Your message dated Sat, 18 Nov 2006 20:26:58 +0100 with message-id <20061118192658.GJ5060@kheops.homeunix.org> and subject line Bug#399237: Etch-rc1 on Thinkpad T60 [SUCCESS] has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: <submit@bugs.debian.org>,<fpiat@klabs.be>
- Subject: Etch-rc1 on Thinkpad T60 [SUCCESS]
- From: "Franklin PIAT" <fpiat@klabs.be>
- Date: Sat, 18 Nov 2006 19:34:31 +0100
- Message-id: <[🔎] E1GlVxP-0000rw-OB@slxmrml1.dmz1.klabs.be>
Package: installation-reports Severity: normal -- Package-specific info: Boot method: network Image version: http://ftp.debian.org/debian/dists/etch/main/installer-i386/rc1/images/netboot/netboot.tar.gz Date: <Date and time of the install> Machine: LENOVO Thinkpad T60 [type 1952] Partitions: <df -Tl will do; the raw partition table is preferred> Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [E] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [ ] Comments/Problems: Successful network installation [PXE netboot]. Everything went smoothly. i had to install ntpdate to adjust clock. (may be laptop laptop clock not properly set before hand.) CPU :SMP: SMP kerney loaded automatically. [OK] CPU :cpufreq: Frequence scalling, just have to enable it [CONFIG,OK] PM :ACPI: power management, add "ibm_acpi" in /etc/modules [CONFIG,OK] PM :suspend: working (sound is restored. BT,WIFI no tested) [OK] PM :hibernation: uswsusp needs reconfiguration [CONFIG,OK] VIDEO:console set "vga=791" [CONFIG,OK] VIDEO:X11: xorg uses i810 driver.Flat pannel working [OK] VIDEO:X11-features: GL=OK ; RANDR=ok; external screen [CONFIG,OK]; KBD :some extrakeys handled [OK] MOUSE:console(gpm): trackpoint and touchpad working [OK] MOUSE:X11: trackpoint and touchpad out of the box [OK] MODEM:needs compilig the module LAN : intel e1000 [OK] WIFI : intel ipw3945 [NON-OFFICIAL; NON-FREE ; OK] IR :needs config, seems ok, not tested. [CONFIG,OK] BT :bluetooth device recognized (not tested, seems ok) [OK] HD :HDAPS doesn't seems recognized, needs testing [??] a howto is available at: http://www.klabs.be/~fpiat/linux/debian/Etch_on_Thinkpad_T60.html -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="3.1 (installer build 20061102)" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux etch 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) lspci -nn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) lspci -nn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) lspci -nn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) lspci -nn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) lspci -nn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 02) lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 02) lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 02) lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 02) lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c4] (rev 02) lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) lspci -nn: 02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a] lspci -nn: 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4227] (rev 02) lspci -nn: 15:00.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56] lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:2017] lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Capabilities: [e0] Vendor Specific Information lspci -vnn: lspci -vnn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:201a] lspci -vnn: Flags: fast devsel, IRQ 11 lspci -vnn: Memory at ee100000 (32-bit, non-prefetchable) [size=512K] lspci -vnn: I/O ports at 1800 [size=8] lspci -vnn: Memory at d0000000 (32-bit, prefetchable) [size=256M] lspci -vnn: Memory at ee200000 (32-bit, non-prefetchable) [size=256K] lspci -vnn: Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- lspci -vnn: Capabilities: [d0] Power Management version 2 lspci -vnn: lspci -vnn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:201a] lspci -vnn: Flags: fast devsel lspci -vnn: Memory at ee180000 (32-bit, non-prefetchable) [size=512K] lspci -vnn: Capabilities: [d0] Power Management version 2 lspci -vnn: lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:2010] lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 11 lspci -vnn: Memory at ee240000 (64-bit, non-prefetchable) [size=16K] lspci -vnn: Capabilities: [50] Power Management version 2 lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- lspci -vnn: Capabilities: [70] Express Unknown type IRQ 0 lspci -vnn: Capabilities: [100] Virtual Channel lspci -vnn: Capabilities: [130] Unknown (5) lspci -vnn: lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 lspci -vnn: I/O behind bridge: 00002000-00002fff lspci -vnn: Memory behind bridge: ee000000-ee0fffff lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0 lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ lspci -vnn: Capabilities: [90] Subsystem: Lenovo Unknown device [17aa:2011] lspci -vnn: Capabilities: [a0] Power Management version 2 lspci -vnn: Capabilities: [100] Virtual Channel lspci -vnn: Capabilities: [180] Unknown (5) lspci -vnn: lspci -vnn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 lspci -vnn: I/O behind bridge: 00003000-00004fff lspci -vnn: Memory behind bridge: ec000000-edffffff lspci -vnn: Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0 lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ lspci -vnn: Capabilities: [90] Subsystem: Lenovo Unknown device [17aa:2011] lspci -vnn: Capabilities: [a0] Power Management version 2 lspci -vnn: Capabilities: [100] Virtual Channel lspci -vnn: Capabilities: [180] Unknown (5) lspci -vnn: lspci -vnn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0 lspci -vnn: I/O behind bridge: 00005000-00006fff lspci -vnn: Memory behind bridge: e8000000-e9ffffff lspci -vnn: Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0 lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ lspci -vnn: Capabilities: [90] Subsystem: Lenovo Unknown device [17aa:2011] lspci -vnn: Capabilities: [a0] Power Management version 2 lspci -vnn: Capabilities: [100] Virtual Channel lspci -vnn: Capabilities: [180] Unknown (5) lspci -vnn: lspci -vnn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0 lspci -vnn: I/O behind bridge: 00007000-00008fff lspci -vnn: Memory behind bridge: ea000000-ebffffff lspci -vnn: Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0 lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ lspci -vnn: Capabilities: [90] Subsystem: Lenovo Unknown device [17aa:2011] lspci -vnn: Capabilities: [a0] Power Management version 2 lspci -vnn: Capabilities: [100] Virtual Channel lspci -vnn: Capabilities: [180] Unknown (5) lspci -vnn: lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 02) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:200a] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 201 lspci -vnn: I/O ports at 1820 [size=32] lspci -vnn: lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 02) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:200a] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 58 lspci -vnn: I/O ports at 1840 [size=32] lspci -vnn: lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 02) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:200a] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 66 lspci -vnn: I/O ports at 1860 [size=32] lspci -vnn: lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 02) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:200a] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 74 lspci -vnn: I/O ports at 1880 [size=32] lspci -vnn: lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:200b] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 74 lspci -vnn: Memory at ee444000 (32-bit, non-prefetchable) [size=1K] lspci -vnn: Capabilities: [50] Power Management version 2 lspci -vnn: Capabilities: [58] Debug port lspci -vnn: lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01) lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Bus: primary=00, secondary=15, subordinate=18, sec-latency=32 lspci -vnn: I/O behind bridge: 00009000-0000cfff lspci -vnn: Memory behind bridge: e4300000-e7ffffff lspci -vnn: Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff lspci -vnn: Capabilities: [50] Subsystem: Lenovo Unknown device [17aa:2013] lspci -vnn: lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:2009] lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: Capabilities: [e0] Vendor Specific Information lspci -vnn: lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c4] (rev 02) (prog-if 80 [Master]) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:200e] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 201 lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at 18b0 [size=16] lspci -vnn: Capabilities: [70] Power Management version 2 lspci -vnn: lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) lspci -vnn: Subsystem: Lenovo Unknown device [17aa:200f] lspci -vnn: Flags: medium devsel, IRQ 11 lspci -vnn: I/O ports at 18e0 [size=32] lspci -vnn: lspci -vnn: 02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a] lspci -vnn: Subsystem: Lenovo Unknown device [17aa:2001] lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 82 lspci -vnn: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] lspci -vnn: I/O ports at 2000 [size=32] lspci -vnn: Capabilities: [c8] Power Management version 2 lspci -vnn: Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ lspci -vnn: Capabilities: [e0] Express Endpoint IRQ 0 lspci -vnn: Capabilities: [100] Advanced Error Reporting lspci -vnn: Capabilities: [140] Device Serial Number 7e-6f-2b-ff-ff-58-15-00 lspci -vnn: lspci -vnn: 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4227] (rev 02) lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:1011] lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 11 lspci -vnn: Memory at edf00000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Capabilities: [c8] Power Management version 2 lspci -vnn: Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- lspci -vnn: Capabilities: [e0] Express Legacy Endpoint IRQ 0 lspci -vnn: Capabilities: [100] Advanced Error Reporting lspci -vnn: Capabilities: [140] Device Serial Number 45-34-4c-ff-ff-02-13-00 lspci -vnn: lspci -vnn: 15:00.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56] lspci -vnn: Subsystem: Lenovo Unknown device [17aa:2012] lspci -vnn: Flags: bus master, medium devsel, latency 168, IRQ 201 lspci -vnn: Memory at e4300000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Bus: primary=15, secondary=16, subordinate=17, sec-latency=176 lspci -vnn: Memory window 0: e0000000-e1fff000 (prefetchable) lspci -vnn: Memory window 1: e6000000-e7fff000 lspci -vnn: I/O window 0: 00009000-000090ff lspci -vnn: I/O window 1: 00009400-000094ff lspci -vnn: 16-bit legacy interface ports at 0001 lspci -vnn: lsmod: Module Size Used by lsmod: qnx4 10484 0 lsmod: ntfs 184468 0 lsmod: nls_iso8859_1 4224 1 lsmod: nls_cp437 5888 1 lsmod: xfs 481140 0 lsmod: reiserfs 210176 0 lsmod: jfs 156124 0 lsmod: ext3 115336 2 lsmod: jbd 45460 1 ext3 lsmod: vfat 11520 1 lsmod: fat 45852 1 vfat lsmod: isofs 31672 0 lsmod: ide_cd 35104 0 lsmod: ide_disk 14976 0 lsmod: ide_generic 1408 0 [permanent] lsmod: aec62xx 6784 0 [permanent] lsmod: alim15x3 11020 0 [permanent] lsmod: amd74xx 12700 0 [permanent] lsmod: atiixp 5520 0 [permanent] lsmod: cmd64x 10140 0 [permanent] lsmod: cs5520 4608 0 [permanent] lsmod: cs5530 4864 0 [permanent] lsmod: cs5535 4224 0 [permanent] lsmod: cy82c693 4356 0 [permanent] lsmod: hpt34x 4992 0 [permanent] lsmod: it821x 7812 0 [permanent] lsmod: ns87415 4168 0 [permanent] lsmod: opti621 4100 0 [permanent] lsmod: pdc202xx_new 7936 0 [permanent] lsmod: pdc202xx_old 9472 0 [permanent] lsmod: piix 9220 0 [permanent] lsmod: rz1000 2688 0 [permanent] lsmod: sc1200 6656 0 [permanent] lsmod: serverworks 8200 0 [permanent] lsmod: siimage 10752 0 [permanent] lsmod: sis5513 12424 0 [permanent] lsmod: slc90e66 5120 0 [permanent] lsmod: triflex 3712 0 [permanent] lsmod: trm290 3972 0 [permanent] lsmod: via82cxxx 8324 0 [permanent] lsmod: usb_storage 69952 0 lsmod: sg 30108 0 lsmod: sr_mod 15780 0 lsmod: cdrom 32288 2 ide_cd,sr_mod lsmod: sd_mod 18448 5 lsmod: generic 4356 0 [permanent] lsmod: ide_core 107940 30 ide_cd,ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,generic lsmod: ata_piix 11524 4 lsmod: libata 60300 1 ata_piix lsmod: scsi_mod 120840 5 usb_storage,sg,sr_mod,sd_mod,libata lsmod: vga16fb 11400 2 lsmod: vgastate 7808 1 vga16fb lsmod: usbserial 28136 0 lsmod: usbhid 35040 0 lsmod: usbkbd 6656 0 lsmod: thermal 12680 0 lsmod: processor 21440 1 thermal lsmod: fan 4484 0 lsmod: pcmcia 33468 0 lsmod: firmware_class 9344 1 pcmcia lsmod: ehci_hcd 26888 0 lsmod: uhci_hcd 19464 0 lsmod: usbcore 108544 7 usb_storage,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd lsmod: e1000 98872 0 lsmod: yenta_socket 23948 1 lsmod: rsrc_nonstatic 11904 1 yenta_socket lsmod: pcmcia_core 36368 3 pcmcia,yenta_socket,rsrc_nonstatic df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 583096 420 582676 0% /dev df: tmpfs 583096 420 582676 0% /dev df: tmpfs 583096 420 582676 0% /.dev df: /dev/scsi/host0/bus0/target0/lun0/part2 6728312 1793128 4593404 28% /target df: /dev/scsi/host0/bus0/target0/lun0/part6 55667648 32 55667616 0% /target/dos df: /dev/scsi/host0/bus0/target0/lun0/part5 6728280 824664 5561836 13% /target/var free: total used free shared buffers free: Mem: 1166192 1141172 25020 0 76620 free: Swap: 979956 416 979540 free: Total: 2146148 1141588 1004560 cardctl status: Socket 0: cardctl status: no card cardctl ident: Socket 0: cardctl ident: no product info available cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 14 /proc/cpuinfo: model name : Genuine Intel(R) CPU T2400 @ 1.83GHz /proc/cpuinfo: stepping : 8 /proc/cpuinfo: cpu MHz : 1828.795 /proc/cpuinfo: cache size : 2048 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 10 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc up pni monitor vmx est tm2 xtpr /proc/cpuinfo: bogomips : 3661.77 /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-006f : keyboard /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : libata /proc/ioports: 01f0-01f7 : libata /proc/ioports: 03c0-03df : vga+ /proc/ioports: 1000-107f : motherboard /proc/ioports: 1000-1003 : PM1a_EVT_BLK /proc/ioports: 1004-1005 : PM1a_CNT_BLK /proc/ioports: 1008-100b : PM_TMR /proc/ioports: 1010-1015 : ACPI CPU throttle /proc/ioports: 1020-1020 : PM2_CNT_BLK /proc/ioports: 1028-102f : GPE0_BLK /proc/ioports: 1180-11bf : motherboard /proc/ioports: 15e0-15ef : motherboard /proc/ioports: 164e-164f : motherboard /proc/ioports: 1800-1807 : 0000:00:02.0 /proc/ioports: 1820-183f : 0000:00:1d.0 /proc/ioports: 1820-183f : uhci_hcd /proc/ioports: 1840-185f : 0000:00:1d.1 /proc/ioports: 1840-185f : uhci_hcd /proc/ioports: 1860-187f : 0000:00:1d.2 /proc/ioports: 1860-187f : uhci_hcd /proc/ioports: 1880-189f : 0000:00:1d.3 /proc/ioports: 1880-189f : uhci_hcd /proc/ioports: 18b0-18bf : 0000:00:1f.2 /proc/ioports: 18b0-18bf : libata /proc/ioports: 18e0-18ff : 0000:00:1f.3 /proc/ioports: 2000-2fff : PCI Bus #02 /proc/ioports: 2000-201f : 0000:02:00.0 /proc/ioports: 2000-201f : e1000 /proc/ioports: 3000-4fff : PCI Bus #03 /proc/ioports: 5000-6fff : PCI Bus #04 /proc/ioports: 7000-8fff : PCI Bus #0c /proc/ioports: 9000-cfff : PCI Bus #15 /proc/ioports: 9000-90ff : PCI CardBus #16 /proc/ioports: 9400-94ff : PCI CardBus #16 /proc/iomem: 00000000-0009ebff : System RAM /proc/iomem: 00000000-00000000 : Crash kernel /proc/iomem: 0009ec00-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000ce800-000cf7ff : Adapter ROM /proc/iomem: 000cf800-000d07ff : Adapter ROM /proc/iomem: 000d2000-000d3fff : reserved /proc/iomem: 000e0000-000effff : Extension ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-7f6dffff : System RAM /proc/iomem: 00100000-0026c0f2 : Kernel code /proc/iomem: 0026c0f3-002f9cef : Kernel data /proc/iomem: 7f6e0000-7f6f2fff : ACPI Tables /proc/iomem: 7f6f3000-7f6fffff : ACPI Non-volatile Storage /proc/iomem: 7f700000-7fffffff : reserved /proc/iomem: d0000000-dfffffff : 0000:00:02.0 /proc/iomem: e0000000-e3ffffff : PCI Bus #15 /proc/iomem: e0000000-e1ffffff : PCI CardBus #16 /proc/iomem: e4000000-e40fffff : PCI Bus #03 /proc/iomem: e4100000-e41fffff : PCI Bus #04 /proc/iomem: e4200000-e42fffff : PCI Bus #0c /proc/iomem: e4300000-e7ffffff : PCI Bus #15 /proc/iomem: e4300000-e4300fff : 0000:15:00.0 /proc/iomem: e4300000-e4300fff : yenta_socket /proc/iomem: e6000000-e7ffffff : PCI CardBus #16 /proc/iomem: e8000000-e9ffffff : PCI Bus #04 /proc/iomem: ea000000-ebffffff : PCI Bus #0c /proc/iomem: ec000000-edffffff : PCI Bus #03 /proc/iomem: edf00000-edf00fff : 0000:03:00.0 /proc/iomem: ee000000-ee0fffff : PCI Bus #02 /proc/iomem: ee000000-ee01ffff : 0000:02:00.0 /proc/iomem: ee000000-ee01ffff : e1000 /proc/iomem: ee100000-ee17ffff : 0000:00:02.0 /proc/iomem: ee180000-ee1fffff : 0000:00:02.1 /proc/iomem: ee200000-ee23ffff : 0000:00:02.0 /proc/iomem: ee240000-ee243fff : 0000:00:1b.0 /proc/iomem: ee444000-ee4443ff : 0000:00:1d.7 /proc/iomem: ee444000-ee4443ff : ehci_hcd /proc/iomem: f0000000-f3ffffff : reserved /proc/iomem: fec00000-fec0ffff : reserved /proc/iomem: fed00000-fed003ff : reserved /proc/iomem: fed14000-fed19fff : reserved /proc/iomem: fed1c000-fed8ffff : reserved /proc/iomem: fee00000-fee00fff : reserved /proc/iomem: ff800000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 1319218 IO-APIC-edge timer /proc/interrupts: 1: 1727 IO-APIC-edge i8042 /proc/interrupts: 9: 44 IO-APIC-level acpi /proc/interrupts: 14: 88643 IO-APIC-edge libata /proc/interrupts: 15: 156 IO-APIC-edge libata /proc/interrupts: 58: 0 IO-APIC-level uhci_hcd:usb2 /proc/interrupts: 66: 0 IO-APIC-level uhci_hcd:usb3 /proc/interrupts: 74: 0 IO-APIC-level uhci_hcd:usb4, ehci_hcd:usb5 /proc/interrupts: 82: 643980 PCI-MSI eth0 /proc/interrupts: 201: 1 IO-APIC-level yenta, uhci_hcd:usb1 /proc/interrupts: NMI: 0 /proc/interrupts: LOC: 157159 /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 1166192 kB /proc/meminfo: MemFree: 24828 kB /proc/meminfo: Buffers: 76620 kB /proc/meminfo: Cached: 970396 kB /proc/meminfo: SwapCached: 92 kB /proc/meminfo: Active: 334312 kB /proc/meminfo: Inactive: 730020 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 1166192 kB /proc/meminfo: LowFree: 24828 kB /proc/meminfo: SwapTotal: 979956 kB /proc/meminfo: SwapFree: 979540 kB /proc/meminfo: Dirty: 4848 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: Mapped: 18872 kB /proc/meminfo: Slab: 65600 kB /proc/meminfo: CommitLimit: 1563052 kB /proc/meminfo: Committed_AS: 21648 kB /proc/meminfo: PageTables: 228 kB /proc/meminfo: VmallocTotal: 122576 kB /proc/meminfo: VmallocUsed: 8692 kB /proc/meminfo: VmallocChunk: 113180 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab54 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: dmidecode: # dmidecode 2.8 dmidecode: SMBIOS 2.4 present. dmidecode: 68 structures occupying 2248 bytes. dmidecode: Table at 0x000E0010. dmidecode: dmidecode: Handle 0x0000, DMI type 0, 24 bytes dmidecode: BIOS Information dmidecode: Vendor: LENOVO dmidecode: Version: 79ET61WW (1.06 ) dmidecode: Release Date: 05/24/2006 dmidecode: Address: 0xDC000 dmidecode: Runtime Size: 144 kB dmidecode: ROM Size: 2048 kB dmidecode: Characteristics: dmidecode: PCI is supported dmidecode: PC Card (PCMCIA) is supported dmidecode: PNP is supported dmidecode: BIOS is upgradeable dmidecode: BIOS shadowing is allowed dmidecode: ESCD support is available dmidecode: Boot from CD is supported dmidecode: Selectable boot is supported dmidecode: BIOS ROM is socketed dmidecode: EDD is supported dmidecode: ACPI is supported dmidecode: USB legacy is supported dmidecode: BIOS boot specification is supported dmidecode: Targeted content distribution is supported dmidecode: BIOS Revision: 1.6 dmidecode: Firmware Revision: 1.4 dmidecode: dmidecode: Handle 0x0001, DMI type 1, 27 bytes dmidecode: System Information dmidecode: Manufacturer: LENOVO dmidecode: Product Name: 1952W5R dmidecode: Version: ThinkPad T60 dmidecode: Serial Number: ##DELETED prior submission## dmidecode: UUID: ##DELETED## dmidecode: Wake-up Type: Power Switch dmidecode: SKU Number: Not Specified dmidecode: Family: ThinkPad T60 dmidecode: dmidecode: Handle 0x0002, DMI type 2, 8 bytes dmidecode: Base Board Information dmidecode: Manufacturer: LENOVO dmidecode: Product Name: 1952W5R dmidecode: Version: Not Available dmidecode: Serial Number: ## DELETED ## dmidecode: dmidecode: Handle 0x0003, DMI type 3, 13 bytes dmidecode: Chassis Information dmidecode: Manufacturer: LENOVO dmidecode: Type: Notebook dmidecode: Lock: Not Present dmidecode: Version: Not Available dmidecode: Serial Number: Not Available dmidecode: Asset Tag: No Asset Information dmidecode: Boot-up State: Unknown dmidecode: Power Supply State: Unknown dmidecode: Thermal State: Unknown dmidecode: Security Status: Unknown dmidecode: dmidecode: Handle 0x0004, DMI type 126, 13 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0005, DMI type 126, 13 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0006, DMI type 4, 35 bytes dmidecode: Processor Information dmidecode: Socket Designation: None dmidecode: Type: Central Processor dmidecode: Family: Pentium M dmidecode: Manufacturer: GenuineIntel dmidecode: ID: E8 06 00 00 FF FB E9 BF dmidecode: Signature: Type 0, Family 6, Model 14, Stepping 8 dmidecode: Flags: dmidecode: FPU (Floating-point unit on-chip) dmidecode: VME (Virtual mode extension) dmidecode: DE (Debugging extension) dmidecode: PSE (Page size extension) dmidecode: TSC (Time stamp counter) dmidecode: MSR (Model specific registers) dmidecode: PAE (Physical address extension) dmidecode: MCE (Machine check exception) dmidecode: CX8 (CMPXCHG8 instruction supported) dmidecode: APIC (On-chip APIC hardware supported) dmidecode: SEP (Fast system call) dmidecode: MTRR (Memory type range registers) dmidecode: PGE (Page global enable) dmidecode: MCA (Machine check architecture) dmidecode: CMOV (Conditional move instruction supported) dmidecode: PAT (Page attribute table) dmidecode: CLFSH (CLFLUSH instruction supported) dmidecode: DS (Debug store) dmidecode: ACPI (ACPI supported) dmidecode: MMX (MMX technology supported) dmidecode: FXSR (Fast floating-point save and restore) dmidecode: SSE (Streaming SIMD extensions) dmidecode: SSE2 (Streaming SIMD extensions 2) dmidecode: SS (Self-snoop) dmidecode: HTT (Hyper-threading technology) dmidecode: TM (Thermal monitor supported) dmidecode: PBE (Pending break enabled) dmidecode: Version: Genuine Intel(R) CPU dmidecode: Voltage: 1.4 V dmidecode: External Clock: 167 MHz dmidecode: Max Speed: 1833 MHz dmidecode: Current Speed: 1833 MHz dmidecode: Status: Populated, Enabled dmidecode: Upgrade: None dmidecode: L1 Cache Handle: 0x000A dmidecode: L2 Cache Handle: 0x000C dmidecode: L3 Cache Handle: Not Provided dmidecode: Serial Number: Not Specified dmidecode: Asset Tag: Not Specified dmidecode: Part Number: Not Specified dmidecode: dmidecode: Handle 0x0007, DMI type 5, 20 bytes dmidecode: Memory Controller Information dmidecode: Error Detecting Method: None dmidecode: Error Correcting Capabilities: dmidecode: None dmidecode: Supported Interleave: One-way Interleave dmidecode: Current Interleave: One-way Interleave dmidecode: Maximum Memory Module Size: 2048 MB dmidecode: Maximum Total Memory Size: 4096 MB dmidecode: Supported Speeds: dmidecode: Other dmidecode: Supported Memory Types: dmidecode: DIMM dmidecode: SDRAM dmidecode: Memory Module Voltage: 2.9 V dmidecode: Associated Memory Slots: 2 dmidecode: 0x0008 dmidecode: 0x0009 dmidecode: Enabled Error Correcting Capabilities: dmidecode: Unknown dmidecode: dmidecode: Handle 0x0008, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM Slot 1 dmidecode: Bank Connections: 0 3 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 1024 MB (Double-bank Connection) dmidecode: Enabled Size: 1024 MB (Double-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x0009, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM Slot 2 dmidecode: Bank Connections: 4 7 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 1024 MB (Double-bank Connection) dmidecode: Enabled Size: 1024 MB (Double-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x000A, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: Internal L1 Cache dmidecode: Configuration: Enabled, Socketed, Level 1 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 64 KB dmidecode: Maximum Size: 64 KB dmidecode: Supported SRAM Types: dmidecode: Synchronous dmidecode: Installed SRAM Type: Synchronous dmidecode: Speed: Unknown dmidecode: Error Correction Type: Single-bit ECC dmidecode: System Type: Instruction dmidecode: Associativity: 8-way Set-associative dmidecode: dmidecode: Handle 0x000B, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: Internal L1 Cache dmidecode: Configuration: Enabled, Socketed, Level 1 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 64 KB dmidecode: Maximum Size: 64 KB dmidecode: Supported SRAM Types: dmidecode: Synchronous dmidecode: Installed SRAM Type: Synchronous dmidecode: Speed: Unknown dmidecode: Error Correction Type: Single-bit ECC dmidecode: System Type: Data dmidecode: Associativity: 8-way Set-associative dmidecode: dmidecode: Handle 0x000C, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: Internal L2 Cache dmidecode: Configuration: Enabled, Socketed, Level 2 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 2048 KB dmidecode: Maximum Size: 2048 KB dmidecode: Supported SRAM Types: dmidecode: Burst dmidecode: Installed SRAM Type: Burst dmidecode: Speed: Unknown dmidecode: Error Correction Type: Single-bit ECC dmidecode: System Type: Unified dmidecode: Associativity: 8-way Set-associative dmidecode: dmidecode: Handle 0x000D, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Infrared dmidecode: External Connector Type: Infrared dmidecode: Port Type: Other dmidecode: dmidecode: Handle 0x000E, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: External Monitor dmidecode: External Connector Type: DB-15 female dmidecode: Port Type: Video Port dmidecode: dmidecode: Handle 0x000F, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Microphone Jack dmidecode: External Connector Type: Mini Jack (headphones) dmidecode: Port Type: Audio Port dmidecode: dmidecode: Handle 0x0010, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Headphone Jack dmidecode: External Connector Type: Mini Jack (headphones) dmidecode: Port Type: Audio Port dmidecode: dmidecode: Handle 0x0011, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0012, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0013, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0014, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Ethernet dmidecode: External Connector Type: RJ-45 dmidecode: Port Type: Network Port dmidecode: dmidecode: Handle 0x0015, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB 1 dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0016, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB 2 dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0017, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Available dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB 3 dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0018, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0019, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x001A, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x001B, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x001C, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x001D, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x001E, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x001F, DMI type 126, 9 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0020, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: ExpressCard Slot 1 dmidecode: Type: x1 PCI Express dmidecode: Current Usage: Available dmidecode: Length: Other dmidecode: Characteristics: dmidecode: Hot-plug devices are supported dmidecode: dmidecode: Handle 0x0021, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: CardBus Slot 1 dmidecode: Type: 32-bit PC Card (PCMCIA) dmidecode: Current Usage: Available dmidecode: Length: Other dmidecode: ID: Adapter 1, Socket 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PC Card-16 is supported dmidecode: Cardbus is supported dmidecode: Zoom Video is supported dmidecode: Modem ring resume is supported dmidecode: PME signal is supported dmidecode: Hot-plug devices are supported dmidecode: dmidecode: Handle 0x0022, DMI type 126, 13 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0023, DMI type 126, 13 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0024, DMI type 126, 13 bytes dmidecode: Inactive dmidecode: dmidecode: Handle 0x0025, DMI type 10, 6 bytes dmidecode: On Board Device Information dmidecode: Type: Other dmidecode: Status: Disabled dmidecode: Description: IBM Embedded Security hardware dmidecode: dmidecode: Handle 0x0026, DMI type 11, 5 bytes dmidecode: OEM Strings dmidecode: String 1: IBM ThinkPad Embedded Controller -[79HT45WW-1.04 ]- dmidecode: dmidecode: Handle 0x0027, DMI type 13, 22 bytes dmidecode: BIOS Language Information dmidecode: Installable Languages: 1 dmidecode: enUS dmidecode: Currently Installed Language: enUS dmidecode: dmidecode: Handle 0x0028, DMI type 15, 25 bytes dmidecode: System Event Log dmidecode: Area Length: 0 bytes dmidecode: Header Start Offset: 0x0000 dmidecode: Header Length: 16 bytes dmidecode: Data Start Offset: 0x0010 dmidecode: Access Method: General-purpose non-volatile data functions dmidecode: Access Address: 0x0000 dmidecode: Status: Valid, Invalid dmidecode: Change Token: 0x000000F7 dmidecode: Header Format: Type 1 dmidecode: Supported Log Type Descriptors: 1 dmidecode: Descriptor 1: POST error dmidecode: Data Format 1: POST results bitmap dmidecode: dmidecode: Handle 0x0029, DMI type 16, 15 bytes dmidecode: Physical Memory Array dmidecode: Location: System Board Or Motherboard dmidecode: Use: System Memory dmidecode: Error Correction Type: None dmidecode: Maximum Capacity: 2 GB dmidecode: Error Information Handle: Not Provided dmidecode: Number Of Devices: 2 dmidecode: dmidecode: Handle 0x002A, DMI type 17, 27 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0029 dmidecode: Error Information Handle: No Error dmidecode: Total Width: 64 bits dmidecode: Data Width: 64 bits dmidecode: Size: 1024 MB dmidecode: Form Factor: SODIMM dmidecode: Set: None dmidecode: Locator: DIMM 1 dmidecode: Bank Locator: Bank 0/1 dmidecode: Type: DDR2 dmidecode: Type Detail: Synchronous dmidecode: Speed: Unknown dmidecode: Manufacturer: Not Specified dmidecode: Serial Number: Not Specified dmidecode: Asset Tag: Not Specified dmidecode: Part Number: Not Specified dmidecode: dmidecode: Handle 0x002B, DMI type 17, 27 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0029 dmidecode: Error Information Handle: No Error dmidecode: Total Width: 64 bits dmidecode: Data Width: 64 bits dmidecode: Size: 1024 MB dmidecode: Form Factor: SODIMM dmidecode: Set: None dmidecode: Locator: DIMM 2 dmidecode: Bank Locator: Bank 2/3 dmidecode: Type: DDR2 dmidecode: Type Detail: Synchronous dmidecode: Speed: Unknown dmidecode: Manufacturer: Not Specified dmidecode: Serial Number: Not Specified dmidecode: Asset Tag: Not Specified dmidecode: Part Number: Not Specified dmidecode: dmidecode: Handle 0x002C, DMI type 18, 23 bytes dmidecode: 32-bit Memory Error Information dmidecode: Type: OK dmidecode: Granularity: Unknown dmidecode: Operation: Unknown dmidecode: Vendor Syndrome: Unknown dmidecode: Memory Array Address: Unknown dmidecode: Device Address: Unknown dmidecode: Resolution: Unknown dmidecode: dmidecode: Handle 0x002D, DMI type 19, 15 bytes dmidecode: Memory Array Mapped Address dmidecode: Starting Address: 0x00000000000 dmidecode: Ending Address: 0x0007FFFFFFF dmidecode: Range Size: 2 GB dmidecode: Physical Array Handle: 0x0029 dmidecode: Partition Width: 0 dmidecode: dmidecode: Handle 0x002E, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00000000000 dmidecode: Ending Address: 0x0003FFFFFFF dmidecode: Range Size: 1 GB dmidecode: Physical Device Handle: 0x002A dmidecode: Memory Array Mapped Address Handle: 0x002D dmidecode: Partition Row Position: 1 dmidecode: dmidecode: Handle 0x002F, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00040000000 dmidecode: Ending Address: 0x0007FFFFFFF dmidecode: Range Size: 1 GB dmidecode: Physical Device Handle: 0x002B dmidecode: Memory Array Mapped Address Handle: 0x002D dmidecode: Partition Row Position: 1 dmidecode: dmidecode: Handle 0x0030, DMI type 21, 7 bytes dmidecode: Built-in Pointing Device dmidecode: Type: Track Point dmidecode: Interface: PS/2 dmidecode: Buttons: 3 dmidecode: dmidecode: Handle 0x0031, DMI type 21, 7 bytes dmidecode: Built-in Pointing Device dmidecode: Type: Touch Pad dmidecode: Interface: PS/2 dmidecode: Buttons: 0 dmidecode: dmidecode: Handle 0x0032, DMI type 24, 5 bytes dmidecode: Hardware Security dmidecode: Power-On Password Status: Disabled dmidecode: Keyboard Password Status: Disabled dmidecode: Administrator Password Status: Disabled dmidecode: Front Panel Reset Status: Unknown dmidecode: dmidecode: Handle 0x0033, DMI type 32, 11 bytes dmidecode: System Boot Information dmidecode: Status: No errors detected dmidecode: dmidecode: Handle 0x0034, DMI type 131, 17 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 83 11 34 00 01 02 03 FF FF 1F 00 00 00 00 00 02 dmidecode: 00 dmidecode: Strings: dmidecode: BOOTINF 20h dmidecode: BOOTDEV 21h dmidecode: KEYPTRS 23h dmidecode: dmidecode: Handle 0x0035, DMI type 131, 11 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 83 0B 35 00 00 00 E8 FF C5 01 01 dmidecode: Strings: dmidecode: IBM System Metrics dmidecode: dmidecode: Handle 0x0036, DMI type 131, 22 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 83 16 36 00 01 00 00 00 00 00 00 00 00 00 00 00 dmidecode: 00 00 00 00 00 01 dmidecode: Strings: dmidecode: TVT-Enablement dmidecode: dmidecode: Handle 0x0037, DMI type 132, 7 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 84 07 37 00 01 D8 36 dmidecode: dmidecode: Handle 0x0038, DMI type 133, 5 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 85 05 38 00 01 dmidecode: Strings: dmidecode: KHOIHGIUCCHHII dmidecode: dmidecode: Handle 0x0039, DMI type 133, 17 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 85 11 39 00 30 30 2E 35 00 60 6F 7F 00 00 00 00 dmidecode: 01 dmidecode: Strings: dmidecode: Audit Boot History dmidecode: dmidecode: Handle 0x003A, DMI type 134, 13 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 86 0D 3A 00 22 06 06 20 00 00 00 00 00 dmidecode: dmidecode: Handle 0x003B, DMI type 134, 16 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 86 10 3B 00 00 41 54 4D 4C 01 01 00 00 02 01 02 dmidecode: Strings: dmidecode: TPM INFO dmidecode: System Reserved dmidecode: dmidecode: Handle 0x003C, DMI type 135, 13 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 87 0D 3C 00 54 50 07 00 01 00 00 00 00 dmidecode: dmidecode: Handle 0x003D, DMI type 135, 18 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 87 12 3D 00 54 50 07 01 01 A3 00 00 00 00 00 00 dmidecode: 00 00 dmidecode: dmidecode: Handle 0x003E, DMI type 135, 35 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 87 23 3E 00 54 50 07 02 42 41 59 20 49 2F 4F 20 dmidecode: 01 00 02 00 00 0E 00 F0 01 F6 03 02 00 0F 00 70 dmidecode: 01 76 03 dmidecode: dmidecode: Handle 0x003F, DMI type 136, 6 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 88 06 3F 00 5A 5A dmidecode: dmidecode: Handle 0x0040, DMI type 137, 26 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 89 1A 40 00 0A 01 00 01 00 00 50 57 4D 53 20 49 dmidecode: 6E 66 6F 72 6D 61 74 69 6F 6E dmidecode: dmidecode: Handle 0x0041, DMI type 138, 40 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 8A 28 41 00 14 01 01 01 07 01 01 0C 01 01 0C 01 dmidecode: 01 0C 00 00 42 49 4F 53 20 50 61 73 73 77 6F 72 dmidecode: 64 20 46 6F 72 6D 61 74 dmidecode: dmidecode: Handle 0x0042, DMI type 139, 37 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 8B 25 42 00 11 01 0A 00 00 00 00 00 00 00 00 00 dmidecode: 00 50 57 4D 53 20 4B 65 79 20 49 6E 66 6F 72 6D dmidecode: 61 74 69 6F 6E dmidecode: dmidecode: Handle 0x0043, DMI type 127, 4 bytes dmidecode: End Of Table dmidecode: ============================================== Installer status: ============================================== Package: input-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: input-modules Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: Input devices support Package: acpi-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: acpi-modules Depends: kernel-image-2.6.17-2-486-di Description: ACPI support modules Package: nic-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-modules Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di Description: Common NIC drivers Package: preseed-common Status: install ok unpacked Version: 1.20 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.29 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6.ds1-4 Description: GNU C Library: NSS helper for DNS - udeb Package: download-installer Status: install ok installed Version: 1.12 Depends: cdebconf-udeb, net-retriever, anna (>= 1.07) Description: Download installer components Installer-Menu-Item: 23 Package: lowmemcheck Status: install ok unpacked Version: 1.21 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: main-menu Status: install ok unpacked Version: 1.15 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.39 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: usb-serial-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: usb-serial-modules Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: USB serial drivers Package: nic-extra-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-extra-modules Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di Description: Rare NIC drivers Package: di-utils Status: install ok installed Version: 1.39 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Miscellaneous utilities for the debian installer Package: usb-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: usb-modules Depends: kernel-image-2.6.17-2-486-di Description: USB support Package: choose-mirror Status: install ok installed Version: 2.08 Depends: configured-network, choose-mirror-bin Description: Choose mirror to install from (menu item) Installer-Menu-Item: 23 Package: scsi-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: scsi-core-modules Depends: kernel-image-2.6.17-2-486-di Description: Core SCSI subsystem Package: network-preseed Status: install ok unpacked Version: 1.20 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: crc-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: crc-modules Depends: kernel-image-2.6.17-2-486-di Description: CRC modules Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.108 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: module-init-tools-udeb Status: install ok unpacked Version: 3.2.2-3 Depends: libc6 (>= 2.3.6-6) Description: tools for managing Linux kernel modules Package: rootskel Status: install ok installed Version: 1.40 Depends: di-utils (>= 1.24), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: firmware-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: firmware-modules Depends: kernel-image-2.6.17-2-486-di Description: Firmware request modules Package: udev-udeb Status: install ok unpacked Version: 0.100-2.2 Depends: libc6 (>= 2.3.6-6) Description: /dev/ and hotplug management daemon Package: fb-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: fb-modules Depends: kernel-image-2.6.17-2-486-di Description: Frame buffer support Package: brltty-udeb Status: install ok unpacked Version: 3.7.2-4 Depends: libc6 (>= 2.3.6-6) Description: Access software for a blind person using a soft braille terminal Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6 (>= 2.3.6-6) Description: Free Implementation of the Unicode BiDi algorithm Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6 (>= 2.3.6-6) Description: text-wrapping library with i18n - runtime udeb Package: pcmcia-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: pcmcia-modules Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Description: Common PCMCIA drivers Package: auto-install Status: install ok unpacked Version: 0.02 Depends: netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 19 Package: usb-discover Status: install ok unpacked Version: 1.06 Depends: cdebconf-udeb Description: Discover USB and load kernel modules Package: serial-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: serial-modules Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Description: Serial drivers Package: rescue-check Status: install ok unpacked Version: 1.7 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: cdebconf-udeb Status: install ok installed Version: 0.108 Provides: debconf-2.0 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: ai-choosers Status: install ok unpacked Version: 0.02 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 22 Package: floppy-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: floppy-modules Depends: kernel-image-2.6.17-2-486-di Description: Floppy driver Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.108 Depends: cdebconf-udeb, libc6 (>= 2.3.6-6) Description: Plain text frontend for Debian Configuration Management System Package: firewire-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: firewire-core-modules Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di Description: Core FireWire drivers Package: iso-3166-udeb Status: install ok installed Version: 0.57-1 Description: provides iso_3166.tab file Package: floppy-retriever Status: install ok unpacked Version: 1.11 Provides: retriever Depends: cdebconf-udeb, mountfloppy Description: Fetches modules from a floppy Package: ethdetect Status: install ok installed Version: 1.43 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 18 Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-3 Depends: libc6 (>= 2.3.6-6) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.20 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: net-retriever Status: install ok installed Version: 1.12 Provides: retriever Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16) Description: Fetch modules from the Internet Package: archdetect Status: install ok installed Version: 1.43 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45) Description: Hardware architecture detector Package: nic-pcmcia-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-pcmcia-modules Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Description: Common PCMCIA NIC drivers Package: save-logs Status: install ok unpacked Version: 2.23 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.39 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.25 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: libsysfs2-udeb Status: install ok unpacked Version: 2.0.0-7 Provides: libsysfs2 Depends: libc6 (>= 2.3.6-6) Description: interface library to sysfs Package: choose-mirror-bin Status: install ok installed Version: 2.08 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Choose mirror to install from (program) Package: pcmciautils-udeb Status: install ok unpacked Version: 014-2 Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb Description: PCMCIA utilities for Linux 2.6 Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.4~pre4-1 Depends: libc6 (>= 2.3.6-6) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.01-1 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.39 Description: Terminfo entries needed by newt/slang in debian installer Package: hw-detect Status: install ok installed Version: 1.43 Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.31 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.45 Depends: libc6 (>= 2.3.6-6) Description: Library of common debian-installer functions Package: installation-locale Status: install ok unpacked Version: 1.1 Depends: rootskel Description: UTF-8 C locale Package: nic-shared-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-shared-modules Depends: kernel-image-2.6.17-2-486-di Description: Shared NIC drivers Package: env-preseed Status: install ok unpacked Version: 1.20 Description: debconf preseeding via environment variables Package: mountfloppy Status: install ok unpacked Version: 0.8 Depends: cdebconf-udeb, di-utils (>= 1.15) Description: Mounts a floppy Package: cdebconf-priority Status: install ok unpacked Version: 0.108 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: fat-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: fat-modules Depends: kernel-image-2.6.17-2-486-di Description: FAT filesystem support Package: netcfg Status: install ok installed Version: 1.31 Provides: configured-network Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection Description: Configure the network Installer-Menu-Item: 18 Package: dhcp-client-udeb Status: install ok installed Version: 2.0pl5-19.4 Depends: libc6 (>= 2.3.5-1) Description: DHCP Client for debian-installer Package: libdebconfclient0-udeb Status: install ok installed Version: 0.108 Depends: libc6 (>= 2.3.6-6), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.5 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: kernel-image-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: debian-installer Status: install ok installed Version: netboot-20061102 Description: debian installation image Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 152 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.16 Depends: choose-mirror-bin, cdebconf-udeb Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 100 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.16 Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 596 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.68 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19) Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: cdrom-core-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 140 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di Provides: cdrom-core-modules Description: CDROM support This package contains core CDROM support for the Linux kernel. Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 72 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.12 Depends: cdebconf-udeb, os-prober, tzsetup-udeb Description: set up clock Installer-Menu-Item: 62 Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 168 Maintainer: Anthony Towns <ajt@debian.org> Version: 0.3.3 Depends: libc6 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: dhcp3-client-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 416 Maintainer: Eloy A. Paris <peloy@debian.org> Version: 3.0.4-10 Depends: libc6 (>= 2.3.6-6) Description: DHCP Client for debian-installer dhcp-client-udeb is a minimal dhcp package used by the debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 16 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.39 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 60 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.43 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: dmidecode-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 60 Maintainer: Petter Reinholdtsen <pere@debian.org> Version: 2.8-2 Depends: libc6 (>= 2.3.5-1) Description: Dump Desktop Management Interface data (udeb) Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 356 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-2 Depends: libblkid1-udeb, libc6 (>= 2.3.6-6) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: elilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 96 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.7 Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install elilo on a hard disk This udeb will install elilo on the hard disk. Installer-Menu-Item: 76 Package: ext3-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 236 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fdisk-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 136 Maintainer: LaMont Jones <lamont@debian.org> Version: 2.12r-12 Depends: libc6 (>= 2.3.6-6) Description: Partition a hard drive (manual) fdisk package Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.5 Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system Provides: prebaseconfig Description: Finish the installation and reboot Installer-Menu-Item: 78 Package: grub-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 356 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.19 Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install GRUB on a hard disk Installer-Menu-Item: 73 Package: ide-core-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ide-core-modules Description: IDE support This package contains core IDE support for the Linux kernel. Package: ide-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 420 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di Provides: ide-modules Description: IDE drivers This package contains IDE drivers for the Linux kernel. Package: jfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 212 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: jfs-modules Description: JFS filesystem support This package contains the JFS filesystem module for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 984 Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de> Version: 1.1.11-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-2 Depends: libc6 (>= 2.3.6-6) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 1584 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.3.6.ds1-7 Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 52 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2:1.02.08-1 Depends: libc6 (>= 2.3.6-6) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 328 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-2.1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libslang2-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 648 Maintainer: Alastair McKinstry <mckinstry@debian.org> Version: 2.0.6-4 Depends: libc-udeb Description: S-Lang library for Debian Installer This is a udeb, or a microdeb, of the S-Lang library with wide charater support. As such it is the installer counterpart of libslang2. You only need this package to support applications needing S-Lang during the Debian installation process time and probably don't need to select it. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 24 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-2 Depends: libc6 (>= 2.3.6-6) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: lilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 220 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.18 Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install LILO on a hard disk Installer-Menu-Item: 75 Package: loop-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 428 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2.02.06-3 Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 348 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 176 Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org> Version: 2.5.5-1 Depends: libc6 (>= 2.3.6-6) Description: tool to administer Linux MD arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD arrays (e.g. software RAID, multipath devices). . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 384 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.19 Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Ed Boraas <ed@debian.org> Version: 1:3.6.19-4 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: nano-udeb Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 64 Maintainer: Jordi Mallach <jordi@debian.org> Version: 1.9.99pre3-1 Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3) Provides: editor Description: free Pico clone with some new features - tiny build GNU nano is a free replacement for Pico, the default Pine editor. Pine is copyrighted under a restrictive licence, that makes it unsuitable for Debian's main section. GNU nano is an effort to provide a Pico-like editor, but also includes some features that were missing in the original, such as 'search and replace', 'goto line' or internationalization support. . This package contains a minimal build of GNU nano, aimed for use in debian-installer. Thus, many features are disabled in this version. Package: nic-usb-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 188 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Provides: nic-usb-modules Description: USB NIC drivers This package contains USB network adapter drivers for the Linux kernel. Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.13 Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 77 Package: ntfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 244 Maintainer: David MartÃnez Moreno <ender@debian.org> Version: 1.13.1-4 Depends: libc6 (>= 2.3.6-6) Provides: ntfstools-udeb Description: Tools for doing neat things in NTFS partitions from Linux - udeb Currently this udeb contains only ntfsresize. Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.14 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: parport-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 116 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: parport-modules Description: Parallel port support This package contains parallel port drivers for the Linux kernel. Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.19 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1) Description: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 60 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-2.1 Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 356 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 60 Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 3 Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87) Description: Automatically partition storage devices using crypto and LVM Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 148 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 18 Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb Description: Automatically partition storage devices using LVM Package: partman-auto-raid Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2 Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md Description: Allow preseeded RAID installs Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 848 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 97 Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab Description: Partition the storage devices (partman) Installer-Menu-Item: 42 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 576 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 49 Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 124 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 32 Depends: cdebconf-udeb Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 856 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 17 Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb Description: Add to partman support for block device encryption Package: partman-efi Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 11 Depends: partman-base Description: Add to partman support for EFI boot partitions Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 220 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 43 Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 260 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 18 Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 680 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 47 Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb Description: Adds support for LVM to partman Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 156 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 30 Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87) Description: Add to partman support for MD Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 364 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 44 Depends: ntfsprogs-udeb, cdebconf-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 228 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 32 Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 304 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 46 Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 216 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 30 Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for xfs Package: pcmcia-storage-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Provides: pcmcia-storage-modules Description: PCMCIA storage drivers This package contains PCMCIA storage drivers for the Linux kernel. Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 28 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.10 Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 70 Package: reiserfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 268 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: reiserfs-modules Description: Reiser filesystem support This package contains the Reiser filesystem module for the Linux kernel. Package: sata-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 352 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di Provides: sata-modules Description: SATA drivers This package contains SATA drivers for the Linux kernel. Package: scsi-common-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 704 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di Provides: scsi-common-modules Description: Very common SCSI drivers This package contains very common SCSI drivers for the Linux kernel. Package: scsi-extra-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1316 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di Provides: scsi-extra-modules Description: Uncommon SCSI drivers This package contains uncommon SCSI drivers for the Linux kernel. This includes SCSI RAID drivers, and some of the less common SCSI controllers. Package: scsi-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1020 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Provides: scsi-modules Description: SCSI drivers This package contains SCSI drivers for the Linux kernel. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 292 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.12 Depends: cdebconf-udeb, localechooser Description: choose timezone Installer-Menu-Item: 62 Package: usb-storage-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Provides: usb-storage-modules Description: USB storage support This package contains the USB storage driver for the Linux kernel. Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 336 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.7 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 63 Package: xfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 568 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: xfs-modules Description: XFS filesystem support This package contains the XFS filesystem module for the Linux kernel. Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 232 Maintainer: Nathan Scott <nathans@debian.org> Version: 2.8.11-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: ntfs-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 248 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ntfs-modules Description: NTFS filesystem support This package contains the NTFS file system module for the Linux kernel. Package: qnx4-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: qnx4-modules Description: QNX4 filesystem support This package contains the QNX4 filesystem module for the Linux kernel. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
--- End Message ---
--- Begin Message ---
- To: Franklin PIAT <fpiat@klabs.be>, 399237-done@bugs.debian.org
- Subject: Re: Bug#399237: Etch-rc1 on Thinkpad T60 [SUCCESS]
- From: Christian Perrier <bubulle@debian.org>
- Date: Sat, 18 Nov 2006 20:26:58 +0100
- Message-id: <20061118192658.GJ5060@kheops.homeunix.org>
- In-reply-to: <[🔎] E1GlVxP-0000rw-OB@slxmrml1.dmz1.klabs.be>
- References: <[🔎] E1GlVxP-0000rw-OB@slxmrml1.dmz1.klabs.be>
Given that your installation was a complete success, I do as usual with reports for successful installations: I close the bug..:-) This does not of course mean you weren't right to report. Knowing the installations are correct is important for the d-i team. Many thanks for your time testing the Debian Installer and reporting your results. Have fun with your new Debian system!Attachment: signature.asc
Description: Digital signature
--- End Message ---