--- Begin Message ---
Package: installation-reports
Boot method: amd64 businesscard cd
Image version: etch beta3
Date: Tue Aug 22 11:27:48 CEST 2006
Machine: SUN X4100
Processor: 2 * AMD Opteron(tm) Processor 248
Memory: 2GB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sdi1 ext3 6728280 427728 5958772 7% /
tmpfs tmpfs 1030936 0 1030936 0% /dev/shm
/dev/sdi6 ext3 26683932 131276 25197176 1% /home
tmpfs tmpfs 10240 112 10128 2% /dev
Output of lspci and lspci -n:
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13)
00:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13)
00:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:01.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 03)
01:01.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 03)
01:02.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 03)
01:02.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 03)
02:03.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 02)
03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
03:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
04:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13)
04:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
04:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13)
04:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:01.0 0604: 1022:7450 (rev 13)
00:01.1 0800: 1022:7451 (rev 01)
00:02.0 0604: 1022:7450 (rev 13)
00:02.1 0800: 1022:7451 (rev 01)
00:06.0 0604: 1022:7460 (rev 07)
00:07.0 0601: 1022:7468 (rev 05)
00:07.1 0101: 1022:7469 (rev 03)
00:07.2 0c05: 1022:746a (rev 02)
00:07.3 0680: 1022:746b (rev 05)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
00:19.0 0600: 1022:1100
00:19.1 0600: 1022:1101
00:19.2 0600: 1022:1102
00:19.3 0600: 1022:1103
01:01.0 0200: 8086:1010 (rev 03)
01:01.1 0200: 8086:1010 (rev 03)
01:02.0 0200: 8086:1010 (rev 03)
01:02.1 0200: 8086:1010 (rev 03)
02:03.0 0100: 1000:0050 (rev 02)
03:00.0 0c03: 1022:7464 (rev 0b)
03:00.1 0c03: 1022:7464 (rev 0b)
03:03.0 0300: 1002:4752 (rev 27)
04:01.0 0604: 1022:7450 (rev 13)
04:01.1 0800: 1022:7451 (rev 01)
04:02.0 0604: 1022:7450 (rev 13)
04:02.1 0800: 1022:7451 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Everything now wents fine. Although the Hardware RAID controller (LSI SAS1064) is fully supported.
Sadly the HW RAID is recognized as sdi (see attached dmesg). If possible it would be great to fix this.
Now I'm gonna test i386 image
Bootdata ok (command line is root=/dev/sdi1 ro )
Linux version 2.6.16-2-amd64-k8 (Debian 2.6.16-17) (waldi@debian.org) (gcc version 4.0.4 20060630 (prerelease) (Debian 4.0.3-4)) #1 Sun Jul 16 01:27:59 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 SUN ) @ 0x00000000000f6e60
ACPI: XSDT (v001 SUN X4100 0x00000022 MSFT 0x00000097) @ 0x000000007fff0100
ACPI: FADT (v003 SUN X4200 0x00000022 MSFT 0x00000097) @ 0x000000007fff0290
ACPI: MADT (v001 SUN X4100 0x00000022 MSFT 0x00000097) @ 0x000000007fff0390
ACPI: SPCR (v001 SUN X4100 0x00000022 MSFT 0x00000097) @ 0x000000007fff0430
ACPI: OEMB (v001 SUN X4100 0x00000022 MSFT 0x00000097) @ 0x000000007ffff040
ACPI: SRAT (v001 SUN X4100 0x00000022 MSFT 0x00000097) @ 0x000000007fff3730
ACPI: DSDT (v001 SUN X4100 0x00000022 INTL 0x02002026) @ 0x0000000000000000
On node 0 totalpages: 516242
DMA zone: 3177 pages, LIFO batch:0
DMA32 zone: 513065 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x5008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfe6ff000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfe6ff000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfe6fe000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfe6fe000, GSI 28-31
ACPI: IOAPIC (id[0x05] address[0xfeaff000] gsi_base[32])
IOAPIC[3]: apic_id 5, version 17, address 0xfeaff000, GSI 32-35
ACPI: IOAPIC (id[0x06] address[0xfeafe000] gsi_base[36])
IOAPIC[4]: apic_id 6, version 17, address 0xfeafe000, GSI 36-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
Checking aperture...
CPU 0: aperture @ 410000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/sdi1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2193.814 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2056584k/2097088k available (1702k kernel code, 39752k reserved, 779k data, 152k init)
Calibrating delay using timer specific routine.. 4396.59 BogoMIPS (lpj=8793192)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Opteron(tm) Processor 248 stepping 01
Using local APIC timer interrupts.
result 12464855
Detected 12.464 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
Freeing initrd memory: 4772k freed
DMI 2.3 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:03:03.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
ACPI: PCI Root Bridge [PCIB] (0000:04)
PCI: Probing PCI hardware (bus 04)
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.GOLC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.GOLD._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0A03
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:07' and the driver 'system'
pnp: 00:07: ioport range 0x680-0x6ff has been reserved
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: 00:0a: ioport range 0xca0-0xcbf has been reserved
pnp: 00:0a: ioport range 0x4700-0x4700 has been reserved
pnp: match found with the PnP device '00:0b' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: fbf00000-fbffffff
PREFETCH window: fe700000-fe7fffff
PCI: Bridge: 0000:00:02.0
IO window: a000-afff
MEM window: fc000000-fc4fffff
PREFETCH window: fe800000-fe8fffff
PCI: Bridge: 0000:00:06.0
IO window: b000-bfff
MEM window: fc500000-fe5fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:04:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1156238696.564:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.101 (c) Dave Jones
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:03' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:06' and the driver 'serial'
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
PCI1 USB0 ETHR USB1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 152k freed
ACPI: Processor [CPU1] (supports 8 throttling states)
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 169
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:03:00.0: irq 169, io mem 0xfe3fe000
SCSI subsystem initialized
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
Copyright (c) 1999-2005 Intel Corporation.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Fusion MPT SAS Host driver 3.03.07
ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 169
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:03:00.1: irq 169, io mem 0xfe3fd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 26 (level, low) -> IRQ 177
e1000: 0000:01:01.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:14:4f:40:46:58
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 27 (level, low) -> IRQ 185
e1000: 0000:01:01.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:14:4f:40:46:59
usb 1-3: new full speed USB device using ohci_hcd and address 2
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 24 (level, low) -> IRQ 193
e1000: 0000:01:02.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:14:4f:40:46:5a
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:01:02.1[B] -> GSI 25 (level, low) -> IRQ 201
e1000: 0000:01:02.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:14:4f:40:46:5b
usb 1-3: configuration #1 chosen from 1 choice
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
hda: MATSHITACD-RW CW-8124, ATAPI CD/DVD-ROM drive
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input0
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:03:00.0-3
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input1
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:03:00.0-3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 209
mptbase: Initiating ioc0 bringup
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ioc0: SAS1064: Capabilities={Initiator}
Vendor: AMI Model: Virtual CDROM Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 00
usb-storage: device scan complete
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
scsi2 : ioc0: LSISAS1064, FwRev=01040000h, Ports=1, MaxQ=511, IRQ=209
Vendor: LSILOGIC Model: Logical Volume Rev: 3000
Type: Direct-Access ANSI SCSI revision: 02
sd 1:0:0:0: Attached scsi removable disk sda
sd 1:0:0:1: Attached scsi removable disk sdb
sd 1:0:0:2: Attached scsi removable disk sdc
sd 1:0:0:3: Attached scsi removable disk sdd
sd 1:0:0:4: Attached scsi removable disk sde
sd 1:0:0:5: Attached scsi removable disk sdf
sd 1:0:0:6: Attached scsi removable disk sdg
sd 1:0:0:7: Attached scsi removable disk sdh
SCSI device sdi: 70311936 512-byte hdwr sectors (36000 MB)
sdi: Write Protect is off
sdi: Mode Sense: 03 00 00 08
SCSI device sdi: drive cache: write through
SCSI device sdi: 70311936 512-byte hdwr sectors (36000 MB)
sdi: Write Protect is off
sdi: Mode Sense: 03 00 00 08
SCSI device sdi: drive cache: write through
sdi: sdi1 sdi2 < sdi5 sdi6 >
sd 2:4:2:0: Attached scsi disk sdi
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input2
hw_random: AMD768 system management I/O registers at 0x5000.
hw_random hardware driver 1.0.0 loaded
sr0: scsi-1 drive
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:1: Attached scsi generic sg2 type 0
sd 1:0:0:2: Attached scsi generic sg3 type 0
sd 1:0:0:3: Attached scsi generic sg4 type 0
sd 1:0:0:4: Attached scsi generic sg5 type 0
sd 1:0:0:5: Attached scsi generic sg6 type 0
sd 1:0:0:6: Attached scsi generic sg7 type 0
sd 1:0:0:7: Attached scsi generic sg8 type 0
sd 2:4:2:0: Attached scsi generic sg9 type 0
Adding 1204832k swap on /dev/sdi5. Priority:-1 extents:1 across:1204832k
EXT3 FS on sdi1, internal journal
loop: loaded (max 8 devices)
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdi6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Half Duplex
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
--- End Message ---