[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#345999: marked as done (installation-report: Fails to detect CD)

Your message dated Tue, 21 Feb 2006 06:27:59 +0100
with message-id <20060221052758.GG26541@djedefre.onera>
and subject line Bug#345999: installation-report: Fails to detect CD
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-report
Severity: important

Boot method: Both CD and Netinst, from testing
Image version: 02/01/2006 (dd/mm/yyyy)
Date: 03/01/2006

Machine: Dell Inspiron 630m
Processor: Intel Pentium M 1.86
Memory: 1Gb
Partitions: 
N/A

Output of lspci and lspci -n:

-- lspci --
0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2590 (rev 03)
0000:00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2592
(rev 03)
0000:00:02.1 Display controller: Intel Corp.: Unknown device 2792 (rev
03)
0000:00:1b.0 0403: Intel Corp. I/O Controller Hub Audio (rev 03)
0000:00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port
0 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port
1 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev
03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 2653 (rev 03)
0000:02:00.0 Ethernet controller: Broadcom Corporation BCM5705M
10/100/1000Base T (rev 02)
0000:02:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832
0000:02:01.1 0805: Ricoh Co Ltd: Unknown device 0822 (rev 19)
0000:02:01.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev
01)
0000:02:01.3 System peripheral: Ricoh Co Ltd: Unknown device 0592 (rev
0a)
0000:02:01.4 System peripheral: Ricoh Co Ltd: Unknown device 0852 (rev
05)
0000:02:03.0 Network controller: Intel Corp. Intel(R) PRO/Wireless
2200BG (rev 05)
-- lspci --

-- lspci -n --
0000:00:00.0 0600: 8086:2590 (rev 03)
0000:00:02.0 0300: 8086:2592 (rev 03)
0000:00:02.1 0380: 8086:2792 (rev 03)
0000:00:1b.0 0403: 8086:2668 (rev 03)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1c.1 0604: 8086:2662 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev d3)
0000:00:1f.0 0601: 8086:2641 (rev 03)
0000:00:1f.2 0101: 8086:2653 (rev 03)
0000:02:00.0 0200: 14e4:170c (rev 02)
0000:02:01.0 0c00: 1180:0832
0000:02:01.1 0805: 1180:0822 (rev 19)
0000:02:01.2 0880: 1180:0843 (rev 01)
0000:02:01.3 0880: 1180:0592 (rev 0a)
0000:02:01.4 0880: 1180:0852 (rev 05)
0000:02:03.0 0280: 8086:4220 (rev 05)
-- lspci -n --

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [E]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:

The installer fails to detect the CD drive (actually a DVD+RW drive, a
Sony DW-Q58A). The drive is a PCI IDE drive. The thing is, that an old
Sarge/Testing image (date 01/08/2004, ie: before Sarge was released)
correctly detects the drive, and happily installs Debian on that Laptop.

--- End Message ---
--- Begin Message --- 
Quoting Felipe Sateler (fsateler@gmail.com):
> On Wednesday 11 January 2006 01:34, Felipe Sateler wrote:
> > On Wednesday 11 January 2006 01:23, Frans Pop wrote:
> > > Felipe, could you send us the output of 'lsmod' for both the old
> > > installer (that worked) and the new one?
> >
> > That might be a problem, because the laptop is not currently here (it
> > should back be in a couple of days). 
> 
> Unfortunately, I could never get a hold of that laptop for enough time to 
> actually do that, and now the laptop is completely out of my reach, so I 
> won't be able to check lsmod's output. Sorry.


Given that the needed information is mandatory to process the bug
report, we have no choice but closing the bug report, then

--- End Message ---
Reply to: