Bug#311913: installation-reports
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Package: installation-reports
Debian-installer-version: June 3rd 2005:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/debian-testing-i386-netinst.iso
uname -a: Linux psychotic 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005
i686 GNU/Linux
Date: Sat Jun 4 10:20:32 CEST 2005
Method: Used the netinst image, booted from it, configured it and
installed from:
deb ftp://ftp.belnet.be/debian/ unstable main
deb-src ftp://ftp.belnet.be/debian/ unstable main
Machine: Acer Aspire 1511 LMi laptop
Processor: AMD Athlon64 3000+
Memory: 512 Mb, no swap partition added
Root Device:
ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
hda: IC25N060ATMR04-0, ATA DISK drive
hda: attached ide-disk driver.
hda: 117210240 sectors (60012 MB) w/7884KiB Cache, CHS=7296/255/63,
UDMA(100)
Root Size/partition table:
Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 6020 48355618+ c W95 FAT32 (LBA)
/dev/hda2 6021 7295 10241437+ 83 Linux
/dev/hda3 7296 7296 8032+ 1e Hidden W95
FAT16 (LBA)
Command (m for help):
A partition for shared data with windows
A reiser root filesystem
An acer partition
Output of lspci and lspci -n:
psychotic:~# lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3
Audio (rev
a2)
0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2)
0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0348
(rev a1)
0000:02:06.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5788 Gigabit
Ethernet (rev 03)
0000:02:07.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus
Controlle
r (rev 02)
0000:02:07.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394
Controlle
r
0000:02:08.0 Network controller: Broadcom Corporation BCM4306
802.11b/g Wireless
LAN Controller (rev 03)
psychotic:~# lspci -n
0000:00:00.0 0600: 10de:00d1 (rev a4)
0000:00:01.0 0601: 10de:00d0 (rev a6)
0000:00:01.1 0c05: 10de:00d4 (rev a4)
0000:00:02.0 0c03: 10de:00d7 (rev a5)
0000:00:02.1 0c03: 10de:00d7 (rev a5)
0000:00:02.2 0c03: 10de:00d8 (rev a2)
0000:00:06.0 0401: 10de:00da (rev a2)
0000:00:06.1 0703: 10de:00d9 (rev a2)
0000:00:08.0 0101: 10de:00d5 (rev a5)
0000:00:0a.0 0604: 10de:00dd (rev a2)
0000:00:0b.0 0604: 10de:00d2 (rev a4)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:0348 (rev a1)
0000:02:06.0 0200: 14e4:169c (rev 03)
0000:02:07.0 0607: 104c:ac44 (rev 02)
0000:02:07.1 0c00: 104c:8029
0000:02:08.0 0280: 14e4:4320 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [OK]
Configure network HW: [OK]
Config network: [OK] (dhcp)
Detect CD: [OK]
Load installer modules: [OK]
Detect hard drives: [OK]
Partition hard drives: [OK] (why couldn't i specify the mount point
for an existing fat32 ?)
Create file systems: [OK]
Mount partitions: [OK]
Install base system: [OK]
Install boot loader: [OK]
Reboot: [OK]
Comments/Problems:
Installation went perfectly:
Boot from CD.
Regular boot.
The machine was a Gentoo machine built for AMD64 arch, but now I
decided to use
it as a regular x86 Debian.
- ----------------------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCoWVRzwVHEAxn05MRAtJjAJ9UDnHPnz89S9+Xv4+kl7waYipsQQCgkcTZ
qOLAFM/CekXsZbVX+bopwWo=
=AMqi
-----END PGP SIGNATURE-----
Reply to: