Package: installation-reports
Boot method: CD
Image version: jigdo image of the 06/08/11
Date: 06/08/27
Machine: HP Pavilion ZV5310EA
Processor: Athlon XP-M 2800 +
Memory: 768 MB
Partitions:
Sys. de fich. Type 1K-blocs Occupé Disponible Capacité Monté sur
/dev/hda7 ext3 2640604 1057696 1448768 43% /
tmpfs tmpfs 388120 0 388120 0% /dev/shm
tmpfs tmpfs 10240 128 10112 2% /dev
lspci
00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev
a5)
00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
00:06.1 Modem: nVidia Corporation nForce3 Audio (rev a2)
00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3)
02:01.0
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)
02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
lspci -n
00:00.0 0600: 10de:00d1 (rev a4)
00:01.0 0601: 10de:00d0 (rev a6)
00:01.1 0c05: 10de:00d4 (rev a4)
00:02.0 0c03: 10de:00d7 (rev a5)
00:02.1 0c03: 10de:00d7 (rev a5)
00:02.2 0c03: 10de:00d8 (rev a2)
00:06.0 0401: 10de:00da (rev a2)
00:06.1 0703: 10de:00d9 (rev a2)
00:08.0 0101: 10de:00d5 (rev a5)
00:0a.0 0604: 10de:00dd (rev a2)
00:0b.0 0604: 10de:00d2 (rev a4)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 10de:0176
(rev a3)
02:01.0 0200: 10ec:8139 (rev 10)
02:02.0 0280: 14e4:4301 (rev 02)
02:04.0 0607: 104c:ac54 (rev 01)
02:04.1 0607: 104c:ac54 (rev 01)
02:04.2 0880: 104c:8201 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Pb : I have only one problem : I haven'y got any sound.
Comments :
I installed it in french with the 'installgui'. The text writen in the progression bar is in french but the text writen above and underneath is in english.
Suggestions :
This installer could be
quite good if it was possible to choose the graphical interface, like KDE, Xfce, Gnome...
That's all. This is a very important improvement since I tried Sarge last summer. Keep working in this way.