Bug#289480: Package: installation-reports
Package: installation-reports
Debian-installer-version: 8.1.2005
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i386-netinst.iso
uname -a: Linux mwarp 2.6.8-1-k7 #1 Thu Nov 25 04:13:37 UTC 2004 i686
GNU/Linux
Date: 8.1.2005 20.00-23.00 or something gmt+2
Method: Boot from debian-installer rc2 cd, partitioned etc, all went
normally. Then boot and base-config until apt method question. Changed
console and installed PPPoE with pppoeconf, and then selected apt method
(ftp from ftp.jyu.fi). Then selected 4 GiB or something packages and
went to sauna :) No proxy used.
Machine: Clone pc, brand ARC
Processor: AMD Athlon XP 2600+ (T-bred)
Memory: 1024 MiB ddr333
Root Device: /dev/hda: Maxtor 6Y120L0
Root Size/partition table:
/boot:
/dev/hda2 1 13 104391 83 Linux
not mounted:
/dev/hda1 14 11336 90951966 7 HPFS/NTFS
/ (root):
/dev/hda3 * 11337 14796 27792450 83 Linux
swap
/dev/hda4 14797 14946 1204875 f W95 Ext'd (LBA)
/dev/hda5 14797 14946 1204843+ 82 Linux swap
Output of lspci and lspci -n:
markuz@mwarp:~$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600
AGP] Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:00:0e.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 04)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc R300 AD
[Radeon 9500 Pro]
0000:01:00.1 Display controller: ATI Technologies Inc R300 AD [Radeon
9500 Pro] (Secondary)
markuz@mwarp:~$ lspci -n
0000:00:00.0 0600: 1106:3189
0000:00:01.0 0604: 1106:b168
0000:00:0b.0 0400: 109e:036e (rev 11)
0000:00:0b.1 0480: 109e:0878 (rev 11)
0000:00:0c.0 0401: 1274:5880 (rev 02)
0000:00:0e.0 0c00: 11c1:5811 (rev 04)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 1002:4144
0000:01:00.1 0380: 1002:4164
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I still have not managed to install my soundcard.. But i'm working on
it. According to alsamixer my soundcard is installed and working, but no
software can use it.
Sarge and debian-installer are great, I tested debian-installer first
time ~year ago or something, now I have two servers and one desktop
running sarge, today I think i'm going to configure one desktop more.
Hope that you'll make it to stable as soon as possible.
--
Markus
markus@vtspartio.net
Reply to: