[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#310754: marked as done (Should check if labels are already in use)

Your message dated Thu, 13 Jul 2006 17:17:23 -0700
with message-id <E1G1BMx-0003ys-47@spohr.debian.org>
and subject line Bug#310754: fixed in partman-ext2r0 1.8
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20050518/debian-testing-i386-netinst.iso
uname -a: Linux gs4445 2.6.11.10 #2 Fri May 20 14:48:23 EDT 2005 i686 GNU/Linux
Date: 20050520 10:00 EST
Method: boot from netinst CD, installed from http://http.us.debian.org mirrors

Machine: Dell desktop
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 1GB
Root Device: IDE /dev/hda2 (ext3)
Root Size/partition table: 
	/dev/hda2 on / type ext3 (rw,errors=remount-ro)      (12GB)
	proc on /proc type proc (rw)
	sysfs on /sys type sysfs (rw)
	devpts on /dev/pts type devpts (rw,gid=5,mode=620)
	tmpfs on /dev/shm type tmpfs (rw)
	usbfs on /proc/bus/usb type usbfs (rw)
	/dev/hda7 on /opt type ext3 (rw)                     (15GB)
	/dev/hda3 on /var type ext3 (rw)                     (5GB)
	/dev/hda5 on /mnt type ext3 (rw)                     (500MB)
	none on /dev type tmpfs (rw,size=10M,mode=0755)
	arla on /afs type nnpfs (rw)
Output of lspci:
	0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub
	Interface (rev 02)
	0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller
	(rev 02)
	0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
	#1 (rev 02)
	0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
	#2 (rev 02)
	0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
	#3 (rev 02)
	0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
	#4 (rev 02)
	0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
	Controller (rev 02)
	0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
	0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge
	(rev 02)
	0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA
	100 Storage Controller (rev 02)
	0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
	Storage Controller (rev 02)
	0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller
	(rev 02)
	0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER
	(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
	0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4
	MX 440 AGP 8x] (rev c1)
	0000:02:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet
	Controller (rev 02)
Output of lspci -n:
	0000:00:00.0 0600: 8086:2570 (rev 02)
	0000:00:01.0 0604: 8086:2571 (rev 02)
	0000:00:1d.0 0c03: 8086:24d2 (rev 02)
	0000:00:1d.1 0c03: 8086:24d4 (rev 02)
	0000:00:1d.2 0c03: 8086:24d7 (rev 02)
	0000:00:1d.3 0c03: 8086:24de (rev 02)
	0000:00:1d.7 0c03: 8086:24dd (rev 02)
	0000:00:1e.0 0604: 8086:244e (rev c2)
	0000:00:1f.0 0601: 8086:24d0 (rev 02)
	0000:00:1f.1 0101: 8086:24db (rev 02)
	0000:00:1f.2 0101: 8086:24d1 (rev 02)
	0000:00:1f.3 0c05: 8086:24d3 (rev 02)
	0000:00:1f.5 0401: 8086:24d5 (rev 02)
	0000:01:00.0 0300: 10de:0181 (rev c1)
	0000:02:0c.0 0200: 8086:100e (rev 02)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try
it

Initial boot worked:    [O]
Configure network HW:   [E]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [E]
Reboot:                 [O]

Comments/Problems:
	I ran the installer in expert26 mode.

	Errors were reported when loading modules (in particular when loading the
ethernet card driver), but these did not affect the install.  Most errors
were on modules for hardware I don't have, but one was for the ethernet card.
The module seemed to load and function fine.

	The biggest problem I had was with the labelling of partitions.  This
machine is provided by the university where I am a grad student, and it comes
preloaded with RedHat and Windows.  I installed Debian on the Windows
partition, and I need to keep RedHat.  I didn't alter the grub configuration
during the debian install; I planned to boot back into RedHat and alter the
menu.lst on its root partition (/dev/hda5).  However, the RedHat grub entries
relied on mounting the root partition by the label (LABEL=/).  The
debian-installer assigned this same label to its root partition (/dev/hda2).
Even though I was in expert mode, I don't recall being offered a choice to
veto this label.  As a result, the already-present RedHat grub entries booted
old RedHat kernels with the new Debian root filesystem.  Results were
interesting but easily correctable.

--- End Message ---
--- Begin Message --- 
Source: partman-ext2r0
Source-Version: 1.8

We believe that the bug you reported is fixed in the latest version of
partman-ext2r0, which is due to be installed in the Debian FTP archive:

partman-ext2r0_1.8.dsc
  to pool/main/p/partman-ext2r0/partman-ext2r0_1.8.dsc
partman-ext2r0_1.8.tar.gz
  to pool/main/p/partman-ext2r0/partman-ext2r0_1.8.tar.gz
partman-ext2r0_1.8_arm.udeb
  to pool/main/p/partman-ext2r0/partman-ext2r0_1.8_arm.udeb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 310754@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Martin Michlmayr <tbm@cyrius.com> (supplier of updated partman-ext2r0 package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Fri, 14 Jul 2006 02:10:53 +0200
Source: partman-ext2r0
Binary: partman-ext2r0
Architecture: source arm
Version: 1.8
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Martin Michlmayr <tbm@cyrius.com>
Description: 
 partman-ext2r0 - Add to partman support for old ext2 (revision 0) (udeb)
Closes: 310754
Changes: 
 partman-ext2r0 (1.8) unstable; urgency=low
 .
   [ Colin Watson ]
   * Don't use the mountpoint as a default label (closes: #310754).
 .
   [ Updated translations ]
   * Arabic (ar.po) by Ossama M. Khayat
   * Bulgarian (bg.po) by Ognyan Kulev
   * Bengali (bn.po) by Baishampayan Ghose
   * Bosnian (bs.po) by Safir Secerovic
   * Catalan (ca.po) by Jordi Mallach
   * Czech (cs.po) by Miroslav Kure
   * Welsh (cy.po) by Dafydd Harries
   * Danish (da.po) by Claus Hindsgaul
   * German (de.po) by Jens Seidel
   * Dzongkha (dz.po)
   * Greek (el.po) by quad-nrg.net
   * Esperanto (eo.po) by Serge Leblanc
   * Spanish (es.po) by Javier Fernández-Sanguino Peña
   * Estonian (et.po) by Siim Põder
   * Basque (eu.po) by Piarres Beobide
   * Finnish (fi.po) by Tapio Lehtonen
   * French (fr.po) by Christian Perrier
   * Irish (ga.po) by Kevin Patrick Scannell
   * Galician (gl.po) by Jacobo Tarrio
   * Hindi (hi.po) by Nishant Sharma
   * Hungarian (hu.po) by SZERVÃ?C Attila
   * Indonesian (id.po) by Parlin Imanuel Toh
   * Italian (it.po) by Giuseppe Sacco
   * Japanese (ja.po) by Kenshi Muto
   * Georgian (ka.po) by Aiet Kolkhi
   * Khmer (km.po) by Khoem Sokhem
   * Korean (ko.po) by Sunjae park
   * Kurdish (ku.po) by Erdal Ronahi
   * Lithuanian (lt.po) by KÄ?stutis BiliÅ«nas
   * Latvian (lv.po) by Aigars Mahinovs
   * Malagasy (mg.po) by Jaonary Rabarisoa
   * Macedonian (mk.po) by Georgi Stanojevski
   * Norwegian Bokmal (nb.po) by Bjørn Steensrud
   * Nepali (ne.po) by Shiva Pokharel
   * Dutch (nl.po) by Bart Cornelis
   * Norwegian Nynorsk (nn.po) by HÃ¥vard Korsvoll
   * Punjabi (Gurmukhi) (pa.po) by Amanpreet Singh Alam
   * Polish (pl.po) by Bartosz Fenski
   * Portuguese (pt.po) by Miguel Figueiredo
   * Portuguese (Brazil) (pt_BR.po) by André Luís Lopes
   * Romanian (ro.po) by Eddy PetriÅ?or
   * Russian (ru.po) by Yuri Kozlov
   * Northern Sami (se.po) by Børre Gaup
   * Slovak (sk.po) by Peter Mann
   * Slovenian (sl.po) by Jure Ä?uhalev
   * Albanian (sq.po) by Elian Myftiu
   * Swedish (sv.po) by Daniel Nylander
   * Tamil (ta.po) by Damodharan Rajalingam
   * Thai (th.po) by Theppitak Karoonboonyanan
   * Tagalog (tl.po) by Eric Pareja
   * Turkish (tr.po) by Recai OktaÅ?
   * Ukrainian (uk.po) by Eugeniy Meshcheryakov
   * Vietnamese (vi.po) by Clytie Siddall
   * Wolof (wo.po) by Mouhamadou Mamoune Mbacke
   * Simplified Chinese (zh_CN.po) by Carlos Z.F. Liu
   * Traditional Chinese (zh_TW.po) by Tetralet
Files: 
 3ec2ffe263f56748a61ced9675dc3fdd 644 debian-installer standard partman-ext2r0_1.8.dsc
 6b8dc4ec8f558ed67e23e0514998e1b4 85062 debian-installer standard partman-ext2r0_1.8.tar.gz
 c81ad311fc0eafceceeba9f88b2a135c 86186 debian-installer standard partman-ext2r0_1.8_arm.udeb
Package-Type: udeb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)

iD8DBQFEtuF/Kb5dImj9VJ8RAqccAKChDNERmW8CkQGotxXOmCvJRY+MhwCfS2tU
Ca8r1k5CudIRct1eNMq+tDQ=
=Z/X8
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: