[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#395452: [ia64] HP rx2600 w/ 20061025 daily



Package: installation-reports

Boot method: Netinst CD
Image version: 20061025 daily
Date: Thu, 26 Oct 2006 21:04:11 -0600

Machine: HP rx2600
Processor: Itanium II (ia64)
Memory: 12G
Partitions: 
debian:~# df -Tl
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/sda2     ext3    68496816    824260  64193116   2% /
udev         tmpfs       10240       128     10112   2% /dev
devshm       tmpfs     6250224         0   6250224   0% /dev/shm

Output of lspci and lspci -n:
debian:~# lspci
00:01.0 USB Controller: NEC Corporation USB (rev 41)
00:01.1 USB Controller: NEC Corporation USB (rev 41)
00:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
00:02.0 IDE interface: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller (rev 02)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 0d)
20:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
20:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
20:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
e0:01.0 Communication controller: Hewlett-Packard Company Auxiliary Diva Serial Port (rev 01)
e0:01.1 Serial controller: Hewlett-Packard Company Diva Serial [GSP] Multiport UART (rev 03)
e0:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
debian:~# lspci -n
00:01.0 0c03: 1033:0035 (rev 41)
00:01.1 0c03: 1033:0035 (rev 41)
00:01.2 0c03: 1033:00e0 (rev 02)
00:02.0 0101: 1095:0649 (rev 02)
00:03.0 0200: 8086:1229 (rev 0d)
20:01.0 0100: 1000:0030 (rev 07)
20:01.1 0100: 1000:0030 (rev 07)
20:02.0 0200: 14e4:1645 (rev 15)
e0:01.0 0780: 103c:1290 (rev 01)
e0:01.1 0700: 103c:1048 (rev 03)
e0:02.0 0300: 1002:5159

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

worked great

-- 
dann frazier | HP Open Source and Linux Organization



Reply to: