[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]


Package: installation-reports


Debian-installer-version: 03 May 2006
uname -a: Linux helium.locallan 2.4.32 #1 Wed May 10 14:43:13 NZST
2006 i686 GNU/Linux <- source downloaded from kernel.org and custom
compiled the "Debian" way
Date: 09 May 2006
Method: Bootable CDROM netboot/mini.iso & FTP from ftp.citylink.co.nz

Machine: HP D530 SFF
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory: 512mb DDR 333
Root Device: IDE /dev/hda

Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1          34      273073+  83  Linux
/dev/hda2              35       14593   116945167+   5  Extended
/dev/hda5              35         642     4883728+  83  Linux
/dev/hda6             643        1007     2931831   83  Linux
/dev/hda7            1008        1197     1526143+  82  Linux swap / Solaris
/dev/hda8            1198        1246      393561   83  Linux
/dev/hda9            1247       14593   107209746   83  Linux

Filesystem            Size  Used Avail Use% Mounted on
/dev/hda1             250M   57M  180M  24% / (EXT3)
tmpfs                 249M     0  249M   0% /dev/shm
/dev/hda9             103G  3.5M  103G   1% /home (XFS)
/dev/hda8             380M  272K  380M   1% /tmp (XFS)
/dev/hda5             4.7G  751M  4.0G  16% /usr (XFS)
/dev/hda6             2.8G   99M  2.7G   4% /var (XFS)

Output of lspci and lspci -n:

0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated
Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
Storage Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:05:02.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5782 Gigabit Ethernet (rev 03)
0000:05:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 78)

lspci -n
0000:00:00.0 0600: 8086:2570 (rev 02)
0000:00:02.0 0300: 8086:2572 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:05:02.0 0200: 14e4:1696 (rev 03)
0000:05:09.0 0200: 10b7:9200 (rev 78)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]


Trouble free install. network configuration automatically tries DHCP,
would be nice if it asked you to try DHCP or manual - even thou I have
DHCP on the LAN I installed the box with, I have to Go Back and
manually configure the Gateway to a different one to get a direct
out to the internet.

I use XFS for my filesystems because its simply better than ext3,
maybe the installer could offer some basic information on each FS

Getting a 2.6 Kernel to work with Sarge is not a simple process, I
either have module problems, or kernel panic's on boot. I have stuck
with the  most
recent 2.4 kernel, this was a breeze to configure, compile and
install. Default kernel has a lot of stuff enabled that I just dont
and wont ever need.

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

Reply to: