Bug#365439: installation report
Package: installation-reports
Boot method: CD
Image version: Daily build netinstall built on 20060426
Date: Sun Apr 30 02:32:52 GMT/BST 2006
Machine: Fujitsu Lifebook P7120
Processor: Intel Centrino
Memory: 1GB
Partitions:
Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 1306 10490413+ 7 HPFS/NTFS
/dev/hda4 1307 7296 48114675 5 Extended
/dev/hda5 1307 1337 248976 83 Linux
/dev/hda6 1338 1860 4200966 83 Linux
/dev/hda7 1861 2109 2000061 83 Linux
/dev/hda8 * 2110 2140 248976 83 Linux
/dev/hda9 2141 2663 4200966 83 Linux
/dev/hda10 2664 2912 2000061 83 Linux
/dev/hda11 2913 3099 1502046 82 Linux swap / Solaris
/dev/hda12 3100 3375 2216938+ b W95 FAT32
/dev/hda13 3376 4682 10498446 83 Linux
/dev/hda14 4683 5989 10498446 83 Linux
/dev/hda15 5990 7296 10498446 83 Linux
This install used only:
hda8 - /
hda9 - /usr
hda10 - /var
hda11 - swap
Output of lspci and lspci -n:
No 'lspci' on the system after the install :-/
Following produced by earlier system install:
digbyt@fujitsu:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
0000:06:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:06:03.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
0000:06:03.2 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
0000:06:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
0000:06:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03)
0000:06:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:06:05.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05)
digbyt@fujitsu:~$ lspci -n
0000:00:00.0 0600: 8086:2590 (rev 04)
0000:00:02.0 0300: 8086:2592 (rev 04)
0000:00:02.1 0380: 8086:2792 (rev 04)
0000:00:1b.0 0403: 8086:2668 (rev 04)
0000:00:1d.0 0c03: 8086:2658 (rev 04)
0000:00:1d.1 0c03: 8086:2659 (rev 04)
0000:00:1d.2 0c03: 8086:265a (rev 04)
0000:00:1d.3 0c03: 8086:265b (rev 04)
0000:00:1d.7 0c03: 8086:265c (rev 04)
0000:00:1e.0 0604: 8086:2448 (rev d4)
0000:00:1f.0 0601: 8086:2641 (rev 04)
0000:00:1f.1 0101: 8086:266f (rev 04)
0000:00:1f.2 0101: 8086:2653 (rev 04)
0000:00:1f.3 0c05: 8086:266a (rev 04)
0000:06:03.0 0607: 1180:0476 (rev b3)
0000:06:03.1 0c00: 1180:0552 (rev 08)
0000:06:03.2 0805: 1180:0822 (rev 17)
0000:06:03.3 0880: 1180:0592 (rev 08)
0000:06:03.4 0880: 1180:0852 (rev 03)
0000:06:04.0 0200: 10ec:8139 (rev 10)
0000:06:05.0 0280: 8086:4223 (rev 05)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O] (not wireless)
Config network: [O]
Detect CD: [O] (with 'install libata.atapi_enabled=1')
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Selected install options:
Language "English", Country "United Kingdom", keymap "American English"
Packages "Laptop + Standard System"
"Local only" Exim config.
Mirror country "UK", Mirro "debian.hands.com", no proxy
Selected 3 existing partitions for /, /usr, /var
Notes.
1. still required 'install libata.atapi_enabled=1' to detect CD
could this perhaps be added to the "special boot parameters
various hardware" F6 page?
2. Intel IW2200 wireless device still not supported for install
3. Mouse type selection for built in pointing devices is difficult
without hardware detection help...
Why two levels of selection? On one screen I selected "/dev/psaux"
and on the next I selected "auto"
4. On rebooting after first stage of install, only a console login
appears. There is still no working X windows system.
5. xorg.conf still has wrong driver (was vesa, should be i810), and
wrong keyboard (was "gb", but should be "us"). During install my
geographic location was entered as GB, but keyboard layout entered
as US.
6. This time, after performing
apt-get install x-window-system-core x-window-system
I could start an X server, but there were still not enough components
to start a basic xdm based session.
Running 'startx' produced an X display with the message:
"Xsession: unable to start X session --- no "/root/.xsession" file,
no "/root/Xsession" file, no session managers, no windows managers,
and no terminal emulators found; aborging."
Regards,
DigbyT
--
Digby R. S. Tarvin digbyt(at)digbyt.com
http://www.digbyt.com
Reply to: