--- Begin Message ---
Package: installation-reports
Version: 2.20
Severity: wishlist
-- Package-specific info:
Boot method: CD
Image version: cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-businesscard.iso (2006-10-20)
Date: <Date and time of the install>
Machine: Intel D850MV motherboard (RDRAM, IDE)
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda7 reiserfs 4883556 379204 4504352 8% /
tmpfs tmpfs 778316 0 778316 0% /lib/init/rw
udev tmpfs 10240 84 10156 1% /dev
tmpfs tmpfs 778316 0 778316 0% /dev/shm
/dev/hdd iso9660 33534 33534 0 100% /media/cdrom0
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [ ]
Overall install: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
used "expertgui -vga=795". No problems noticed. Have not seen tmpfs mounted on /lib/init/rw
before. found in /etc/init.d/checkroot.sh that this is mounted if problems with /etc/fstab
not matching root filesystem. I cannot find anything wrong with /etc/fstab included below.
Did not see any errors during bootup. It is first use of reiserfs, maybe this is normal
for that filesystem?
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda7 / reiserfs notail 0 1
/dev/hda1 none swap sw 0 0
/dev/hdd /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/hdc /media/cdrom1 udf,iso9660 user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061020)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux debian 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH)
lspci -v -t: +-01.0-[0000:01]----00.0 ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
lspci -v -t: +-1e.0-[0000:02]--+-08.0 Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller
lspci -v -t: | +-0a.0 ATI Technologies Inc RV280 [Radeon 9200 PRO]
lspci -v -t: | +-0a.1 ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary)
lspci -v -t: | \-0d.0 Agere Systems LT WinModem
lspci -v -t: +-1f.0 Intel Corporation 82801BA ISA Bridge (LPC)
lspci -v -t: +-1f.1 Intel Corporation 82801BA IDE U100
lspci -v -t: +-1f.2 Intel Corporation 82801BA/BAM USB (Hub #1)
lspci -v -t: +-1f.3 Intel Corporation 82801BA/BAM SMBus
lspci -v -t: +-1f.4 Intel Corporation 82801BA/BAM USB (Hub #2)
lspci -v -t: \-1f.5 Intel Corporation 82801BA/BAM AC'97 Audio
lspci -n: 00:00.0 0600: 8086:2530 (rev 04)
lspci -n: 00:01.0 0604: 8086:2532 (rev 04)
lspci -n: 00:1e.0 0604: 8086:244e (rev 04)
lspci -n: 00:1f.0 0601: 8086:2440 (rev 04)
lspci -n: 00:1f.1 0101: 8086:244b (rev 04)
lspci -n: 00:1f.2 0c03: 8086:2442 (rev 04)
lspci -n: 00:1f.3 0c05: 8086:2443 (rev 04)
lspci -n: 00:1f.4 0c03: 8086:2444 (rev 04)
lspci -n: 00:1f.5 0401: 8086:2445 (rev 04)
lspci -n: 01:00.0 0300: 1002:514c
lspci -n: 02:08.0 0200: 8086:2449 (rev 03)
lspci -n: 02:0a.0 0300: 1002:5960 (rev 01)
lspci -n: 02:0a.1 0380: 1002:5940 (rev 01)
lspci -n: 02:0d.0 0780: 11c1:044c (rev 02)
lspci -v: 00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Memory at e0000000 (32-bit, prefetchable) [size=256M]
lspci -v: Capabilities: [a0] AGP version 2.0
lspci -v:
lspci -v: 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 32
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -v: I/O behind bridge: 0000c000-0000cfff
lspci -v: Memory behind bridge: ff800000-ff8fffff
lspci -v: Prefetchable memory behind bridge: 9e900000-be9fffff
lspci -v:
lspci -v: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
lspci -v: I/O behind bridge: 0000d000-0000dfff
lspci -v: Memory behind bridge: ff900000-ff9fffff
lspci -v: Prefetchable memory behind bridge: bea00000-deafffff
lspci -v:
lspci -v: 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v:
lspci -v: 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04) (prog-if 80 [Master])
lspci -v: Subsystem: Intel Corporation Unknown device 4d44
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: I/O ports at ffa0 [size=16]
lspci -v:
lspci -v: 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 04)
lspci -v: Subsystem: Intel Corporation Unknown device 4d44
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -v: I/O ports at ef40 [size=32]
lspci -v:
lspci -v: 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04)
lspci -v: Subsystem: Intel Corporation Unknown device 4d44
lspci -v: Flags: medium devsel, IRQ 9
lspci -v: I/O ports at efa0 [size=16]
lspci -v:
lspci -v: 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 04)
lspci -v: Subsystem: Intel Corporation Unknown device 4d44
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -v: I/O ports at ef80 [size=32]
lspci -v:
lspci -v: 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 04)
lspci -v: Subsystem: Intel Corporation Unknown device 4d44
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 9
lspci -v: I/O ports at e800 [size=256]
lspci -v: I/O ports at ef00 [size=64]
lspci -v:
lspci -v: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
lspci -v: Subsystem: ATI Technologies Inc Unknown device 0f2a
lspci -v: Flags: stepping, 66MHz, medium devsel, IRQ 12
lspci -v: Memory at a0000000 (32-bit, prefetchable) [disabled] [size=256M]
lspci -v: I/O ports at c800 [disabled] [size=256]
lspci -v: Memory at ff8f0000 (32-bit, non-prefetchable) [disabled] [size=64K]
lspci -v: Expansion ROM at ff8c0000 [disabled] [size=128K]
lspci -v: Capabilities: [58] AGP version 2.0
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 02:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device 3013
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -v: Memory at ff9ef000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at df00 [size=64]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 02:0a.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
lspci -v: Subsystem: PC Partner Limited Unknown device 0250
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 11
lspci -v: Memory at d0000000 (32-bit, prefetchable) [size=128M]
lspci -v: I/O ports at d800 [size=256]
lspci -v: Memory at ff9f0000 (32-bit, non-prefetchable) [size=64K]
lspci -v: Expansion ROM at bea00000 [disabled] [size=128K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 02:0a.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
lspci -v: Subsystem: PC Partner Limited Unknown device 0251
lspci -v: Flags: bus master, medium devsel, latency 32
lspci -v: Memory at c8000000 (32-bit, prefetchable) [size=128M]
lspci -v: Memory at ff9b0000 (32-bit, non-prefetchable) [size=64K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 02:0d.0 Communication controller: Agere Systems LT WinModem (rev 02)
lspci -v: Subsystem: Agere Systems LT WinModem
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 3
lspci -v: Memory at ff9eec00 (32-bit, non-prefetchable) [size=256]
lspci -v: I/O ports at dff0 [size=8]
lspci -v: I/O ports at d400 [size=256]
lspci -v: Capabilities: [f8] Power Management version 2
lspci -v:
lspci -x: 00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
lspci -x: 00: 86 80 30 25 06 01 90 20 04 00 00 06 00 00 00 00
lspci -x: 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
lspci -x: 00: 86 80 32 25 07 01 a0 00 04 00 04 06 00 20 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 c0 a0 02
lspci -x: 20: 80 ff 80 ff 90 9e 90 be 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
lspci -x:
lspci -x: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
lspci -x: 00: 86 80 4e 24 07 01 80 00 04 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
lspci -x: 20: 90 ff 90 ff a0 be a0 de 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00
lspci -x:
lspci -x: 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
lspci -x: 00: 86 80 40 24 0f 00 80 02 04 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04)
lspci -x: 00: 86 80 4b 24 05 00 80 02 04 80 01 01 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: a1 ff 00 00 00 00 00 00 00 00 00 00 86 80 44 4d
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 04)
lspci -x: 00: 86 80 42 24 05 00 80 02 04 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 ef 00 00 00 00 00 00 00 00 00 00 86 80 44 4d
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00
lspci -x:
lspci -x: 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04)
lspci -x: 00: 86 80 43 24 01 00 80 02 04 00 05 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: a1 ef 00 00 00 00 00 00 00 00 00 00 86 80 44 4d
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00
lspci -x:
lspci -x: 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 04)
lspci -x: 00: 86 80 44 24 05 00 80 02 04 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 ef 00 00 00 00 00 00 00 00 00 00 86 80 44 4d
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
lspci -x:
lspci -x: 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 04)
lspci -x: 00: 86 80 45 24 05 00 80 02 04 00 01 04 00 00 00 00
lspci -x: 10: 01 e8 00 00 01 ef 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 44 4d
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00
lspci -x:
lspci -x: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
lspci -x: 00: 02 10 4c 51 80 00 b0 02 00 00 00 03 08 20 00 00
lspci -x: 10: 08 00 00 a0 01 c8 00 00 00 00 8f ff 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 2a 0f
lspci -x: 30: 00 00 8c ff 58 00 00 00 00 00 00 00 0c 01 08 00
lspci -x:
lspci -x: 02:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
lspci -x: 00: 86 80 49 24 17 01 90 02 03 00 00 02 08 20 00 00
lspci -x: 10: 00 f0 9e ff 01 df 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 13 30
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38
lspci -x:
lspci -x: 02:0a.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
lspci -x: 00: 02 10 60 59 07 01 90 02 01 00 00 03 08 20 80 00
lspci -x: 10: 08 00 00 d0 01 d8 00 00 00 00 9f ff 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 50 02
lspci -x: 30: 00 00 9c ff 50 00 00 00 00 00 00 00 0b 01 08 00
lspci -x:
lspci -x: 02:0a.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
lspci -x: 00: 02 10 40 59 07 00 90 02 01 00 80 03 08 20 00 00
lspci -x: 10: 08 00 00 c8 00 00 9b ff 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 51 02
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00
lspci -x:
lspci -x: 02:0d.0 Communication controller: Agere Systems LT WinModem (rev 02)
lspci -x: 00: c1 11 4c 04 07 01 90 02 02 00 80 07 00 20 00 00
lspci -x: 10: 00 ec 9e ff f1 df 00 00 01 d4 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 40 00 00 00 c1 11 4c 04
lspci -x: 30: 00 00 00 00 f8 00 00 00 00 00 00 00 03 01 fc 0e
lspci -x:
lsmod: Module Size Used by
lsmod: nls_cp437 5888 0
lsmod: qnx4 10484 0
lsmod: ntfs 184468 0
lsmod: xfs 481140 0
lsmod: reiserfs 210176 1
lsmod: jfs 156124 0
lsmod: ext3 115336 0
lsmod: jbd 45460 1 ext3
lsmod: vfat 11520 0
lsmod: fat 45852 1 vfat
lsmod: e100 31108 0
lsmod: eepro100 27920 0
lsmod: mii 5248 2 e100,eepro100
lsmod: nls_iso8859_1 4224 1
lsmod: isofs 31672 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: pdc202xx_new 7936 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12700 0 [permanent]
lsmod: atiixp 5520 0 [permanent]
lsmod: cmd64x 10140 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_old 9472 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8200 0 [permanent]
lsmod: siimage 10752 0 [permanent]
lsmod: sis5513 12424 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: floppy 52868 0
lsmod: usb_storage 69952 0
lsmod: scsi_mod 120840 1 usb_storage
lsmod: psmouse 34184 0
lsmod: vga16fb 11400 0
lsmod: vgastate 7808 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbkbd 6656 0
lsmod: usbhid 35040 0
lsmod: usbmouse 5376 0
lsmod: thermal 12680 0
lsmod: processor 21440 1 thermal
lsmod: fan 4484 0
lsmod: ide_cd 35104 0
lsmod: cdrom 32288 1 ide_cd
lsmod: ide_disk 14976 3
lsmod: generic 4356 0 [permanent]
lsmod: evdev 8960 2
lsmod: uhci_hcd 19464 0
lsmod: piix 9220 0 [permanent]
lsmod: ide_core 107940 30 ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,generic,piix
lsmod: usbcore 108544 7 usb_storage,usbserial,usbkbd,usbhid,usbmouse,uhci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 583080 456 582624 0% /dev
df: tmpfs 583080 456 582624 0% /dev
df: tmpfs 583080 456 582624 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part7 4883556 346720 4536836 7% /target
free: total used free shared buffers
free: Mem: 1166164 493020 673144 0 36172
free: Swap: 1951856 0 1951856
free: Total: 3118020 493020 2625000
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 2
/proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 1.80GHz
/proc/cpuinfo: stepping : 4
/proc/cpuinfo: cpu MHz : 1794.743
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up
/proc/cpuinfo: bogomips : 3593.34
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 0400-047f : 0000:00:1f.0
/proc/ioports: 0400-0403 : PM1a_EVT_BLK
/proc/ioports: 0404-0405 : PM1b_CNT_BLK
/proc/ioports: 0408-040b : PM_TMR
/proc/ioports: 0410-0415 : ACPI CPU throttle
/proc/ioports: 0428-042b : GPE0_BLK
/proc/ioports: 042c-042f : GPE1_BLK
/proc/ioports: 0500-053f : 0000:00:1f.0
/proc/ioports: 0884-0885 : PM1a_CNT_BLK
/proc/ioports: c000-cfff : PCI Bus #01
/proc/ioports: c800-c8ff : 0000:01:00.0
/proc/ioports: d000-dfff : PCI Bus #02
/proc/ioports: d400-d4ff : 0000:02:0d.0
/proc/ioports: d800-d8ff : 0000:02:0a.0
/proc/ioports: df00-df3f : 0000:02:08.0
/proc/ioports: df00-df3f : eepro100
/proc/ioports: dff0-dff7 : 0000:02:0d.0
/proc/ioports: e800-e8ff : 0000:00:1f.5
/proc/ioports: ef00-ef3f : 0000:00:1f.5
/proc/ioports: ef40-ef5f : 0000:00:1f.2
/proc/ioports: ef40-ef5f : uhci_hcd
/proc/ioports: ef80-ef9f : 0000:00:1f.4
/proc/ioports: ef80-ef9f : uhci_hcd
/proc/ioports: efa0-efaf : 0000:00:1f.3
/proc/ioports: ffa0-ffaf : 0000:00:1f.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-00097bff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 00097c00-00097fff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000ccfff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-5ffbffff : System RAM
/proc/iomem: 00100000-0026c0f2 : Kernel code
/proc/iomem: 0026c0f3-002f9cef : Kernel data
/proc/iomem: 5ffc0000-5fff7fff : ACPI Tables
/proc/iomem: 5fff8000-5fffffff : ACPI Non-volatile Storage
/proc/iomem: 9e900000-be9fffff : PCI Bus #01
/proc/iomem: a0000000-afffffff : 0000:01:00.0
/proc/iomem: bea00000-deafffff : PCI Bus #02
/proc/iomem: bea00000-bea1ffff : 0000:02:0a.0
/proc/iomem: c8000000-cfffffff : 0000:02:0a.1
/proc/iomem: d0000000-d7ffffff : 0000:02:0a.0
/proc/iomem: d0000000-d0ffffff : vesafb
/proc/iomem: e0000000-efffffff : 0000:00:00.0
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ff800000-ff8fffff : PCI Bus #01
/proc/iomem: ff8c0000-ff8dffff : 0000:01:00.0
/proc/iomem: ff8f0000-ff8fffff : 0000:01:00.0
/proc/iomem: ff900000-ff9fffff : PCI Bus #02
/proc/iomem: ff9b0000-ff9bffff : 0000:02:0a.1
/proc/iomem: ff9eec00-ff9eecff : 0000:02:0d.0
/proc/iomem: ff9ef000-ff9effff : 0000:02:08.0
/proc/iomem: ff9ef000-ff9effff : eepro100
/proc/iomem: ff9f0000-ff9fffff : 0000:02:0a.0
/proc/iomem: ffb80000-ffbfffff : reserved
/proc/iomem: fff00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1386489 IO-APIC-edge timer
/proc/interrupts: 1: 1039 IO-APIC-edge i8042
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 17357 IO-APIC-edge ide0
/proc/interrupts: 15: 1567 IO-APIC-edge ide1
/proc/interrupts: 169: 0 IO-APIC-level uhci_hcd:usb1
/proc/interrupts: 177: 759 IO-APIC-level uhci_hcd:usb2
/proc/interrupts: 185: 102290 IO-APIC-level eth0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 1386479
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1166164 kB
/proc/meminfo: MemFree: 673024 kB
/proc/meminfo: Buffers: 36172 kB
/proc/meminfo: Cached: 358800 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 279064 kB
/proc/meminfo: Inactive: 175196 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1166164 kB
/proc/meminfo: LowFree: 673024 kB
/proc/meminfo: SwapTotal: 1951856 kB
/proc/meminfo: SwapFree: 1951856 kB
/proc/meminfo: Dirty: 1632 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 66068 kB
/proc/meminfo: Slab: 27552 kB
/proc/meminfo: CommitLimit: 2534936 kB
/proc/meminfo: Committed_AS: 112240 kB
/proc/meminfo: PageTables: 296 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 16892 kB
/proc/meminfo: VmallocChunk: 104788 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=161d Version=0110
/proc/bus/input/devices: N: Name="HP HP Wireless Optical 5-Button Mouse with USB Cradle"
/proc/bus/input/devices: P: Phys=usb-0000:00:1f.4-2.2.4/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=event1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=1f0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 64 structures occupying 2207 bytes.
dmidecode: Table at 0x000F0FD0.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Intel Corp.
dmidecode: Version: MV85010A.86A.0038.P15.0207241616
dmidecode: Release Date: 07/24/2002
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
dmidecode: Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer:
dmidecode: Product Name:
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: UUID: C163458D-4C93-11D6-ACE9-001083B8DC13
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Intel Corporation
dmidecode: Product Name: D850MV
dmidecode: Version: AAA56423-301
dmidecode: Serial Number: IUMV21510565
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer:
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: J4K2
dmidecode: Type: Central Processor
dmidecode: Family: Pentium 4
dmidecode: Manufacturer: Intel Corporation
dmidecode: ID: 24 0F 00 00 FF FB EB 3F
dmidecode: Signature: Type 0, Family 15, Model 2, Stepping 4
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: Version: Pentium(R) 4
dmidecode: Voltage: 3.0 V
dmidecode: External Clock: 100 MHz
dmidecode: Max Speed: 1800 MHz
dmidecode: Current Speed: 1800 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: None
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 8 KB
dmidecode: Maximum Size: 8 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Pipeline Burst Synchronous
dmidecode: Speed: 40 ns
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: None
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Parity
dmidecode: System Type: Unified
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0007, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 32-bit ECC
dmidecode: Error Correcting Capabilities:
dmidecode: Single-bit Error Correcting
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 512 MB
dmidecode: Maximum Total Memory Size: 2048 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: 50 ns
dmidecode: Supported Memory Types:
dmidecode: Other
dmidecode: ECC
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: 0x000A
dmidecode: 0x000B
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: Single-bit Error Correcting
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: J7J1
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: Unknown
dmidecode: Type: Other ECC
dmidecode: Installed Size: 256 MB (Single-bank Connection)
dmidecode: Enabled Size: 256 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: J7J2
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: Unknown
dmidecode: Type: Other ECC
dmidecode: Installed Size: 256 MB (Single-bank Connection)
dmidecode: Enabled Size: 256 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: J8J1
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: Unknown
dmidecode: Type: Other ECC
dmidecode: Installed Size: 512 MB (Single-bank Connection)
dmidecode: Enabled Size: 512 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: J8J2
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: Unknown
dmidecode: Type: Other ECC
dmidecode: Installed Size: 512 MB (Single-bank Connection)
dmidecode: Enabled Size: 512 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J4E1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J4D1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x000E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J4C1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000F, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J4C1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0010, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J4C1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0011, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J4C1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 6
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0012, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J5E1
dmidecode: Type: 32-bit AGP 4x
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 7
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0013, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description: Intel ICH2 Audio Device
dmidecode:
dmidecode: Handle 0x0014, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Intel 82559 Ethernet Device
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1L1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1L1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1K1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: COM A
dmidecode: External Connector Type: DB-9 female
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1J2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LPT1
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1M1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Keyboard
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1M1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS2Mouse
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JA1H1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LAN
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1F3 - VIDEO INTERFACE PORT
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: None
dmidecode: External Connector Type: None
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1G1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Mic In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1G1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1G1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J10C1
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: USB Front Panel
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J10G1 - Floppy
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9G2 - PRI IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9G1 - SEC IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0024, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2D1 - CDIN
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0025, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2C2 - Telephony IN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0026, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2C1 - AUX IN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0027, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J8C1 - Wake On Ring
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0028, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J7C1 - Wake On LAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0029, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J7A2 - SCSI LED
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9D2 - Control Panel
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J7M2 - Power Supply Fan
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6M1 - CPU Fan
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J8C2 - Configuration Jumper
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002E, DMI type 12, 5 bytes
dmidecode: System Configuration Options
dmidecode: Option 1: J8C2 Jumper Pins 1-2 Normal Mode
dmidecode: Option 2: J8C2 Jumper Pins 2-3 Configuration Mode
dmidecode: Option 3: J8C2 No Jumper Recovery Mode
dmidecode:
dmidecode: Handle 0x002F, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 13
dmidecode: enUS
dmidecode: frFR
dmidecode: deDE
dmidecode: itIT
dmidecode: esES
dmidecode: enGB
dmidecode: enAU
dmidecode: frCA
dmidecode: nlNL
dmidecode: svSE
dmidecode: daDK
dmidecode: noNO
dmidecode: fiFI
dmidecode: Currently Installed Language: enUS
dmidecode:
dmidecode: Handle 0x0030, DMI type 15, 33 bytes
dmidecode: System Event Log
dmidecode: Area Length: 4096 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x0010
dmidecode: Access Method: Memory-mapped physical 32-bit address
dmidecode: Access Address: 0xFFFDEF00
dmidecode: Status: Valid, Not Full
dmidecode: Change Token: 0x00000000
dmidecode: Header Format: Type 1
dmidecode: Supported Log Type Descriptors: 5
dmidecode: Descriptor 1: POST error
dmidecode: Data Format 1: POST results bitmap
dmidecode: Descriptor 2: Parity memory error
dmidecode: Data Format 2: Multiple-event
dmidecode: Descriptor 3: I/O channel block
dmidecode: Data Format 3: Multiple-event
dmidecode: Descriptor 4: Single-bit ECC memory error
dmidecode: Data Format 4: Multiple-event
dmidecode: Descriptor 5: Multi-bit ECC memory error
dmidecode: Data Format 5: Multiple-event
dmidecode:
dmidecode: Handle 0x0031, DMI type 31, 28 bytes
dmidecode: Boot Integrity Services Entry Point
dmidecode:
dmidecode: Handle 0x0032, DMI type 18, 23 bytes
dmidecode: 32-bit Memory Error Information
dmidecode: Type: Unknown
dmidecode: Granularity: Unknown
dmidecode: Operation: Unknown
dmidecode: Vendor Syndrome: Unknown
dmidecode: Memory Array Address: Unknown
dmidecode: Device Address: Unknown
dmidecode: Resolution: Unknown
dmidecode:
dmidecode: Handle 0x0033, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 2 GB
dmidecode: Error Information Handle: 0x0032
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0034, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0005FFFFFFF
dmidecode: Range Size: 1536 MB
dmidecode: Physical Array Handle: 0x0033
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0035, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0033
dmidecode: Error Information Handle: 0x0032
dmidecode: Total Width: 16 bits
dmidecode: Data Width: 16 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: RIMM
dmidecode: Set: 3
dmidecode: Locator: J7J1
dmidecode: Bank Locator: RIMM1
dmidecode: Type: Other
dmidecode: Type Detail: RAMBus
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x0036, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Device Handle: 0x0035
dmidecode: Memory Array Mapped Address Handle: 0x0034
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0037, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0033
dmidecode: Error Information Handle: 0x0032
dmidecode: Total Width: 16 bits
dmidecode: Data Width: 16 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: RIMM
dmidecode: Set: 3
dmidecode: Locator: J7J2
dmidecode: Bank Locator: RIMM2
dmidecode: Type: Other
dmidecode: Type Detail: RAMBus
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x0038, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00010000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Device Handle: 0x0037
dmidecode: Memory Array Mapped Address Handle: 0x0034
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0039, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0033
dmidecode: Error Information Handle: 0x0032
dmidecode: Total Width: 16 bits
dmidecode: Data Width: 16 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: RIMM
dmidecode: Set: 3
dmidecode: Locator: J8J1
dmidecode: Bank Locator: RIMM3
dmidecode: Type: Other
dmidecode: Type Detail: RAMBus
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x003A, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0039
dmidecode: Memory Array Mapped Address Handle: 0x0034
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x003B, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0033
dmidecode: Error Information Handle: 0x0032
dmidecode: Total Width: 16 bits
dmidecode: Data Width: 16 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: RIMM
dmidecode: Set: 3
dmidecode: Locator: J8J2
dmidecode: Bank Locator: RIMM4
dmidecode: Type: Other
dmidecode: Type Detail: RAMBus
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x003C, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00040000000
dmidecode: Ending Address: 0x0005FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x003B
dmidecode: Memory Array Mapped Address Handle: 0x0034
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x003D, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x003E, DMI type 130, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 82 0C 3E 00 01 01 02 01 00 01 08 01
dmidecode: Strings:
dmidecode: Alert on LAN
dmidecode: Intel_ICH2
dmidecode:
dmidecode: Handle 0x003F, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: ttf-thai-tlwg-udeb
Status: install ok unpacked
Version: 1:0.4.4-5
Description: Thai fonts in TrueType format for D-I use
Package: input-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: input-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Input devices support
Package: acpi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-486-di
Description: ACPI support modules
Package: scsi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: SCSI drivers
Package: preseed-common
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: mouse-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: mouse-modules
Depends: kernel-image-2.6.17-2-486-di, input-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Mouse support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.27
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: cdrom-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-modules
Depends: ide-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Esoteric CDROM drivers
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-6
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok installed
Version: 1.08
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.14
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: ttf-khmeros-udeb
Status: install ok unpacked
Version: 3.10-3
Provides: ttf-installer
Description: Debian-Installer font for the Khmer language of Cambodia
Package: di-utils-shell
Status: install ok unpacked
Version: 1.36
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: usb-serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB serial drivers
Package: ttf-dejavu-udeb
Status: install ok unpacked
Version: 2.10-1
Description: Vera font family derivate with additional characters
Package: di-utils
Status: install ok installed
Version: 1.36
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: usb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: USB support
Package: pcmcia-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: PCMCIA storage drivers
Package: scsi-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Core SCSI subsystem
Package: ttf-cjk-compact-udeb
Status: install ok unpacked
Version: 1.6
Description: Shrinked CJK TrueType fonts for GUI d-i.
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.107
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ttf-freefont-udeb
Status: install ok unpacked
Version: 20060501cvs-9
Provides: ttf-installer
Description: Freefont Sans fonts for the graphical installer
Package: ttf-dzongkha-udeb
Status: install ok unpacked
Version: 0.2-3
Provides: ttf-installer
Description: TrueType fonts for Dzongkha language
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.41
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: libgtk-directfb-2.0-0-udeb
Status: install ok unpacked
Version: 2.8.20-3
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.5), libpng12-0-udeb (>= 1.2.8rel)
Description: The GTK+ graphical user interface library - minimal runtime
Package: firmware-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Firmware request modules
Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: libpng12-0-udeb
Status: install ok unpacked
Version: 1.2.8rel-7
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: PNG library - minimal runtime library
Package: libnss-files-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-6
Description: GNU C Library: NSS helper for files - udeb
Package: fb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Frame buffer support
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: scsi-common-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di
Description: Very common SCSI drivers
Package: libcairo-directfb2-udeb
Status: install ok unpacked
Version: 1.2.4-3.1
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: The Cairo 2D vector graphics library DirectFB build
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: gtk2-engines-udeb
Status: install ok unpacked
Version: 1:2.8.1-3
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.5)
Description: theme engines for GTK+ 2.x in the Debian installer
Package: pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: Common PCMCIA drivers
Package: auto-install
Status: install ok installed
Version: 0.01
Depends: netcfg, preseed-common (>= 1.18)
Description: support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: serial-modules
Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Serial drivers
Package: ide-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: IDE support
Package: rescue-check
Status: install ok unpacked
Version: 1.6
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: rootskel-gtk
Status: install ok unpacked
Version: 0.14
Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb
Description: Additions for graphical installs to skeleton root filesystem (debian-installer)
Package: cdebconf-udeb
Status: install ok installed
Version: 0.107
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.01
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: floppy-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Floppy driver
Package: libpango1.0-udeb
Status: install ok unpacked
Version: 1.14.7-1
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2), libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1)
Description: Layout and rendering of internationalized text
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: parport-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: parport-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Parallel port support
Package: load-cdrom
Status: install ok installed
Version: 1.11
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.107
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: firewire-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Core FireWire drivers
Package: libfreetype6-udeb
Status: install ok unpacked
Version: 2.2.1-5
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: FreeType 2 font engine for the debian-installer
Package: iso-3166-udeb
Status: install ok installed
Version: 0.56-1
Description: provides iso_3166.tab file
Package: ttf-farsiweb-udeb
Status: install ok unpacked
Version: 0.4-4
Provides: ttf-installer
Description: Farsiweb TrueType fonts for the graphical installer
Package: floppy-retriever
Status: install ok unpacked
Version: 1.10
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.42
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: libexpat1-udeb
Status: install ok unpacked
Version: 1.95.8-3.3
Provides: libexpat1
Depends: libc6 (>= 2.3.6-6)
Description: XML parsing C library - runtime library
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.18
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.42
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.44)
Description: Hardware architecture detector
Package: cdrom-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di
Description: CDROM support
Package: ttf-bpg-georgian-fonts-udeb
Status: install ok unpacked
Version: 0.3
Provides: ttf-installer
Description: BPG Georgian fonts for the graphical installer
Package: save-logs
Status: install ok installed
Version: 2.20
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.36
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-5
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: ttf-tamil-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.1
Provides: ttf-installer
Description: Free TrueType fonts for the Tamil language
Package: usb-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB storage support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.36
Description: Terminfo entries needed by newt/slang in debian installer
Package: libdirectfb-0.9-25-udeb
Status: install ok unpacked
Version: 0.9.25.1-4
Provides: libdirectfb-0.9-25
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
Description: direct frame buffer graphics - shared libraries
Package: hw-detect
Status: install ok installed
Version: 1.42
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.30
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: fontconfig-udeb
Status: install ok unpacked
Version: 2.4.1-2
Depends: libc6 (>= 2.3.6-6), libexpat1-udeb (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1)
Description: generic font configuration library - minimal runtime
Package: cdebconf-gtk-udeb
Status: install ok unpacked
Version: 0.107
Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.5), rootskel-gtk (>= 0.05)
Description: Gtk+ frontend for Debian Configuration Management System
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.18
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.7
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.107
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: fat-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fat-modules
Depends: kernel-image-2.6.17-2-486-di
Description: FAT filesystem support
Package: netcfg
Status: install ok installed
Version: 1.30
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.18
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libglib2.0-udeb
Status: install ok unpacked
Version: 2.12.4-1
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines
Package: sata-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: sata-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Description: SATA drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.107
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: ide-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di
Description: IDE drivers
Package: libatk1.0-udeb
Status: install ok unpacked
Version: 1.12.3-1
Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0)
Description: The ATK accessibility toolkit
Package: cdrom-detect
Status: install ok installed
Version: 1.17
Depends: hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: kernel-image-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: debian-installer
Status: install ok installed
Version: cdrom-gtk-20061020
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.15
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.15
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.67
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.44), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.07
Depends: cdebconf-udeb, configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.07
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.11
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.36
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.42
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ext3-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-11
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 332
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-6
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.4-1
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 372
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 624
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 59
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 868
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 96
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 796
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 15
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 42
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 284
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 228
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-8
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.09
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 296
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.11
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
pn pciutils <none> (no description available)
ii reportbug 3.30 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---