Bug#369555: Successfull Debian installation
Package: installation-reports
INSTALL REPORT
Debian-installer-version: May 29, 'etch' - minimal CD net-install.
uname -a: Linux bareketh 2.6.15-1-amd64-generic #2 Tue Mar 7 06:24:40 UTC 2006
x86_64 GNU/Linux
Date: May 29, 15:00 (GMT+3)
Method: Network install, no proxy. Using LAN behind a router connected to the
Internet. Sources list:
deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot amd64 Binary-1
(20060314)]/ etch main
deb http://mirror.espri.arizona.edu/debian-amd64/debian/ etch main
deb-src http://mirror.espri.arizona.edu/debian-amd64/debian/ etch main
Machine: Motherboard: ASUS P5GV-MX
Processor: Intel P4 x86_64t with 2M cache.
Memory: 512MB
Root Device:
/dev/sda1 on / type ext3 (rw,errors=remount-ro) (SATA2)
Root Size/partition table:
bareketh:~# cat /proc/partitions
major minor #blocks name
8 0 156290904 sda
8 1 154818373 sda1 // ext3
8 2 1 sda2
8 5 1469916 sda5 // swap
Output of lspci and lspci -n:
bareketh:~# lspci
0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to
I/O Controller (rev 0e)
0000:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL
Express Chipset Family Graphics Controller (rev 0e)
0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High
Definition Audio Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 1 (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 04)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 04)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 04)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 04)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 04)
0000:00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 04)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 04)
0000:01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
bareketh:~# lspci -n
0000:00:00.0 0600: 8086:2580 (rev 0e)
0000:00:02.0 0300: 8086:2582 (rev 0e)
0000:00:1b.0 0403: 8086:2668 (rev 04)
0000:00:1c.0 0604: 8086:2660 (rev 04)
0000:00:1d.0 0c03: 8086:2658 (rev 04)
0000:00:1d.1 0c03: 8086:2659 (rev 04)
0000:00:1d.2 0c03: 8086:265a (rev 04)
0000:00:1d.3 0c03: 8086:265b (rev 04)
0000:00:1d.7 0c03: 8086:265c (rev 04)
0000:00:1e.0 0604: 8086:244e (rev d4)
0000:00:1f.0 0601: 8086:2640 (rev 04)
0000:00:1f.1 0101: 8086:266f (rev 04)
0000:00:1f.2 0101: 8086:2651 (rev 04)
0000:00:1f.3 0c05: 8086:266a (rev 04)
0000:01:02.0 0200: 10ec:8139 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The system was installed as a sever - i.e. no X11 server.
All is OK!! I just wish the base installation will add "contrib" to the
sources list. My favorite editor is xemacs, which requires "contrib". Also,
many other tools need it. Still, great work!
The Israely deb mirror did not work properly (and I am from Israel). So I used
arizona.edu instead.
--
Shoham Levy
Reply to: