[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#350222: installation report Dell PE 1600



Package: installation-reports

Boot method: USB Stick
Image version:
http://ftp.debian.org/debian/dists/testing/main/installer-i386/beta1/images/hd-media/
Date: 27012006

Machine: Dell PowerEdge 1600 SC
Processor: Pentium XEON 2,4 Ghz
Mem: 1024 MB
uname -a: Linux morpheus 2.4.27-2-686 #1 Wed Nov 30 21:55:37 JST 2005
i686 GNU/Linux

Partitions:  

Disk /dev/hda: 120.0 GB, 120000000000 bytes
255 heads, 63 sectors/track, 14589 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1               1           4       32098+  de  Dell Utility
/dev/hda2   *           5          10       48195   83  Linux
/dev/hda3              11         132      979965   83  Linux
/dev/hda4             133       14589   116125852+   5  Extended
/dev/hda5             133         740     4883728+  83  Linux
/dev/hda6             741        1348     4883728+  83  Linux
/dev/hda7            1349        1470      979933+  82  Linux swap /
Solaris
/dev/hda8            1471       14589   105378336   8e  Linux LVM

Disk /dev/hdb: 120.0 GB, 120000000000 bytes
255 heads, 63 sectors/track, 14589 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hdb1               1        3648    29302528+  8e  Linux LVM
/dev/hdb3            3649       14589    87883582+  83  Linux

Output of lspci and lspci -n:

0000:00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 32)
0000:00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge
0000:00:02.0 Ethernet controller: Intel Corporation 82540EM Gigabit
Ethernet Controller (rev 02)
0000:00:04.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet
Pro 100] (rev 0d)
0000:00:06.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02)
0000:00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL
(rev 27)
0000:00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
0000:00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
0000:00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev
05)
0000:00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
0000:00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:01:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030
PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)


0000:00:00.0 0600: 1166:0017 (rev 32)
0000:00:00.1 0600: 1166:0017
0000:00:02.0 0200: 8086:100e (rev 02)
0000:00:04.0 0200: 8086:1229 (rev 0d)
0000:00:06.0 0100: 9005:0081 (rev 02)
0000:00:0e.0 0300: 1002:4752 (rev 27)
0000:00:0f.0 0600: 1166:0201 (rev 93)
0000:00:0f.1 0101: 1166:0212 (rev 93)
0000:00:0f.2 0c03: 1166:0220 (rev 05)
0000:00:0f.3 0601: 1166:0225
0000:00:10.0 0600: 1166:0101 (rev 05)
0000:00:10.2 0600: 1166:0101 (rev 05)
0000:01:04.0 0100: 1000:0030 (rev 07)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Installed system ok:    [O]

Comments/Problems:

All OK

Regards,

Michel

-- 






Reply to: