[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#220827: marked as done (Failed install)

Your message dated Thu, 15 Jun 2006 04:48:56 -0400
with message-id <20060615084856.GA4760@kitenet.net>
and subject line closing ancient report
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports
I downloaded an installer about a week ago from http://www.debian.org/devel/debian-installer/.
After I booted and answered a few questions, the installer hung with a message that it couldn't find any cdrom on my system. I'm running a P4 system with motherboard Asus P4S533, booting from an AOPEN CD-RW CRW2440, cd drive.
Here's the dmesg from my FreeBSD system (I got an extra disk drive and wanted to check out Debian...) 

CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.18-MHz 686-class CPU)
 Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> 
real memory  = 536854528 (511 MB)
avail memory = 510877696 (487 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0690c02 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P4S533  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1b20
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce2 MX/MX 400> mem 0xf0000000-0xf7ffffff,0xe7000000-0xe7ffffff irq 11 at device 0.0 on pci1 
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 5 at device 2.2 on pci0 
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ulpt0: Canon S600, rev 1.10/2.20, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 9 at device 2.3 on pci0 
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA100 controller> port 0xd800-0xd80f at device 2.5 on pci0 
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
sis0: <SiS 900 10/100BaseTX> port 0xb000-0xb0ff mem 0xe5800000-0xe5800fff irq 9 at device 3.0 on pci0 
sis0: Ethernet address: 00:e0:18:94:ce:14
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 10 at device 5.0 on pci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38172MB <MAXTOR 6L040L2> [77557/16/63] at ata0-master UDMA100
ad1: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-slave UDMA100
acd0: CD-RW <AOPEN CD-RW CRW2440> at ata1-master PIO4
acd1: DVD-ROM <JLMS DVD-ROM LTD-166S> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s1a
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled

--- End Message ---
--- Begin Message --- 
I'm closing this very old report, I belive it's too old to be useful or
relvant anymore.

-- 
see shy jo

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: