Bug#355547: marked as done (kernel 2.6.15-1-486 installed on a P III)
Your message dated Mon, 06 Mar 2006 13:07:29 +0100
with message-id <200603061307.29637.aragorn@tiscali.nl>
and subject line Bug#355547: installation report
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
Boot method: CD
Image version: Netinst beta2 test build (i386), 3rd March 2006
Date: 6th March 2006
Machine: Dell Optiplex GX1.
Processor: PIII-450
Memory: 256Mb
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda1 ext3 9408480 381244 8549304 5% /
tmpfs tmpfs 128468 0 128468 0% /dev/shm
tmpfs tmpfs 128468 68 128400 1% /dev
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
(rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
(rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152
(rev 03)
0000:00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 24)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
AGP 1X/2X (rev 5c)
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0f.0 0604: 1011:0024 (rev 03)
0000:00:11.0 0200: 10b7:9055 (rev 24)
0000:01:00.0 0300: 1002:4742 (rev 5c)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Problem: The system installed the 486 kernel package(2.6.15-1-486),
despite the fact that I have a 686 (Pentium III) processor.
--- End Message ---
--- Begin Message ---
On Monday 06 March 2006 12:38, Stephen Walker wrote:
> Comments/Problems:
> Problem: The system installed the 486 kernel package(2.6.15-1-486),
> despite the fact that I have a 686 (Pentium III) processor.
That is probably because you used a netinst image for the installation
which, to reduce size, only has the generic 486 kernel on it.
If you had used any other installation method, I am sure you would have
gotten the 686 kernel.
Anyway, you can easily switch to the 686 kernel after the installation.
Closing your report as there were no real issues. Thanks very much for
submitting your installation report and good luck with your new system.
Cheers,
FJP
--- End Message ---
Reply to: