Bug#354819: installation-report: problems detecting partitions created by Disk Utility
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/etch_d-i/20060225/powerpc/iso-cd/debian-testing-powerpc-netinst.iso
Date: netinst from 2006-02-25
Machine: Mac Mini (PowerPC 1.42Ghz)
Partitions:
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap bootstrap 1600 @ 64 (800.0k) NewWorld bootblock
/dev/hda3 Swap swap 2097152 @ 1664 ( 1.0G) Unknown
/dev/hda4 Apple_UNIX_SVR2 root 115389448 @ 2098816 ( 55.0G) Linux native
/dev/hda5 Apple_Boot eXternal booter 262144 @ 117488264 (128.0M) Unknown
/dev/hda6 Apple_HFSX Apple_HFSX_Untitled_1 38551064 @ 117750408 ( 18.4G) Unknown
/dev/hda7 Apple_Free 16 @ 156301472 ( 8.0k) Free space
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [O]
Install boot loader: [E]
Installed system ok: [O]
Comments/Problems:
I partitioned the hard disk from OS X Installer's Disk Utility, basically
creating a 18GB HFS+ partition at the end of the disk for MacOS X and
leaving the rest of the disk free.
The installer completely failed to detect the partitions, and only offered
me to repartition my whole hard disk again.
I switched to the consolea and run mac-fdisk, which detected correctly the
partitions. I created the required partitions (Apple_Bootstrap, Swap and root)
with mac-fdisk and wrote the results to disk.
Afterwards I created and ext3 filesystem in the root partition, swap space
in the swap partition, ..., created the /target dir and mounted /dev/hda3
there.
As the installer didn't allowed me to continue I deleted "partman" invocation
from /var/lib/dpkg/info/partman-base.postinst, that way I managed to continue
with the installation.
yaboot had problems again because it tries to get information from partman,
so I edited /var/lib/dpkg/info/bootloader-install.postinst (or whatever is
named) to hardcode the Apple_Bootstrap partition there instead of asking
to partman and I finished the installation successfully.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release file:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060225)"
==============================================
Hardware information for installed system:
==============================================
umame -a: Linux sweetie 2.6.15-1-powerpc #2 Tue Feb 21 18:37:40 UTC 2006 ppc unknown
lspci -v -t: -+-[20]-+-0b.0 Apple Computer Inc. UniNorth 2 Internal PCI
lspci -v -t: | +-0d.0 Apple Computer Inc. UniNorth/Intrepid ATA/100
lspci -v -t: | +-0e.0 Apple Computer Inc. UniNorth 2 FireWire
lspci -v -t: | \-0f.0 Apple Computer Inc. UniNorth 2 GMAC (Sun GEM)
lspci -v -t: +-[10]-+-0b.0 Apple Computer Inc. UniNorth 2 PCI
lspci -v -t: | +-12.0 Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
lspci -v -t: | +-17.0 Apple Computer Inc. KeyLargo/Intrepid Mac I/O
lspci -v -t: | +-18.0 Apple Computer Inc. KeyLargo/Intrepid USB
lspci -v -t: | +-19.0 Apple Computer Inc. KeyLargo/Intrepid USB
lspci -v -t: | +-1a.0 Apple Computer Inc. KeyLargo/Intrepid USB
lspci -v -t: | +-1b.0 NEC Corporation USB
lspci -v -t: | +-1b.1 NEC Corporation USB
lspci -v -t: | \-1b.2 NEC Corporation USB 2.0
lspci -v -t: \-[00]-+-0b.0 Apple Computer Inc. UniNorth 2 AGP
lspci -v -t: \-10.0 ATI Technologies Inc RV280 [Radeon 9200]
lspci -n: 0000:00:0b.0 0600: 106b:0034
lspci -n: 0000:00:10.0 0300: 1002:5962 (rev 01)
lspci -n: 0001:10:0b.0 0600: 106b:0035
lspci -n: 0001:10:12.0 0280: 14e4:4318 (rev 02)
lspci -n: 0001:10:17.0 ff00: 106b:003e
lspci -n: 0001:10:18.0 0c03: 106b:003f
lspci -n: 0001:10:19.0 0c03: 106b:003f
lspci -n: 0001:10:1a.0 0c03: 106b:003f
lspci -n: 0001:10:1b.0 0c03: 1033:0035 (rev 43)
lspci -n: 0001:10:1b.1 0c03: 1033:0035 (rev 43)
lspci -n: 0001:10:1b.2 0c03: 1033:00e0 (rev 04)
lspci -n: 0002:20:0b.0 0600: 106b:0036
lspci -n: 0002:20:0d.0 ff00: 106b:003b
lspci -n: 0002:20:0e.0 0c00: 106b:0031 (rev 81)
lspci -n: 0002:20:0f.0 0200: 106b:0032 (rev 80)
lspci -v: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -v: Capabilities: [80] AGP version 1.0
lspci -v:
lspci -v: 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
lspci -v: Subsystem: ATI Technologies Inc RV280 [Radeon 9200]
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 48
lspci -v: Memory at 98000000 (32-bit, prefetchable) [size=128M]
lspci -v: I/O ports at f0000400 [size=256]
lspci -v: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
lspci -v: Expansion ROM at f1000000 [disabled] [size=128K]
lspci -v: Capabilities: [58] AGP version 2.0
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -v:
lspci -v: 0001:10:12.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
lspci -v: Subsystem: Apple Computer Inc.: Unknown device 4318
lspci -v: Flags: bus master, fast devsel, latency 16, IRQ 52
lspci -v: Memory at 80084000 (32-bit, non-prefetchable) [disabled] [size=8K]
lspci -v:
lspci -v: 0001:10:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
lspci -v: Flags: bus master, medium devsel, latency 16
lspci -v: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
lspci -v:
lspci -v: 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10)
lspci -v: Flags: medium devsel
lspci -v:
lspci -v: 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10)
lspci -v: Flags: medium devsel
lspci -v:
lspci -v: 0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10)
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 29
lspci -v: Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10)
lspci -v: Subsystem: NEC Corporation USB
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -v: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10)
lspci -v: Subsystem: NEC Corporation USB
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -v: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20)
lspci -v: Subsystem: NEC Corporation USB 2.0
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -v: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -v:
lspci -v: 0002:20:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 39
lspci -v: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
lspci -v:
lspci -v: 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) (prog-if 10)
lspci -v: Subsystem: Apple Computer Inc.: Unknown device 5811
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 40
lspci -v: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
lspci -v: Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41
lspci -v: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
lspci -v: Expansion ROM at f5100000 [disabled] [size=1M]
lspci -v:
lspci -x: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
lspci -x: 00: 6b 10 34 00 16 00 b0 22 00 00 00 06 08 10 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
lspci -x: 00: 02 10 62 59 07 00 b0 02 01 00 00 03 08 ff 00 00
lspci -x: 10: 08 00 00 98 01 04 00 00 00 00 00 90 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 62 59
lspci -x: 30: 01 00 00 f1 58 00 00 00 00 00 00 00 30 01 08 00
lspci -x:
lspci -x: 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
lspci -x: 00: 6b 10 35 00 16 00 a0 22 00 00 00 06 08 10 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0001:10:12.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
lspci -x: 00: e4 14 18 43 04 00 00 00 02 00 80 02 00 10 00 00
lspci -x: 10: 00 40 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 18 43
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 34 01 00 00
lspci -x:
lspci -x: 0001:10:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
lspci -x: 00: 6b 10 3e 00 06 00 00 02 00 00 00 ff 08 10 00 00
lspci -x: 10: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
lspci -x: 00: 6b 10 3f 00 00 00 00 02 00 10 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 03 56
lspci -x:
lspci -x: 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
lspci -x: 00: 6b 10 3f 00 00 00 00 02 00 10 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 03 56
lspci -x:
lspci -x: 0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
lspci -x: 00: 6b 10 3f 00 06 00 00 02 00 10 03 0c 08 10 00 00
lspci -x: 10: 00 30 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 1d 01 03 56
lspci -x:
lspci -x: 0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)
lspci -x: 00: 33 10 35 00 06 00 10 02 43 10 03 0c 08 10 80 00
lspci -x: 10: 00 20 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 3f 01 01 2a
lspci -x:
lspci -x: 0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)
lspci -x: 00: 33 10 35 00 06 00 10 02 43 10 03 0c 08 10 00 00
lspci -x: 10: 00 10 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 3f 02 01 2a
lspci -x:
lspci -x: 0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
lspci -x: 00: 33 10 e0 00 16 00 10 02 04 20 03 0c 08 10 00 00
lspci -x: 10: 00 00 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 e0 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 3f 03 10 22
lspci -x:
lspci -x: 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
lspci -x: 00: 6b 10 36 00 16 00 a0 22 00 00 00 06 08 10 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0002:20:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
lspci -x: 00: 6b 10 3b 00 06 00 00 82 00 00 00 ff 08 20 00 00
lspci -x: 10: 00 40 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
lspci -x: 00: 6b 10 31 00 06 00 90 02 81 10 00 0c 08 40 00 00
lspci -x: 10: 00 00 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 11 58
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 28 01 0c 18
lspci -x:
lspci -x: 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
lspci -x: 00: 6b 10 32 00 16 00 a0 84 80 00 00 02 08 10 00 00
lspci -x: 10: 00 00 20 f5 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 10 f5 00 00 00 00 00 00 00 00 29 01 40 40
lspci -x:
lsmod: Module Size Used by
lsmod: nls_utf8 2240 0
lsmod: hfsplus 89156 0
lsmod: xfs 533428 0
lsmod: exportfs 6464 1 xfs
lsmod: reiserfs 331896 0
lsmod: jfs 201384 0
lsmod: hfs 58020 0
lsmod: ext3 154632 0
lsmod: jbd 68564 1 ext3
lsmod: vfat 14688 0
lsmod: fat 59836 1 vfat
lsmod: ext2 79816 1
lsmod: mbcache 10980 2 ext3,ext2
lsmod: eth1394 23016 0
lsmod: sungem 37188 0
lsmod: sungem_phy 10080 1 sungem
lsmod: sr_mod 20420 0
lsmod: sbp2 26340 0
lsmod: isofs 40248 0
lsmod: ide_cd 47460 0
lsmod: cdrom 44028 2 sr_mod,ide_cd
lsmod: ide_disk 19648 2
lsmod: aec62xx 8128 0 [permanent]
lsmod: cmd64x 12412 0 [permanent]
lsmod: generic 4772 0 [permanent]
lsmod: hpt34x 5536 0 [permanent]
lsmod: ns87415 4868 0 [permanent]
lsmod: pdc202xx_new 11328 0 [permanent]
lsmod: pdc202xx_old 12000 0 [permanent]
lsmod: sc1200 9312 0 [permanent]
lsmod: siimage 13920 0 [permanent]
lsmod: sl82c105 7552 0 [permanent]
lsmod: trm290 4898 0 [permanent]
lsmod: via82cxxx 10340 0 [permanent]
lsmod: usb_storage 78960 0
lsmod: scsi_mod 169828 3 sr_mod,sbp2,usb_storage
lsmod: usbhid 55140 0
lsmod: ohci1394 40564 0
lsmod: ieee1394 428176 3 eth1394,sbp2,ohci1394
lsmod: ehci_hcd 36712 0
lsmod: ohci_hcd 23780 0
lsmod: usbcore 147136 5 usb_storage,usbhid,ehci_hcd,ohci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 29088 73312 28% /
df: tmpfs 257564 464 257100 0% /dev
df: tmpfs 257564 464 257100 0% /dev
df: tmpfs 257564 464 257100 0% /.dev
df: /dev/hda4 56787768 622708 53280324 1% /target
free: total used free shared buffers
free: Mem: 515128 464940 50188 0 10376
free: Swap: 0 0 0
free: Total: 515128 464940 50188
cardctl status: /usr/bin/report-hw: 32: cardctl: not found
cardctl ident: /usr/bin/report-hw: 33: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: cpu : 7447A, altivec supported
/proc/cpuinfo: clock : 1499MHz
/proc/cpuinfo: revision : 0.5 (pvr 8003 0105)
/proc/cpuinfo: bogomips : 1495.04
/proc/cpuinfo: machine : PowerMac10,2
/proc/cpuinfo: motherboard : PowerMac10,2 MacRISC3 Power Macintosh
/proc/cpuinfo: detected as : 287 (Unknown Intrepid-based)
/proc/cpuinfo: pmac flags : 00000000
/proc/cpuinfo: L2 cache : 512K unified
/proc/cpuinfo: memory : 512MB
/proc/cpuinfo: pmac-generation : NewWorld
/proc/ioports: 00000000-007fffff : /pci@f2000000
/proc/ioports: 00802000-01001fff : /pci@f0000000
/proc/ioports: 00802400-008024ff : 0000:00:10.0
/proc/ioports: ff7fe000-ffffdfff : /pci@f4000000
/proc/iomem: 80000000-8fffffff : /pci@f2000000
/proc/iomem: 80000000-8007ffff : 0001:10:17.0
/proc/iomem: 80000000-8007ffff : 0.80000000:mac-io
/proc/iomem: 80000050-8000007f : 0.00000050:gpio
/proc/iomem: 80008000-800080ff : 0.00010000:i2s
/proc/iomem: 80008100-800081ff : 0.00010000:i2s
/proc/iomem: 80008200-800082ff : 0.00010000:i2s
/proc/iomem: 80008300-800083ff : 0.00010000:i2s
/proc/iomem: 80008800-800088ff : 0.00020000:ata-3
/proc/iomem: 80008800-800088ff : ide-pmac (dma)
/proc/iomem: 80010000-80010fff : 0.00010000:i2s
/proc/iomem: 80013000-80013000 : 0.00013000:ch-b
/proc/iomem: 80013000-80013000 : pmac_zilog
/proc/iomem: 80013010-80013010 : 0.00013000:ch-b
/proc/iomem: 80013010-80013010 : pmac_zilog
/proc/iomem: 80013020-80013020 : 0.00013020:ch-a
/proc/iomem: 80013020-80013020 : pmac_zilog
/proc/iomem: 80013030-80013030 : 0.00013020:ch-a
/proc/iomem: 80013030-80013030 : pmac_zilog
/proc/iomem: 80013040-80013040 : 0.00013000:ch-b
/proc/iomem: 80013040-80013040 : pmac_zilog
/proc/iomem: 80013050-80013050 : 0.00013020:ch-a
/proc/iomem: 80013050-80013050 : pmac_zilog
/proc/iomem: 80015000-80015fff : 0.00015000:timer
/proc/iomem: 80016000-80017fff : 0.00016000:via-pmu
/proc/iomem: 80016000-80017fff : via-pmu
/proc/iomem: 80018000-80018fff : 0.00018000:i2c
/proc/iomem: 80020000-80020fff : 0.00020000:ata-3
/proc/iomem: 80020000-80020fff : ide-pmac (ports)
/proc/iomem: 80040000-8007ffff : interrupt-controller
/proc/iomem: 80040000-8007ffff : 0.00040000:interrup
/proc/iomem: 80080000-800800ff : 0001:10:1b.2
/proc/iomem: 80080000-800800ff : ehci_hcd
/proc/iomem: 80081000-80081fff : 0001:10:1b.1
/proc/iomem: 80081000-80081fff : ohci_hcd
/proc/iomem: 80082000-80082fff : 0001:10:1b.0
/proc/iomem: 80082000-80082fff : ohci_hcd
/proc/iomem: 80083000-80083fff : 0001:10:1a.0
/proc/iomem: 80083000-80083fff : ohci_hcd
/proc/iomem: 80084000-80085fff : 0001:10:12.0
/proc/iomem: 90000000-9fffffff : /pci@f0000000
/proc/iomem: 90000000-9000ffff : 0000:00:10.0
/proc/iomem: 90000000-9000ffff : radeonfb mmio
/proc/iomem: 98000000-9fffffff : 0000:00:10.0
/proc/iomem: 98000000-9fffffff : radeonfb framebuffer
/proc/iomem: f1000000-f1ffffff : /pci@f0000000
/proc/iomem: f1000000-f101ffff : 0000:00:10.0
/proc/iomem: f3000000-f3ffffff : /pci@f2000000
/proc/iomem: f5000000-f5ffffff : /pci@f4000000
/proc/iomem: f5000000-f5000fff : 0002:20:0e.0
/proc/iomem: f5000000-f50007ff : ohci1394
/proc/iomem: f5004000-f5007fff : 0002:20:0d.0
/proc/iomem: f5004000-f5007fff : Kauai ATA
/proc/iomem: f5200000-f53fffff : 0002:20:0f.0
/proc/iomem: f5200000-f53fffff : sungem
/proc/iomem: f8000000-f8ffffff : uni-n
/proc/interrupts: CPU0
/proc/interrupts: 25: 0 OpenPIC Level VIA-PMU
/proc/interrupts: 26: 0 OpenPIC Level keywest i2c
/proc/interrupts: 29: 96 OpenPIC Level ohci_hcd:usb1
/proc/interrupts: 39: 27671 OpenPIC Level ide0
/proc/interrupts: 40: 2 OpenPIC Level ohci1394
/proc/interrupts: 41: 67318 OpenPIC Level eth1
/proc/interrupts: 42: 0 OpenPIC Level keywest i2c
/proc/interrupts: 47: 0 OpenPIC Level GPIO1 ADB
/proc/interrupts: 55: 0 OpenPIC Edge NMI - XMON
/proc/interrupts: 63: 2460 OpenPIC Level ohci_hcd:usb2, ohci_hcd:usb3, ehci_hcd:usb4
/proc/interrupts: BAD: 64614
/proc/meminfo: MemTotal: 515128 kB
/proc/meminfo: MemFree: 50188 kB
/proc/meminfo: Buffers: 10376 kB
/proc/meminfo: Cached: 399400 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 238252 kB
/proc/meminfo: Inactive: 183360 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 515128 kB
/proc/meminfo: LowFree: 50188 kB
/proc/meminfo: SwapTotal: 0 kB
/proc/meminfo: SwapFree: 0 kB
/proc/meminfo: Dirty: 8824 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 14124 kB
/proc/meminfo: Slab: 34636 kB
/proc/meminfo: CommitLimit: 257564 kB
/proc/meminfo: Committed_AS: 53764 kB
/proc/meminfo: PageTables: 344 kB
/proc/meminfo: VmallocTotal: 448172 kB
/proc/meminfo: VmallocUsed: 25988 kB
/proc/meminfo: VmallocChunk: 420776 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=1000 Version=1965
/proc/bus/input/devices: N: Name="HID 05ac:1000"
/proc/bus/input/devices: P: Phys=usb-0001:10:1a.0-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=e080ffdf 1cfffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=1000 Version=1965
/proc/bus/input/devices: N: Name="HID 05ac:1000"
/proc/bus/input/devices: P: Phys=usb-0001:10:1a.0-1/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=mouse1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=1f0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c00e Version=1110
/proc/bus/input/devices: N: Name="Logitech USB-PS/2 Optical Mouse"
/proc/bus/input/devices: P: Phys=usb-0001:10:1b.0-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input3
/proc/bus/input/devices: H: Handlers=mouse2
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=413c Product=2003 Version=0100
/proc/bus/input/devices: N: Name="Dell Dell USB Keyboard"
/proc/bus/input/devices: P: Phys=usb-0001:10:1b.1-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input15
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=10000 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: 41: dmidecode: not found
==============================================
Installer status file:
==============================================
Package: scsi-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: scsi-modules
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di, cdrom-core-modules-2.6.15-1-powerpc-di, firmware-modules-2.6.15-1-powerpc-di
Description: SCSI drivers
Package: ide-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: ide-modules
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Description: IDE drivers
Package: preseed-common
Status: install ok installed
Version: 1.14
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.03
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.35)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.03
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-2
Description: GNU C Library: NSS helper for DNS - udeb
Package: pcmcia-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: pcmcia-modules
Depends: firmware-modules-2.6.15-1-powerpc-di
Description: Common PCMCIA drivers
Package: cdrom-checker
Status: install ok unpacked
Version: 1.06
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.17
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2002.12.04dbs-52.2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.08
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.10
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38)
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.23
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: Miscellaneous utilities for the debian installer
Package: pcmcia-storage-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.15-1-powerpc-di, cdrom-core-modules-2.6.15-1-powerpc-di, pcmcia-modules-2.6.15-1-powerpc-di
Description: PCMCIA storage drivers
Package: usb-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: usb-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: USB support
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.97
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.51
Description: Newt frontend for Debian Configuration Management System
Package: usb-storage-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: usb-storage-modules
Depends: scsi-core-modules-2.6.15-1-powerpc-di, usb-modules-2.6.15-1-powerpc-di
Description: USB storage support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.29
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.085-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: input-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: input-modules
Depends: kernel-image-2.6.15-1-powerpc-di, usb-modules-2.6.15-1-powerpc-di
Description: Input devices support
Package: kernel-image-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: kernel-image
Description: Linux kernel binary image for the Debian installer
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-1
Depends: libc-udeb
Description: Free Implementation of the Unicode BiDi algorithm
Package: scsi-core-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: scsi-core-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Core SCSI subsystem
Package: rescue-check
Status: install ok unpacked
Version: 1.3
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.10-2
Provides: editor
Depends: libc-udeb, libslang2-udeb
Description: free Pico clone with some new features - tiny build
Package: scsi-common-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: scsi-common-modules
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di, cdrom-core-modules-2.6.15-1-powerpc-di
Description: Very common SCSI drivers
Package: cdebconf-udeb
Status: install ok installed
Version: 0.97
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36), libtextwrap1 (>> 0.01-0)
Description: Debian Configuration Management System (C-implementation)
Package: firmware-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: firmware-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Firmware request modules
Package: load-cdrom
Status: install ok installed
Version: 1.08
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 14
Package: floppy-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: floppy-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Floppy driver
Package: iso-3166-udeb
Status: install ok installed
Version: 0.49-1
Description: provides iso_3166.tab file
Package: fs-common-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: fs-common-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Common filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.08
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.01-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.14
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.33
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.12
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.23
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.21
Depends: cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 012-4
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs1
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.1.11-15.3
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2002.12.04dbs-52.2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.23
Description: Terminfo entries needed by newt/slang in debian installer
Package: cdrom-core-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: cdrom-core-modules
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di, ide-modules-2.6.15-1-powerpc-di
Description: CDROM support
Package: hw-detect
Status: install ok installed
Version: 1.33
Depends: rootskel (>= 0.54), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.15)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.38
Provides: libdebian-installer4
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: eject-udeb
Status: install ok unpacked
Version: 2.1.4-1
Depends: libc6 (>= 2.3.5-1), debconf (>= 0.5) | debconf-2.0
Description: ejects CDs from d-i menu
Installer-Menu-Item: 960
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.14
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.5
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.97
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.14
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libsysfs1-udeb
Status: install ok unpacked
Version: 1.3.0-7
Provides: libsysfs1
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: firewire-core-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.15-1-powerpc-di, kernel-image-2.6.15-1-powerpc-di
Description: Core FireWire drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.97
Provides: libdebconfclient0
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.12
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 14
Package: debian-installer
Status: install ok installed
Version: powerpc-cdrom-20060225
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: choose-mirror
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: apt-mirror-setup
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 472
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.47
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38), configured-network
Description: Choose mirror to install from
Installer-Menu-Item: 23
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.8
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 416
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 15
Package: ext2-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: ext2-modules
Description: EXT2 filesystem support
This package contains the EXT2 filesystem module for the Linux kernel.
Package: ext3-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: hfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: hfs-modules
Description: HFS filesystem support
This package contains the HFS and HFS+ filesystem modules for the Linux kernel.
Package: jfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 264
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1148
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.8-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2068
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-2
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.03-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27+28pre14-1
Provides: libiw28
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 356
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-2
Depends: libc6 (>= 2.3.5-1), libuuid1
Provides: libparted1.6-13
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: loop-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.02-1
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02 (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: lvmcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>= 1.15)
Description: lvmcfg without the main menu item
Package: mac-fdisk-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Version: 0.1-13
Depends: libc6 (>= 2.3.5-1)
Description: Apple disk partition manipulation tool
The fdisk utilities from the MkLinux project, adopted for Linux/m68k.
Mac-fdisk allows you to create and edit the partition table of a disk.
It supports only the Apple partition format used on Macintosh and PowerMac,
use pmac-fdisk for PC partition format disks as used on PowerPC machines.
Mac-fdisk is an interactive tool with a menu similar to PC fdisk, supported
options are somewhat different from PC fdisk due to the differences in
partition format.
.
This is a minimal mac-fdisk package used by the debian-installer.
Package: md-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 112
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 1.12.0-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux md device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 312
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 1.14
Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-1
Depends: libc6 (>= 2.3.2.ds1-4), libuuid1
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 668
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), libiw28-udeb, cdebconf-udeb, dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok half-configured
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, nic-shared-modules-2.6.15-1-powerpc-di, firmware-modules-2.6.15-1-powerpc-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, nic-shared-modules-2.6.15-1-powerpc-di, firmware-modules-2.6.15-1-powerpc-di, firewire-core-modules-2.6.15-1-powerpc-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 828
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, nic-shared-modules-2.6.15-1-powerpc-di, nic-extra-modules-2.6.15-1-powerpc-di, pcmcia-modules-2.6.15-1-powerpc-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.12
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-2
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 73), partman-auto (>= 46), partman-lvm, di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 776
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 78.1
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 508
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 120
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 16
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: lvmcfg-utils, lvm2-udeb, partman-base (>= 73), di-utils (>= 1.14)
Description: Add to partman support for LVM
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 23
Depends: mdadm-udeb, mdcfg-utils, partman-base (>= 73)
Description: Add to partman support for MD
Package: partman-newworld
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 120
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, hfs-modules
Description: partman support for new-world PowerMac boot partitions
This package provides the 'newworld' partition use method. The yaboot
boot loader used on PCI-era PowerMac systems requires a special
Apple_Bootstrap partition, created by this method.
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 38
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 42
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 28
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 24
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.05
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: prebaseconfig
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: archdetect, base-installer, created-fstab, bootable-system
Description: Finish the installation and reboot
finish the installation and reboot
Installer-Menu-Item: 78
Package: reiserfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 396
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: scsi-modules-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.8
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.0
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27+28pre14-1
Depends: libiw28-udeb (= 27+28pre14-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 260
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.7.14-1
Depends: libc6 (>= 2.3.5-1), libuuid1
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: yaboot-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1.5
Depends: kernel-installer, partconf-find-partitions (>= 1.08), di-utils (>= 1.15), di-utils-mapdevfs, os-prober, archdetect
Provides: bootable-system
Description: Install yaboot on a hard disk
This package will install yaboot on the hard disk.
Installer-Menu-Item: 73
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: powerpc (ppc)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Reply to: