Bug#397394: Raid / boot time / cd / have driver / help
Package: installation-reports
Boot method: CD
Image version:
http://mirrors.telianet.dk/pub/mirrors/cdimage.debian.org/3.1_r3/i386/iso-cd/
Date: 05. november 2006
Machine: Shuttle SB36
Processor: Intel 4, 3.4Ghz
Memory: 2 GB memory (Dual)
Partitions: 2*320 GB (Raid 1),
Output of lspci and lspci -n: ?
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E], Could not find my network card
Config network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: [ ]
Mount partitions: [E]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Well my problem is that the system do not support Raid on the installation
cd, I have drivers for the raid, but do not know how to install the driver
(raid driver) at boot time. So my system fails every time it looks for the
disks when it wants to install or look at the partition.
Hardware:
XPC SD36G5:
Chipset: Intel 945G (lakeport-g) +Ich7 DH
cd: plextor
Bios: Award V6.0PG, 4 mb flash
Socket: 775 (T)
Proc: Pentium D (Dual core, presler) 945, 3,4Ghz, 800mhz FSB
Grafik: Intel Graphics media accellerator 950 (max 224 mb shared), 333mhz,
DX8,9 support, DVMT 3
Memory: Kingston DDR2-667, 2*1024Mb, Cas 5 (Dual)
Audio: 7.1 ch HD, Realtek ALC882
Power supply: Silent X 250 w.
Networkcard: Intel 82573L (Gigabit), RJ45
Firewire: IEEE 1394, VIA VT6307, 400mb sec, 1 front, 1 bag
Harddiske: WD Caviar RE 3200YS, 320GB, Sata ll (2 stk), Raid 1, 3gb sec
Tv kort: Hauppauge WinTV PVR 500MCE kit (PCI 32 bit)
Allan.Foght@dk.ibm.com
This transmission is intended solely for the person or entity to whom it is
addressed. It may contain privileged and confidential information. If you
are not the intended recipient, please be notified that any dissemination,
distribution or copying is strictly prohibited. If you have received this
transmission by mistake, please let us know and then delete it from your
system.
Reply to: