Bug#315099: installation-reports
Package: installation-reports
Debian-installer-version: 3.1r0, from http://cdimage.debian.org/debian-cd/3.1_r0a/i386/iso-cd/
uname -a: Linux debian 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005 i686 GNU/Linux
Date: 20-Jun-2005
Method: Install from netinstall CD (debian-31r0a-i386-netinst.iso)
Machine: Hand assembled PC
Processor: VIA C3 Samuel 2
Memory: 288 MB
Root Device: IDE, root=/dev/hda3
Root Size/partition table:
Filesystem Size Type Mounted on
/dev/hda1 30M ext3 /boot
/dev/hda2 1G swap
/dev/hda3 9.4G reiserFS /
/dev/hda4 67G reiserFS /home
Output of lspci and lspci -n:
$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
0000:00:0a.0 Communication controller: Intel Corp. 536EP Data Fax Modem
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a)
$ lspci -n
0000:00:00.0 0600: 1106:0601 (rev 05)
0000:00:01.0 0604: 1106:8601
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 1a)
0000:00:07.4 0680: 1106:3057 (rev 40)
0000:00:07.5 0401: 1106:3058 (rev 50)
0000:00:0a.0 0780: 8086:1040
0000:00:0e.0 0200: 10ec:8139 (rev 10)
0000:01:00.0 0300: 1023:8500 (rev 6a)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Only two modules (i.e. shpchp and pciehp) had to be blacklisted to get rid of the following messages (copied from dmesg):
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
Otherwise no problems at all:)
Reply to: