Bug#372624: Bug
Package: installation-reports
Boot method: DVD-ISO
Image version: 05 June 2006 -
http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-dvd/
Date: 10 June 2006
Machine: AMD
Processor: AMD XP3000+
Memory: 512MB DDR
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 reiserfs 243642348 238207812 5434536 98% /
/dev/sdb1 reiserfs 312559096 310423436 2135660 100% /ftp2
Output of lspci and lspci -n:
root@tech:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 08)
00:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3114
[SATALink/SATARaid] Serial ATA Controller (rev 02)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
440 AGP 8x] (rev a2)
root@tech:~# lspci -n
00:00.0 Class 0600: 1106:3189 (rev 80)
00:01.0 Class 0604: 1106:b198
00:09.0 Class 0200: 10ec:8139 (rev 10)
00:0a.0 Class 0401: 1102:0002 (rev 08)
00:0a.1 Class 0980: 1102:7002 (rev 08)
00:0b.0 Class 0104: 1095:3114 (rev 02)
00:0f.0 Class 0104: 1106:3149 (rev 80)
00:0f.1 Class 0101: 1106:0571 (rev 06)
00:10.0 Class 0c03: 1106:3038 (rev 81)
00:10.1 Class 0c03: 1106:3038 (rev 81)
00:10.2 Class 0c03: 1106:3038 (rev 81)
00:10.3 Class 0c03: 1106:3038 (rev 81)
00:10.4 Class 0c03: 1106:3104 (rev 86)
00:11.0 Class 0601: 1106:3227
00:11.5 Class 0401: 1106:3059 (rev 60)
00:12.0 Class 0200: 1106:3065 (rev 78)
01:00.0 Class 0300: 10de:0181 (rev a2)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: [E]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Right, well. This system only got two SATA drives. I can mount them from
the console fine, but Debian Installer does not list it. So I'm unable
to proceed the installation..
When I get to the "Partition method" step, It only gives me one option,
"Manually edit partition table",
so I proceed to that step..
On that step it displays this:
"Configure software raid"
"Configure the Logical Volume Manager"
"Guided partitioning"
"Help on partition"
(two blank entries)
"Undo changes to partitions"
"Finish partitioning and write changes to disk"
As I've understood, this step is supposed to list the harddrives I got,
but it does not.. And, as I've said before, the kernel itself supports
my SATA drives fine, since I can mount them sucsesfully manually by
using ALT+F2 to go to the console..
Reply to: