Your message dated Sat, 1 Apr 2006 07:54:21 +0200 with message-id <20060401055421.GJ32115@djedefre.onera> and subject line Bug is over has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: BUG REPORT installation report
- From: andre Lasfargues <andre.lasfargues@wanadoo.fr>
- Date: Thu, 24 Mar 2005 21:00:45 +0100
- Message-id: <1111694445.5589.3.camel@localhost>
Package: installation-reports Debian-installer-version: RC3 23/03/05 from debian mirror uname -a: Linux andec 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686 GNU/Linux Date: 24/03/05 16:00:00 Method: Netinst image and ftp2.fr.debian.org after reboot Machine: VIA A7V600 Processor:AMD ATHLON XP 2600+ Memory: 512 M Root Device: SATA DRIVE on /dev/sda5 Root Size/partition table: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/sda5 / ext3 defaults,errors=remount-ro 0 1 /dev/hda2 none swap sw 0 0 /dev/hdb /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/hdc /media/cdrom1 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 0000:00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12) 0000:00:0d.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 0000:00:0e.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12) 0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) lspci -n : 0000:00:00.0 0600: 1106:3189 (rev 80) 0000:00:01.0 0604: 1106:b198 0000:00:09.0 0200: 10b7:1700 (rev 12) 0000:00:0d.0 0c00: 104c:8023 0000:00:0e.0 0400: 109e:0350 (rev 12) 0000:00:0f.0 0104: 1106:3149 (rev 80) 0000:00:0f.1 0101: 1106:0571 (rev 06) 0000:00:10.0 0c03: 1106:3038 (rev 81) 0000:00:10.1 0c03: 1106:3038 (rev 81) 0000:00:10.2 0c03: 1106:3038 (rev 81) 0000:00:10.3 0c03: 1106:3038 (rev 81) 0000:00:10.4 0c03: 1106:3104 (rev 86) 0000:00:11.0 0601: 1106:3227 0000:00:11.5 0401: 1106:3059 (rev 60) 0000:01:00.0 0300: 1002:4150 0000:01:00.1 0380: 1002:4170 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: On the first reboot the french keymap is not present and i stay with a qwerty one. Run Language-env with french Need to run dpkg-reconfigure console-data Need to configure the right keyboard in gnome>Preferences>keyboard It was with a US Keyboard Apart of the above it is really a great moment perhaps too fast for the initial install and i'm happy happy for the good work all of you have done. I have had problems with my SATA drive in the past with other distribs and i wanted to install on it for sure and it sucks !!! BRAVO A TOUS BONUS: dmesg : 4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 511732k/524272k available (1335k kernel code, 11744k reserved, 733k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3776.51 BogoMIPS Security Scaffold v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 CPU: AMD Athlon(TM) XP 2600+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1905.0062 MHz. ..... host bus clock speed is 331.0315 MHz. checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4312k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled. ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fa100 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa130, dseg 0xf0000 pnp: 00:12: ioport range 0xe400-0xe47f has been reserved PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 B1 11 001 01 1 1 0 1 0 1 1 B9 12 001 01 1 1 0 1 0 1 1 A9 13 000 00 1 0 0 0 0 0 0 00 14 001 01 1 1 0 1 0 1 1 C1 15 001 01 1 1 0 1 0 1 1 C9 16 001 01 1 1 0 1 0 1 1 D1 17 000 00 1 0 0 0 0 0 0 00 Using vector-based indexing IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ177 -> 0:16 IRQ185 -> 0:17 IRQ169 -> 0:18 IRQ193 -> 0:20 IRQ201 -> 0:21 IRQ209 -> 0:22 .................................... done. Simple Boot Flag at 0x3a set to 0x1 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9 PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9 PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9 PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9 PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 EISA: Probing bus 0 at eisa0 Cannot allocate resource for EISA slot 8 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4312 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 204k freed vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 SCSI subsystem initialized libata version 1.02 loaded. sata_via version 0.20 ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 193 sata_via(0000:00:0f.0): routed to hard irq line 0 ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA000 irq 193 ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0xA008 irq 193 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via Using anticipatory io scheduler Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: Maxtor 6Y080L0, ATA DISK drive hdb: DVD-ROM BDV316E, ATAPI CD/DVD-ROM drive hdc: PHILIPS CDRW2412A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Adding 999928k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on sda5, internal journal Generic RTC Driver v1.07 hdb: ATAPI 40X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org> Capability LSM initialized mice: PS/2 mouse device common for all mice ts: Compaq touchscreen protocol output ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 177 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[bd800000-bd8007ff] Max Packet=[2048] ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 169 sk98lin: Network Device Driver v6.23 (C)Copyright 1999-2004 Marvell(R). ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 169 eth0: 3Com Gigabit LOM (3C940) PrefPort:A RlmtMode:Check Link State VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 193 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 VP_IDE: port 0x01f0 already claimed by ide0 VP_IDE: port 0x0170 already claimed by ide1 VP_IDE: neither IDE port enabled (BIOS) Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209 via82cxxx: Six channel audio available PCI: Setting latency timer of device 0000:00:11.5 to 64 via82cxxx: timeout while reading AC97 codec (0xAA0000) ac97_codec: AC97 Audio codec, id: ADS112 (Unknown) via82cxxx: board #1 at 0xE000, IRQ 209 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: irq 201, io base 00009000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: irq 201, io base 00008800 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: irq 201, io base 00008400 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001b700000176b9] uhci_hcd 0000:00:10.3: irq 201, io base 00008000 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new low speed USB device using address 2 ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org> ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: irq 201, pci mem e0a4f000 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 usb 1-2: can't set config #1, error -71 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xf8000000 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 usb 1-2: new low speed USB device using address 4 usb 3-1: new full speed USB device using address 2 usbcore: registered new driver hiddev Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 185 bttv0: Bt848 (rev 18) at 0000:00:0e.0, irq: 185, latency: 32, mmio: 0xbf800000 bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init] bttv: readee error bttv0: using tuner=-1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 hiddev96: USB HID v1.00 Device [American Power Conversion Back-UPS ES/CyberFort 500 FW: 4.1.I U] on usb-0000:00:10.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Bluetooth: Core ver 2.6 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.7 usbcore: registered new driver hci_usb parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] inserting floppy driver for 2.6.8-2-386 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: PC Speaker NET: Registered protocol family 17 eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled ________________________________________________________________________
--- End Message ---
--- Begin Message ---
- To: 301259-done@bugs.debian.org
- Subject: Bug is over
- From: Christian Perrier <bubulle@debian.org>
- Date: Sat, 1 Apr 2006 07:54:21 +0200
- Message-id: <20060401055421.GJ32115@djedefre.onera>
This bug about "French keyboard not properly loading in second stage" has not been reproduced on my side with the etch installer (all versions). Hence closing it. --Attachment: signature.asc
Description: Digital signature
--- End Message ---