[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#264510: marked as done (Installation Report)

Your message dated Mon, 28 Aug 2006 15:21:52 +0200
with message-id <20060828132152.GA5830@dp.vpn.nusquama.org>
and subject line installation report
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

Debian-installer-version:  aug 8 2004 from us.debian.somwhere.org
most files came from linux.csua.berkeley.edu
uname -a: OFS1 betty V4.0 1091 alpha alpha unknown Tru64 (other os)
Date:  aug 8 2004
Method:  jigdo cd 1, enter srm console, boot <disk#>

Machine:  compaq xp1000 alpha 21264-3 500MHz
Processor: alpha 21264-3
Memory: 1 g
Root Device: IDE  /dev/hdba
Root Size/partition table: 8 megj
Output of lspci: what?

Base System Installation Checklist:

Initial boot worked:    [o]
Configure network HW:   [o]
Config network:         [o]
Detect CD:              [o]
Load installer modules: [o]
Detect hard drives:     [o]
Partition hard drives:  [o]
Create file systems:    [o]
Mount partitions:       [o]
Install base system:    [o]
Install boot loader:    [o]
Reboot:                 [E]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

upon reboot, starts rebooting, goes pretty far, then:
insmod: /lib/modules/2.4.26-1-generic/kernel/driver/usb/host/usb-ohci.o:
init_module: No such device
insmod usb-ohci failed
usb-ohci can't be loaded.

(machine hangs.
fyi. nothing plugged into usb.)


-- 
Carl Hansen
carl@pictopia.com

--- End Message ---
--- Begin Message --- 
Hello,

I'm processing old installation reports and noticed this one
filed in 2004 about the system hanging during boot.

On Wed, Oct 13, 2004 at 09:28:51PM -0400, Joey Hess wrote:
> > upon reboot, starts rebooting, goes pretty far, then:
> > insmod: /lib/modules/2.4.26-1-generic/kernel/driver/usb/host/usb-ohci.o:
> > init_module: No such device
> > insmod usb-ohci failed
> > usb-ohci can't be loaded.
> > 
> > (machine hangs.
> > fyi. nothing plugged into usb.)

This most likely indicates a problem with either the kernel or
hardware detection. Both have changed significantly since pre-
Sarge, so I would expect the system to boot correctly now. Please
reopen this bug report (or just reply so I can do it) with the
output of "lspci; lspci -n" in case the problem persists. We can
then reassign the report to the kernel or hardware detection
component responsible. Thanks.

cheers,
Max

--- End Message ---
Reply to: