Bug#362633: installation-report: fails to detect hard drive
Hi,
sorry, I have not received your reply sent to radim@lr42.nri.cz, should
have been sent to vor@ujv.cz.
The needed modules should be mptbase and mptscsih, they are present,
in /lib/modules... but not loaded, loading them manually and restarting
the partman does not help.
lspci does not show the hardware. These lines are missing (if debian
installer lspci output is compared to redhat- current installation -
output):
----------------
40:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
40:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01)
40:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
40:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01)
61:06.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 07)
61:06.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 07)
80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
(rev a3)
80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller
(rev a3)
----------------
dtto for lspci -n
------------------
40:01.0 Class 0604: 1022:7450 (rev 12)
40:01.1 Class 0800: 1022:7451 (rev 01)
40:02.0 Class 0604: 1022:7450 (rev 12)
40:02.1 Class 0800: 1022:7451 (rev 01)
61:06.0 Class 0100: 1000:0030 (rev 07)
61:06.1 Class 0100: 1000:0030 (rev 07)
80:00.0 Class 0580: 10de:005e (rev a3)
80:01.0 Class 0580: 10de:00d3 (rev a3)
------------------
Thanks
Radim Vocka
On Friday 14 April 2006 18:38, Radim Vocka wrote:
>> Comments/Problems:
>> Workstation with LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT
>> Dual Ultra320 SCSI controler and two SCSI hard drives.
>> Installer does not issue the error message indicating that the hard
>> drive is not found (installer of unofficial Sarge Amd64 distribution
>> does), but no hard drive is detected, as neither the hard drive, nor
>> the partition table is offered for the "Partition hard drive" step.
> Do you know which kernel modules are needed for that hardware?
> Are these modules present when you switch to VT2 and look in
> /lib/modules/.../kernel/drivers/message/fusion?
> Are these modules loaded (use 'lsmod | grep mpt')?
> If not can you load them manually and are the disks then shown when you
> restart partman?
> What is the output of 'lspci' and 'lspci -n' for your system (available
> during installation)?
> Cheers,
> FJP
Reply to: