X1
Partitions: <df -Tl will do; the raw partition table is preferred>

pingu:~# fdisk -l /dev/hda

Disk /dev/hda (Sun disk label): 16 heads, 63 sectors, 39691 cylinders
Units = cylinders of 1008 * 512 bytes

   Device Flag    Start       End    Blocks   Id  System
/dev/hda1             0       992    499968    1  Boot
~/dev/hda2           992     20368   9765504   83  Linux native
/dev/hda3             0     39693  20005272    5  Whole disk
/dev/hda4         20368     22306    976752   82  Linux swap
/dev/hda5         22306     24290    999936    1  Boot
/dev/hda6         24290     26274    999936   83  Linux native
/dev/hda7         26274     32983   3381336   83  Linux native
/dev/hda8         32983     39693   3381840   83  Linux native


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [E]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [ ]

Comments/Problems:

The install went well apart from the loading of the wrong driver for the
onboard network devices DM9102 devices. The installer said that it was
loading the Tulip driver but also loaded the dmfe driver prior to it. The
dmfe driver "ate" the devices and Tulip found nothing to probe. This is a
problem because dmfe does not work with the onboard devices - it gives
lots of PCI bus errors and does not actually transfer traffic.

I was able to drop down to a shell and unload both dmfe and tulip with
modprobe -r and then reload tulip only. At this stage the networks setup
just fine.

Note the same problem arose during the reboot after installation.

FYI this machine/model is not capable of booting from a CD drive so it
is vital that network devices get loaded properly during install.

Here are a few bits of relevant output from the system.

Devices being loaded...

TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
eth0: Davicom DM9102 at pci0000:00:05.0, 00:00:00:00:00:00, irq 7418560.
eth1: Davicom DM9102 at pci0000:00:0c.0, 00:00:00:00:00:00, irq 7417856.
Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
ohci_hcd 0000:00:0a.0: OHCI Host Controller

We get a similar thing in the output during the post install boot

ALI15X3: 100% native mode on irq 5,7cc
    ide0: BM-DMA at 0x1fe02010220-0x1fe02010227, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1fe02010228-0x1fe0201022f, BIOS settings: hdc:pio, hdd:pio
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
hda: ST320423A, ATA DISK drive
ide0 at 0x1fe02010200-0x1fe02010207,0x1fe0201020a on irq 5,7cc
hdc: ST320423A, ATA DISK drive
ide1 at 0x1fe02010210-0x1fe02010217,0x1fe0201020e on irq 5,7cc
eth0: Davicom DM9102 at pci0000:00:05.0, 00:00:00:00:00:00, irq 7418560.
eth1: Davicom DM9102 at pci0000:00:0c.0, 00:00:00:00:00:00, irq 7417856.
Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
hda: max request size: 128KiB

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20061127-12:05)"
X_INSTALLATION_MEDIUM=netboot-2.6

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux pingu 2.6.17-2-sparc64 #1 Wed Sep 13 10:39:24 PDT 2006 sparc64 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe [108e:a001]
lspci -nn: 00:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
lspci -nn: 00:05.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -nn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -nn: 00:0a.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03)
lspci -nn: 00:0c.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -nn: 00:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3)
lspci -vnn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe [108e:a001]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 40
lspci -vnn: 
lspci -vnn: 00:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
lspci -vnn: 	Flags: medium devsel
lspci -vnn: 
lspci -vnn: 00:05.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -vnn: 	Flags: bus master, medium devsel, latency 160, IRQ 7418560
lspci -vnn: 	I/O ports at 1fe02010100 [size=256]
lspci -vnn: 	Memory at 1ff00002000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Expansion ROM at 1ff00100000 [disabled] [size=256K]
lspci -vnn: 	Capabilities: [50] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -vnn: 	Subsystem: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0
lspci -vnn: 	Capabilities: [a0] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:0a.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10)
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 7418816
lspci -vnn: 	Memory at 1ff01000000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: 	Capabilities: [60] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0c.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -vnn: 	Flags: bus master, medium devsel, latency 160, IRQ 7417856
lspci -vnn: 	I/O ports at 1fe02010000 [size=256]
lspci -vnn: 	[virtual] Memory at 1ff00000000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Expansion ROM at 1ff00040000 [disabled] [size=256K]
lspci -vnn: 	Capabilities: [50] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3) (prog-if ff)
lspci -vnn: 	Flags: bus master, medium devsel, latency 16, IRQ 7418048
lspci -vnn: 	I/O ports at 1fe02010200 [size=8]
lspci -vnn: 	I/O ports at 1fe02010208 [size=4]
lspci -vnn: 	I/O ports at 1fe02010210 [size=8]
lspci -vnn: 	I/O ports at 1fe0201020c [size=4]
lspci -vnn: 	I/O ports at 1fe02010220 [size=16]
lspci -vnn: 	Capabilities: [60] Power Management version 2
lspci -vnn: 
lsmod: Module                  Size  Used by
lsmod: xfs                   483216  0 
lsmod: reiserfs              312448  0 
lsmod: jfs                   195440  0 
lsmod: ext3                  151248  3 
lsmod: jbd                    58344  1 ext3
lsmod: vfat                   14464  0 
lsmod: fat                    56304  1 vfat
lsmod: isofs                  44464  0 
lsmod: ide_cd                 45128  0 
lsmod: cdrom                  41064  1 ide_cd
lsmod: ide_generic             1664  0 [permanent]
lsmod: cmd64x                 12152  0 [permanent]
lsmod: cs5520                  5632  0 [permanent]
lsmod: cs5530                  6080  0 [permanent]
5~lsmod: cy82c693                5384  0 [permanent]
lsmod: it821x                  9540  0 [permanent]
lsmod: ns87415                 5100  0 [permanent]
lsmod: pdc202xx_new            9984  0 [permanent]
lsmod: pdc202xx_old           11648  0 [permanent]
lsmod: serverworks            10512  0 [permanent]
lsmod: siimage                12864  0 [permanent]
lsmod: trm290                  5250  0 [permanent]
lsmod: via82cxxx              10372  0 [permanent]
lsmod: ide_disk               17536  5 
lsmod: generic                 5892  0 [permanent]
lsmod: alim15x3               13336  0 [permanent]
lsmod: tulip                  53832  0 
lsmod: ohci_hcd               19588  0 
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                   257376       912    256464   0% /dev
df: tmpfs                   257376       912    256464   0% /dev
df: tmpfs                   257376       912    256464   0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part7   3328136    603544   2555528  19% /target
df: /dev/ide/host0/bus0/target0/lun0/part5    984184     24520    909668   3% /target/boot
df: /dev/ide/host0/bus0/target0/lun0/part8   3328640   1928424   1231124  61% /target/home
free:               total         used         free       shared      buffers
free:   Mem:       514752       423464        91288            0        27928
free:  Swap:       976736          912       975824
free: Total:      1491488       424376      1067112
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 28: pccardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 29: pccardctl: not found
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: cpu		: TI UltraSparc IIe (Hummingbird)
/proc/cpuinfo: fpu		: UltraSparc IIe integrated FPU
/proc/cpuinfo: prom		: OBP 4.0.9 2001/05/17 21:52
/proc/cpuinfo: type		: sun4u
/proc/cpuinfo: ncpus probed	: 1
5~/proc/cpuinfo: ncpus active	: 1
/proc/cpuinfo: D$ parity tl1	: 0
/proc/cpuinfo: I$ parity tl1	: 0
/proc/cpuinfo: Cpu0Bogo	: 11.12
/proc/cpuinfo: Cpu0ClkTck	: 0000000017d78400
/proc/cpuinfo: MMU Type	: Spitfire
/proc/ioports: 1fe02000000-1fe02ffffff : SABRE0 PBMA
/proc/ioports:   1fe02000070-1fe02000071 : rtc
/proc/ioports:   1fe020002e8-1fe020002ef : serial
/proc/ioports:   1fe020003f8-1fe020003ff : serial
/proc/ioports:   1fe02002000-1fe0200203f : 0000:00:03.0
/proc/ioports:   1fe02004000-1fe0200401f : 0000:00:03.0
/proc/ioports:   1fe02008010-1fe02008011 : SUNW,lomh
/proc/ioports:   1fe02010000-1fe020100ff : 0000:00:0c.0
/proc/ioports:     1fe02010000-1fe020100ff : tulip
/proc/ioports:   1fe02010100-1fe020101ff : 0000:00:05.0
/proc/ioports:     1fe02010100-1fe020101ff : tulip
~/proc/ioports:   1fe02010200-1fe02010207 : 0000:00:0d.0
/proc/ioports:     1fe02010200-1fe02010207 : ide0
/proc/ioports:   1fe02010208-1fe0201020b : 0000:00:0d.0
/proc/ioports:     1fe0201020a-1fe0201020a : ide0
/proc/ioports:   1fe0201020c-1fe0201020f : 0000:00:0d.0
/proc/ioports:     1fe0201020e-1fe0201020e : ide1
/proc/ioports:   1fe02010210-1fe02010217 : 0000:00:0d.0
/proc/ioports:     1fe02010210-1fe02010217 : ide1
/proc/ioports:   1fe02010220-1fe0201022f : 0000:00:0d.0
/proc/ioports:     1fe02010220-1fe02010227 : ide0
/proc/ioports:     1fe02010228-1fe0201022f : ide1
/proc/iomem: 1ff00000000-1ff5fffffff : SABRE0 PBMA
/proc/iomem:   1ff00000000-1ff000000ff : 0000:00:0c.0
/proc/iomem:     1ff00000000-1ff000000ff : tulip
/proc/iomem:   1ff00002000-1ff000020ff : 0000:00:05.0
/proc/iomem:     1ff00002000-1ff000020ff : tulip
/proc/iomem:   1ff00040000-1ff0007ffff : 0000:00:0c.0
/proc/iomem:   1ff000a0000-1ff000bffff : Video RAM area
/proc/iomem:   1ff000c0000-1ff000c7fff : Video ROM
/proc/iomem:   1ff000f0000-1ff000fffff : System ROM
/proc/iomem:   1ff00100000-1ff0013ffff : 0000:00:05.0
/proc/iomem:   1ff01000000-1ff01000fff : 0000:00:0a.0
/proc/iomem:     1ff01000000-1ff01000fff : ohci_hcd
/proc/interrupts:   0:    1938325  timer:dead
/proc/interrupts:   5:      41140  ide0:7cc, ide1:7cc
/proc/interrupts:   6:     206915  eth1:7c6
/proc/interrupts:  12:      33538  su(serial):7eb
/proc/interrupts:  14:          0  ohci_hcd:usb1:7e4
/proc/interrupts:  15:          2  SABRE UE:7ee, SABRE CE:7ef, SABRE PCIERR:7f0, power:7e5
/proc/meminfo: MemTotal:       514752 kB
/proc/meminfo: MemFree:         91272 kB
/proc/meminfo: Buffers:         27928 kB
/proc/meminfo: Cached:         329120 kB
/proc/meminfo: SwapCached:        296 kB
~/proc/meminfo: Active:         206064 kB
/proc/meminfo: Inactive:       166456 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:       514752 kB
/proc/meminfo: LowFree:         91272 kB
/proc/meminfo: SwapTotal:      976736 kB
/proc/meminfo: SwapFree:       975824 kB
/proc/meminfo: Dirty:             584 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: Mapped:          17128 kB
/proc/meminfo: Slab:            45336 kB
/proc/meminfo: CommitLimit:   1234112 kB
/proc/meminfo: Committed_AS:    20800 kB
/proc/meminfo: PageTables:        432 kB
/proc/meminfo: VmallocTotal:  4194304 kB
/proc/meminfo: VmallocUsed:      1800 kB
/proc/meminfo: VmallocChunk:  4192504 kB
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 39: dmidecode: not found

==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.30
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-8
Description: GNU C Library: NSS helper for DNS - udeb

Package: download-installer
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23

Package: lowmemcheck
Status: install ok unpacked
Version: 1.22
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok installed
Version: 1.41
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: di-utils
Status: install ok installed
Version: 1.41
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: choose-mirror
Status: install ok installed
Version: 2.08
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23

Package: network-preseed
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.109
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre3-1
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.45
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: udev-udeb
Status: install ok unpacked
Version: 0.103-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon

Package: libfribidi0-udeb
Status: install ok unpacked
~Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm

Package: nic-modules-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: nic-modules
Depends: kernel-image-2.6.17-2-sparc64-di
Description: Network card modules for Sparc kernels

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 2.0.1-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.109
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
5~Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.109
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
5~
Package: iso-3166-udeb
Status: install ok installed
Version: 0.58-1
Description: provides iso_3166.tab file

Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.21
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: net-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet

Package: usb-modules-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: usb-modules
Depends: kernel-image-2.6.17-2-sparc64-di
Description: USB support

Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector

Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: choose-mirror-bin
Status: install ok installed
Version: 2.08
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.41
Description: Terminfo entries needed by newt/slang in debian installer

Package: sparc-utils-udeb
Status: install ok unpacked
Version: 1.9-3
Depends: libc6 (>= 2.3.5-1)
Description: sparc-utils package for the Debian installer

Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.47
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions

Package: kernel-image-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.21
Description: debconf preseeding via environment variables

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.109
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer

Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.109
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: debian-installer
Status: install ok installed
Version: sparc64-netboot-2.6-20061127-12:05
Description: debian installation image

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 612
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.69
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: cdrom-core-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di, ide-modules-2.6.17-2-sparc64-di
Provides: cdrom-core-modules
Description: CDROM support
 This package contains core CDROM support for the Linux kernel.

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.1
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: dhcp3-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 608
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 3.0.4-10
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
 dhcp-client-udeb is a minimal dhcp package used by the debian-installer.

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.41
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: ext3-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fat-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: fat-modules
Description: FAT filesystem support
 This package contains the FAT and VFAT filesystem modules for the Linux kernel.

Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: ide-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 344
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: ide-modules
Description: IDE drivers
 This package contains IDE drivers for the Linux kernel.

Package: jfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: jfs-modules
Description: JFS filesystem support
 This package contains the JFS filesystem module for the Linux kernel.

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1100
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2028
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-8
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 404
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.
 .
 This is a minimal package for debian-installer.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 516
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: md-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 504
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: md-modules
Description: RAID and LVM support
 This package contains RAID and LVM modules for the Linux kernel.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 208
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-6
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 arrays (e.g. software RAID, multipath devices).
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 61
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 860
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 98
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 860
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: reiserfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 452
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.

Package: sata-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 496
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di
Provides: sata-modules
Description: SATA drivers
 This package contains SATA drivers for the Linux kernel.

Package: scsi-common-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di, cdrom-core-modules-2.6.17-2-sparc64-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
 This package contains very common SCSI drivers for the Linux kernel.

Package: scsi-core-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: scsi-core-modules
Description: Core SCSI subsystem
 This package contains the core SCSI subsystem for the Linux kernel.

Package: scsi-extra-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: scsi-core-modules-2.6.17-2-sparc64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
 This package contains uncommon SCSI drivers for the Linux kernel.
 This includes SCSI RAID drivers, and some of the less common SCSI
 controllers.

Package: silo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 196
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: cdebconf-udeb, base-installer, di-utils-mapdevfs, archdetect
Provides: bootable-system
Description: install silo on a hard disk
 This udeb will install silo on the hard disk.
Installer-Menu-Item: 73

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 300
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: xfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 728
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: xfs-modules
Description: XFS filesystem support
 This package contains the XFS filesystem module for the Linux kernel.

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 256
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: sparc (sparc64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-sparc64
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

installation-report depends on no packages.

Versions of packages installation-report recommends:
pn  pciutils                      <none>     (no description available)
ii  reportbug                     3.31       reports bugs in the Debian distrib

-- no debconf information

-- Package-specific info:

Boot method: network
Image version: blah
Date: <Date and time of the install>

Machine: 
Partitions: <df -Tl will do; the raw partition table is preferred>


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [ ]
Detect network card:    [ ]
Configure network:      [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>


-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20061127-12:05)"
X_INSTALLATION_MEDIUM=netboot-2.6

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux pingu 2.6.17-2-sparc64 #1 Wed Sep 13 10:39:24 PDT 2006 sparc64 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe [108e:a001]
lspci -nn: 00:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
lspci -nn: 00:05.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -nn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -nn: 00:0a.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03)
lspci -nn: 00:0c.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -nn: 00:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3)
lspci -vnn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe [108e:a001]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 40
lspci -vnn: 
lspci -vnn: 00:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
lspci -vnn: 	Flags: medium devsel
lspci -vnn: 
lspci -vnn: 00:05.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -vnn: 	Flags: bus master, medium devsel, latency 160, IRQ 7418560
lspci -vnn: 	I/O ports at 1fe02010100 [size=256]
lspci -vnn: 	Memory at 1ff00002000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Expansion ROM at 1ff00100000 [disabled] [size=256K]
lspci -vnn: 	Capabilities: [50] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -vnn: 	Subsystem: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0
lspci -vnn: 	Capabilities: [a0] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:0a.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10)
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 7418816
lspci -vnn: 	Memory at 1ff01000000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: 	Capabilities: [60] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:0c.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
lspci -vnn: 	Flags: bus master, medium devsel, latency 160, IRQ 7417856
lspci -vnn: 	I/O ports at 1fe02010000 [size=256]
lspci -vnn: 	[virtual] Memory at 1ff00000000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Expansion ROM at 1ff00040000 [disabled] [size=256K]
lspci -vnn: 	Capabilities: [50] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3) (prog-if ff)
lspci -vnn: 	Flags: bus master, medium devsel, latency 16, IRQ 7418048
lspci -vnn: 	I/O ports at 1fe02010200 [size=8]
lspci -vnn: 	I/O ports at 1fe02010208 [size=4]
lspci -vnn: 	I/O ports at 1fe02010210 [size=8]
lspci -vnn: 	I/O ports at 1fe0201020c [size=4]
lspci -vnn: 	I/O ports at 1fe02010220 [size=16]
lspci -vnn: 	Capabilities: [60] Power Management version 2
lspci -vnn: 
lsmod: Module                  Size  Used by
lsmod: xfs                   483216  0 
lsmod: reiserfs              312448  0 
lsmod: jfs                   195440  0 
lsmod: ext3                  151248  3 
lsmod: jbd                    58344  1 ext3
lsmod: vfat                   14464  0 
lsmod: fat                    56304  1 vfat
lsmod: isofs                  44464  0 
lsmod: ide_cd                 45128  0 
lsmod: cdrom                  41064  1 ide_cd
lsmod: ide_generic             1664  0 [permanent]
lsmod: cmd64x                 12152  0 [permanent]
lsmod: cs5520                  5632  0 [permanent]
lsmod: cs5530                  6080  0 [permanent]
lsmod: cy82c693                5384  0 [permanent]
lsmod: it821x                  9540  0 [permanent]
lsmod: ns87415                 5100  0 [permanent]
lsmod: pdc202xx_new            9984  0 [permanent]
lsmod: pdc202xx_old           11648  0 [permanent]
lsmod: serverworks            10512  0 [permanent]
lsmod: siimage                12864  0 [permanent]
lsmod: trm290                  5250  0 [permanent]
lsmod: via82cxxx              10372  0 [permanent]
lsmod: ide_disk               17536  5 
lsmod: generic                 5892  0 [permanent]
lsmod: alim15x3               13336  0 [permanent]
lsmod: tulip                  53832  0 
lsmod: ohci_hcd               19588  0 
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                   257376       912    256464   0% /dev
df: tmpfs                   257376       912    256464   0% /dev
df: tmpfs                   257376       912    256464   0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part7   3328136    603544   2555528  19% /target
df: /dev/ide/host0/bus0/target0/lun0/part5    984184     24520    909668   3% /target/boot
df: /dev/ide/host0/bus0/target0/lun0/part8   3328640   1928424   1231124  61% /target/home
free:               total         used         free       shared      buffers
free:   Mem:       514752       423464        91288            0        27928
free:  Swap:       976736          912       975824
free: Total:      1491488       424376      1067112
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 28: pccardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 29: pccardctl: not found
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: cpu		: TI UltraSparc IIe (Hummingbird)
/proc/cpuinfo: fpu		: UltraSparc IIe integrated FPU
/proc/cpuinfo: prom		: OBP 4.0.9 2001/05/17 21:52
/proc/cpuinfo: type		: sun4u
/proc/cpuinfo: ncpus probed	: 1
/proc/cpuinfo: ncpus active	: 1
/proc/cpuinfo: D$ parity tl1	: 0
/proc/cpuinfo: I$ parity tl1	: 0
/proc/cpuinfo: Cpu0Bogo	: 11.12
/proc/cpuinfo: Cpu0ClkTck	: 0000000017d78400
/proc/cpuinfo: MMU Type	: Spitfire
/proc/ioports: 1fe02000000-1fe02ffffff : SABRE0 PBMA
/proc/ioports:   1fe02000070-1fe02000071 : rtc
/proc/ioports:   1fe020002e8-1fe020002ef : serial
/proc/ioports:   1fe020003f8-1fe020003ff : serial
/proc/ioports:   1fe02002000-1fe0200203f : 0000:00:03.0
/proc/ioports:   1fe02004000-1fe0200401f : 0000:00:03.0
/proc/ioports:   1fe02008010-1fe02008011 : SUNW,lomh
/proc/ioports:   1fe02010000-1fe020100ff : 0000:00:0c.0
/proc/ioports:     1fe02010000-1fe020100ff : tulip
/proc/ioports:   1fe02010100-1fe020101ff : 0000:00:05.0
/proc/ioports:     1fe02010100-1fe020101ff : tulip
/proc/ioports:   1fe02010200-1fe02010207 : 0000:00:0d.0
/proc/ioports:     1fe02010200-1fe02010207 : ide0
/proc/ioports:   1fe02010208-1fe0201020b : 0000:00:0d.0
/proc/ioports:     1fe0201020a-1fe0201020a : ide0
/proc/ioports:   1fe0201020c-1fe0201020f : 0000:00:0d.0
/proc/ioports:     1fe0201020e-1fe0201020e : ide1
/proc/ioports:   1fe02010210-1fe02010217 : 0000:00:0d.0
/proc/ioports:     1fe02010210-1fe02010217 : ide1
/proc/ioports:   1fe02010220-1fe0201022f : 0000:00:0d.0
/proc/ioports:     1fe02010220-1fe02010227 : ide0
/proc/ioports:     1fe02010228-1fe0201022f : ide1
/proc/iomem: 1ff00000000-1ff5fffffff : SABRE0 PBMA
/proc/iomem:   1ff00000000-1ff000000ff : 0000:00:0c.0
/proc/iomem:     1ff00000000-1ff000000ff : tulip
/proc/iomem:   1ff00002000-1ff000020ff : 0000:00:05.0
/proc/iomem:     1ff00002000-1ff000020ff : tulip
/proc/iomem:   1ff00040000-1ff0007ffff : 0000:00:0c.0
/proc/iomem:   1ff000a0000-1ff000bffff : Video RAM area
/proc/iomem:   1ff000c0000-1ff000c7fff : Video ROM
/proc/iomem:   1ff000f0000-1ff000fffff : System ROM
/proc/iomem:   1ff00100000-1ff0013ffff : 0000:00:05.0
/proc/iomem:   1ff01000000-1ff01000fff : 0000:00:0a.0
/proc/iomem:     1ff01000000-1ff01000fff : ohci_hcd
/proc/interrupts:   0:    1938325  timer:dead
/proc/interrupts:   5:      41140  ide0:7cc, ide1:7cc
/proc/interrupts:   6:     206915  eth1:7c6
/proc/interrupts:  12:      33538  su(serial):7eb
/proc/interrupts:  14:          0  ohci_hcd:usb1:7e4
/proc/interrupts:  15:          2  SABRE UE:7ee, SABRE CE:7ef, SABRE PCIERR:7f0, power:7e5
/proc/meminfo: MemTotal:       514752 kB
/proc/meminfo: MemFree:         91272 kB
/proc/meminfo: Buffers:         27928 kB
/proc/meminfo: Cached:         329120 kB
/proc/meminfo: SwapCached:        296 kB
/proc/meminfo: Active:         206064 kB
/proc/meminfo: Inactive:       166456 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:       514752 kB
/proc/meminfo: LowFree:         91272 kB
/proc/meminfo: SwapTotal:      976736 kB
/proc/meminfo: SwapFree:       975824 kB
/proc/meminfo: Dirty:             584 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: Mapped:          17128 kB
/proc/meminfo: Slab:            45336 kB
/proc/meminfo: CommitLimit:   1234112 kB
/proc/meminfo: Committed_AS:    20800 kB
/proc/meminfo: PageTables:        432 kB
/proc/meminfo: VmallocTotal:  4194304 kB
/proc/meminfo: VmallocUsed:      1800 kB
/proc/meminfo: VmallocChunk:  4192504 kB
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 39: dmidecode: not found

==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.30
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-8
Description: GNU C Library: NSS helper for DNS - udeb

Package: download-installer
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23

Package: lowmemcheck
Status: install ok unpacked
Version: 1.22
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok installed
Version: 1.41
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: di-utils
Status: install ok installed
Version: 1.41
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: choose-mirror
Status: install ok installed
Version: 2.08
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23

Package: network-preseed
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.109
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre3-1
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.45
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: udev-udeb
Status: install ok unpacked
Version: 0.103-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm

Package: nic-modules-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: nic-modules
Depends: kernel-image-2.6.17-2-sparc64-di
Description: Network card modules for Sparc kernels

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 2.0.1-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.109
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.109
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System

Package: iso-3166-udeb
Status: install ok installed
Version: 0.58-1
Description: provides iso_3166.tab file

Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.21
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: net-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet

Package: usb-modules-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: usb-modules
Depends: kernel-image-2.6.17-2-sparc64-di
Description: USB support

Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector

Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: choose-mirror-bin
Status: install ok installed
Version: 2.08
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.41
Description: Terminfo entries needed by newt/slang in debian installer

Package: sparc-utils-udeb
Status: install ok unpacked
Version: 1.9-3
Depends: libc6 (>= 2.3.5-1)
Description: sparc-utils package for the Debian installer

Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.47
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions

Package: kernel-image-2.6.17-2-sparc64-di
Status: install ok unpacked
Version: 1.14
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.21
Description: debconf preseeding via environment variables

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.109
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer

Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.109
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: debian-installer
Status: install ok installed
Version: sparc64-netboot-2.6-20061127-12:05
Description: debian installation image

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 612
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.69
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: cdrom-core-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di, ide-modules-2.6.17-2-sparc64-di
Provides: cdrom-core-modules
Description: CDROM support
 This package contains core CDROM support for the Linux kernel.

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.1
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: dhcp3-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 608
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 3.0.4-10
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
 dhcp-client-udeb is a minimal dhcp package used by the debian-installer.

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.41
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: ext3-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fat-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: fat-modules
Description: FAT filesystem support
 This package contains the FAT and VFAT filesystem modules for the Linux kernel.

Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: ide-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 344
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: ide-modules
Description: IDE drivers
 This package contains IDE drivers for the Linux kernel.

Package: jfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: jfs-modules
Description: JFS filesystem support
 This package contains the JFS filesystem module for the Linux kernel.

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1100
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2028
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-8
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 404
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.
 .
 This is a minimal package for debian-installer.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 516
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: md-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 504
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: md-modules
Description: RAID and LVM support
 This package contains RAID and LVM modules for the Linux kernel.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 208
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-6
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 arrays (e.g. software RAID, multipath devices).
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 61
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 860
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 98
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 860
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: reiserfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 452
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.

Package: sata-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 496
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di
Provides: sata-modules
Description: SATA drivers
 This package contains SATA drivers for the Linux kernel.

Package: scsi-common-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di, scsi-core-modules-2.6.17-2-sparc64-di, cdrom-core-modules-2.6.17-2-sparc64-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
 This package contains very common SCSI drivers for the Linux kernel.

Package: scsi-core-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: scsi-core-modules
Description: Core SCSI subsystem
 This package contains the core SCSI subsystem for the Linux kernel.

Package: scsi-extra-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: scsi-core-modules-2.6.17-2-sparc64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
 This package contains uncommon SCSI drivers for the Linux kernel.
 This includes SCSI RAID drivers, and some of the less common SCSI
 controllers.

Package: silo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 196
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: cdebconf-udeb, base-installer, di-utils-mapdevfs, archdetect
Provides: bootable-system
Description: install silo on a hard disk
 This udeb will install silo on the hard disk.
Installer-Menu-Item: 73

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 300
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: xfs-modules-2.6.17-2-sparc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 728
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-sparc64-di
Provides: xfs-modules
Description: XFS filesystem support
 This package contains the XFS filesystem module for the Linux kernel.

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 256
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: sparc (sparc64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-sparc64
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

installation-report depends on no packages.

Versions of packages installation-report recommends:
pn  pciutils                      <none>     (no description available)
ii  reportbug                     3.31       reports bugs in the Debian distrib

-- no debconf information


--- End Message ---
--- Begin Message ---
Hi,

I managed to get an installation report nested inside a dummy report.
I'm not sure if you can do anything about it or should I just re-submit
the proper report.

Thanks

Richard

-- 
Richard Mortimer <richm@oldelvet.org.uk>


--- End Message ---

Reply to: