Bug#365730: installation report (try 2)
Package: installation-reports
Boot method: usb flash drive (two different models attempted)
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (from 4/1/06)
Date: 5/02/06 07:20
Machine: Xserve G5 cluster node (headless), usb flash drive
Processor: Dual PowerPC970 (Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06)
Memory: 2GB
Partitions: none yet; testing installer bootability
Output of lspci and lspci -n: N/A
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Installer crashes with an oops, 'Unable to handle kernel paging request'.
Crash at same place in boot with two different usb sticks, but different
tasks and locations listed in the stack trace, which is strange.
Console log with Kingston DataTraveler:
Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06
Copyright 1994-2004 Apple Computer, Inc.
All Rights Reserved.
Welcome to Open Firmware, the system time and date is: 10:59:53 05/02/2006
To continue booting, type "mac-boot" and press return.
To shut down, type "shut-down" and press return.
0 > dev /ht/pci@4 ls
ff9b1b98: /usb@b
ff9f1a70: /disk@1
ff9b9bd0: /usb@b,1
ff9c1c08: /usb@b,2
ok
0 > devalias cd /ht/pci@4/usb@b/disk@1 ok
0 > dir cd:,\ -
Debian/PowerPC_etch
Size/ GMT File/Dir
bytes date time TYPE CRTR Name
1/ 1/ 4 0: 0: 0 .disk
1/ 1/ 4 0: 0: 0 dists
1/ 1/ 4 0: 0: 0 doc
1/ 1/ 4 0: 0: 0 etc
1/ 1/ 4 0: 0: 0 *install
51259 4/21/ 6 2:21:19 ???? ???? md5sum.txt
1/ 1/ 4 0: 0: 0 pics
1/ 1/ 4 0: 0: 0 pool
1/ 1/ 4 0: 0: 0 ppc
10293 4/21/ 6 2:20:46 ???? ???? README.html
72722 1/13/ 6 21:52:32 ???? ???? README.mirrors.html
39849 1/13/ 6 21:52:32 ???? ???? README.mirrors.txt
5327 4/21/ 6 2:20:46 ???? ???? README.txt
1/ 1/ 4 0: 0: 0 tools
ok
0 > dir cd:,\install \
SOF timeout
Size/ GMT File/Dir
bytes date time TYPE CRTR Name
781 4/21/ 6 2:20:47 ???? ???? boot.msg
1855 4/21/ 6 2:20:47 tbxi UNIX ofboot.b
2319 4/21/ 6 2:20:47 ???? ???? pegasos
1/ 1/ 4 0: 0: 0 powerpc
1/ 1/ 4 0: 0: 0 powerpc64
149740 3/ 2/ 6 16:11: 8 boot UNIX yaboot
1138 4/21/ 6 2:20:47 conf UNIX yaboot.conf
ok
0 > boot cd:,\install\yaboot load-size=248ec adler32=881546ed
Loading ELF
Config file read, 1138 bytes
Welcome to Debian GNU/Linux etch!
This is a Debian installation CDROM,
built on 20060421.
The default option is 'install'. For maximum
control, you can use the 'expert' option.
If the system fails to boot at all (the typical
symptom is a white screen which doesn't go away),
use 'install video=ofonly' or 'expert video=ofonly'.
The plain options are for the powerpc family of
processors (from 601 to G4). The *64 options are for
64bit powerpc processors, which include the IBM
Power3, Power4, Power5, ... boxes, as well as the
Apple G5 boxes. Press the tab key for a list of
options, or type 'help' for help.
************************************
If in doubt, just choose 'install', and if that
doesn't work, try 'install video=ofonly'.
************************************
Welcome to yaboot version 1.3.13
Enter "help" to get some basic usage information
WARNING: Bootstrap partition type is wrong: "Apple_HFS"
type should be: "Apple_Bootstrap"
boot:
* install expert install64
expert64
boot: expert64 debug
Please wait, loading kernel...
Elf64 kernel loaded...
Loading ramdisk...
ramdisk loaded at 01a00000, size: 3522 Kbytes
OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020
command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- debug
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000001d71000
alloc_top : 0000000020000000
alloc_top_hi : 0000000080000000
rmo_top : 0000000020000000
ram_top : 0000000080000000
Looking for displays
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000001e72000 -> 0x0000000001e7336e
Device tree struct 0x0000000001e74000 -> 0x0000000001e87000
Calling quiesce ...
DO-QUIESCE finishedreturning from prom_init
Page orders: linear mapping = 24, others = 12
Found initrd at 0xc000000001a00000:0xc000000001d70a95
U3-DART: table not allocated, using direct DMA
trying to initialize btext ...
boot stdout isn't a display !
Starting Linux PPC64 #2 SMP Tue Feb 21 18:46:53 UTC 2006
-----------------------------------------------------
ppc64_pft_size = 0x0
ppc64_interrupt_controller = 0x1
platform = 0x400
physicalMemorySize = 0x80000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0xc00000007c000000
htab_hash_mask = 0x3ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.15-1-powerpc64 (Debian 2.6.15-7) (waldi@debian.org) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 SMP Tue Feb 21 18:46:53 UTC 2006
[boot]0012 Setup Arch
Top of RAM: 0x80000000, Total RAM: 0x80000000
Memory hole size: 0MB
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
Can't get bus-range for /ht@0,f2000000
PCI Host 0, io start: 400000; io end: bfffff
PCI Host 1, io start: 0; io end: 3fffff
Found U3 memory controller & host bridge, revision: 53
Mapped at 0xd000080082002000
Found a K2 mac-io controller, rev: 96, mapped at 0xd000080082043000
PowerMac motherboard: XServe G5
Using native/NAP idle loop
via-pmu: Server Mode is enabled
PMU driver 2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=114, gen1=115
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
On node 0 totalpages: 524288
DMA zone: 524288 pages, LIFO batch:31
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
[boot]0015 Setup Done
Built 1 zonelists
Kernel command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- debug
PowerMac using OpenPIC irq controller at 0x80040000
mpic: Setting up MPIC " OpenPIC " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
Slave OpenPIC at 0xf8040000 hooked on IRQ 56
mpic: Setting up MPIC " U3-MPIC " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 2000.000000 MHz
Console: colour dummy device 80x25
serial8250_console_init: nothing to do on PowerMac
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
freeing bootmem node 0
Memory: 2019928k/2097152k available (3360k kernel code, 77224k reserved, 912k data, 336k bss, 232k init)
Calibrating delay loop... 66.56 BogoMIPS (lpj=33280)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
PowerMac SMP probe found 2 cpus
Timebase clock is Pulsar chip
requesting IPIs ...
IPIs requested...
Processor 1 found.
Brought up 2 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 3522k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
Can't get ranges for PCI-PCI bridge /ht@0,f2000000/pci@1
mapping IO f0000000 -> d000080000400000, size: 800000
mapping IO f4000000 -> d000080000000000, size: 400000
PCI: Probing PCI hardware done
Registering pmac pic with sysfs...
nvram_init: Could not find nvram partition for nvram buffered error logging.
audit: initializing netlink socket (disabled)
audit(1146567771.823:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
vio_register_driver: driver hvc_console registering
HVSI: registered 0 devices
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
MacIO PCI driver attached to K2 chipset
PowerMac G5 Thermal control driver 1.2b2
Detected fan controls:
0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
1: RPM fan, id 2, location: DRIVE BAY
2: PWM fan, id 2, location: SLOT,PCI FAN
3: RPM fan, id 3, location: CPU A INTAKE
4: RPM fan, id 4, location: CPU A EXHAUST
5: RPM fan, id 5, location: CPU B INTAKE
6: RPM fan, id 6, location: CPU B EXHAUST
9: RPM fan, id 1, location: CPU A 1
10: RPM fan, id 2, location: CPU A 2
11: RPM fan, id 3, location: CPU A 3
12: RPM fan, id 4, location: CPU B 1
13: RPM fan, id 5, location: CPU B 2
14: RPM fan, id 6, location: CPU B 3
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI: Enabling device: (0001:03:0d.0), cmd 16
ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
mice: PS/2 mouse device common for all mice
Found KeyWest i2c on "u3", 2 channels, stepping: 4 bits
Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 232k freed
Failed to execute /linuxrc. Attempting defaults...
Setting up filesystem, please wait ...
Unable to handle kernel paging request for data at address 0xc00000007cf47200
Faulting instruction address: 0xc000000000032310
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=32 NUMA POWERMAC
Modules linked in:
NIP: C000000000032310 LR: C0000000000300B8 CTR: 0000000000000004
REGS: c00000007e2079a0 TRAP: 0300 Not tainted (2.6.15-1-powerpc64)
MSR: 9000000000001032 <ME,IR,DR> CR: 28002842 XER: 00000000
DAR: C00000007CF47200, DSISR: 0000000040010000
TASK = c000000001a307f0[271] 'debian-installe' THREAD: c00000007e204000 CPU: 1
GPR00: 000000514FBD3B00 C00000007E207C20 C00000000042FCA0 0000000000F47200
GPR04: 0000000000000197 28A7DE9D8013C5D0 0000000000000000 0000000000000000
GPR08: 000028A7DE9D8000 000000514FBD3B00 0000000000000008 C00000007CF47200
GPR12: 100000000000D032 C00000000036B400 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000002 0000000000000000 00000000FF8E1F89
GPR24: 0000000000000000 0000000000000004 0000000000000000 000000000003FFFF
GPR28: 000000028A7DE8E4 28A7DE9D8013C5D0 0000000000000000 0000000FC3DA0597
NIP [C000000000032310] .native_hpte_updatepp+0x68/0x290
LR [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18
Call Trace:
[C00000007E207C20] [C000000000032420] .native_hpte_updatepp+0x178/0x290 (unreliable)
[C00000007E207CC0] [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18
[C00000007E207DC0] [C00000000002FD48] .hash_page+0x13c/0x158
[C00000007E207E30] [C000000000004734] .do_hash_page+0x34/0x40
Instruction dump:
7cbd2b78 7d290214 78a04dc2 e9290010 e96b0000 7c094878 7d6b1a14 79283e24
419e0008 61080004 39400008 7c0006ac <7d2058a8> 7d205378 7c0059ad 40a2fff4
End of console log with Corsair voyager:
.
.
.
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 232k freed
Failed to execute /linuxrc. Attempting defaults...
Setting up filesystem, please wait ...
Unable to handle kernel paging request for data at address 0xc00000007c7e8880
Faulting instruction address: 0xc000000000032310
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=32 NUMA POWERMAC
Modules linked in:
NIP: C000000000032310 LR: C0000000000300B8 CTR: 0000000000001FEF
REGS: c00000007e2079a0 TRAP: 0300 Not tainted (2.6.15-1-powerpc64)
MSR: 9000000000001032 <ME,IR,DR> CR: 28002422 XER: 00000000
DAR: C00000007C7E8880, DSISR: 0000000040010000
TASK = c00000007fc637f0[243] '[' THREAD: c00000007e204000 CPU: 1
GPR00: 000001730D805FBF C00000007E207C20 C00000000042FCA0 00000000007E8880
GPR04: 0000000000000196 B986C02FDFFEC000 0000000000000000 0000000000000001
GPR08: 0000B986C02FDF80 000001730D805FBF 0000000000000008 C00000007C7E8880
GPR12: 100000000200F032 C00000000036B400 00000000FF94D8C0 0000000000000000
GPR16: 00000000F800F750 00000000F7FE5C5C 000000000FF315C4 000000000FF2D874
GPR20: 00000000F800F750 00000000FF94D89C 000000000FF3AC8C 00000000F7FFBB00
GPR24: 0000000000000000 000000000FF2C000 00000000F7FE5AB0 000000000003FFFF
GPR28: 0000000B986CFD11 B986C02FDFFEC000 0000000000000000 0000000FF8B20797
NIP [C000000000032310] .native_hpte_updatepp+0x68/0x290
LR [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18
Call Trace:
[C00000007E207C20] [C00000007E207CD0] 0xc00000007e207cd0 (unreliable)
[C00000007E207CC0] [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18
[C00000007E207DC0] [C00000000002FD48] .hash_page+0x13c/0x158
[C00000007E207E30] [C000000000004734] .do_hash_page+0x34/0x40
Instruction dump:
7cbd2b78 7d290214 78a04dc2 e9290010 e96b0000 7c094878 7d6b1a14 79283e24
419e0008 61080004 39400008 7c0006ac <7d2058a8> 7d205378 7c0059ad 40a2fff4
Reply to: