Bug#344268: installation reports: d-i cannot detect CDROM in Dell Inspiron 9300
Package: installation-reports
Severity: normal
INSTALL REPORT
d-i cannot detect the CDROM on a DELL Inspiron 9300.
Debian-installer-version:
debian-testing-i386-netinst.iso fetched at 2005-12-20 from
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/
uname -a:
Linux debian 2.6.14-2-386 #2 Fri Dec 9 10:02:52 UTC 2005 i686 unknown
Date:
Wed, 21 Dec 2005 10:10:24 +0100
Method:
Machine: Dell Inspiron 9300
Processor:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.86GHz
stepping : 8
cpu MHz : 1862.781
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2
bogomips : 3678.20
Memory: 1024Mb
Root Device:
ata_piix SATA 60Mb
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: TOSHIBA MK6026GA Rev: PA20
Type: Direct-Access ANSI SCSI revision: 05
Root Size/partition table: N/A
Output of (lspci, lspci -n)|sort from Ubuntu Breezy:
0000:00:00.0 0600: 8086:2590 (rev 03)
0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
0000:00:01.0 0604: 8086:2591 (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. Mobile Memory Controller Hub PCI Express
Port (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #1 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #2 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #3 (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #4 (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev d3)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 0703: 8086:266d (rev 03)
0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem
Controller (rev 03)
0000:00:1f.0 0601: 8086:2641 (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev
03)
0000:00:1f.2 0101: 8086:2653 (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev
03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
0000:01:00.0 0300: 10de:00c8 (rev a2)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00c8
(rev a2)
0000:03:00.0 0200: 14e4:170c (rev 02)
0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX
(rev 02)
0000:03:01.0 0607: 1180:0476 (rev b3)
0000:03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:03:01.1 0c00: 1180:0552 (rev 08)
0000:03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev
08)
0000:03:01.2 0805: 1180:0822 (rev 17)
0000:03:01.2 0805: Ricoh Co Ltd: Unknown device 0822 (rev 17)
0000:03:03.0 0280: 8086:4220 (rev 05)
0000:03:03.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [ ]
Detect hard drives: [O] HD detected before language selection
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
As stated before d-i cannot detect de CDROM. However Ubuntu Hoary (2.6.10) and
Breezy installers works fine.
HD is detected at a very early stage, before any user interaction, both sata
controllers are detected, see dmesg output below.
Comparing lsmod output from d-i and Ubuntu,see below. I found that the module
loading order is diferent. Ubuntu loads ata_piix before pcmcia and ieee1394,
don't know if this is important so, I've tried booting with
hw-detect/start_pcmcia=false, debian-installer/probe/usb=false and desperatly
debian-installer/probe/pcmcia=false with no luck. Maybe ata_piix in d-i is
diferent to Ubuntu?.
Output of lsmod:
Module Size Used by
ide_cd 39300 0
sr_mod 17188 0
cdrom 36896 2 ide_cd,sr_mod
sd_mod 18192 2
generic 4612 0 [permanent]
ide_core 119772 2 ide_cd,generic
ahci 12036 0
vga16fb 12616 2
vgastate 9856 1 vga16fb
usbhid 36192 0
usbkbd 6784 0
thermal 13576 0
processor 23100 1 thermal
fan 4868 0
ata_piix 9476 1
libata 45960 2 ahci,ata_piix
ohci1394 32820 0
ieee1394 93112 1 ohci1394
yenta_socket 25612 0
rsrc_nonstatic 12800 1 yenta_socket
pcmcia_core 39440 2 yenta_socket,rsrc_nonstatic
ehci_hcd 32392 0
scsi_mod 132200 4 sr_mod,sd_mod,ahci,libata
uhci_hcd 30736 0
usbcore 114688 5 usbhid,usbkbd,ehci_hcd,uhci_hcd
lsmod output booting with Ubuntu Breezy:
Module Size Used by
fbcon 34176 68
tileblit 2560 1 fbcon
font 8448 1 fbcon
bitblit 5248 1 fbcon
vga16fb 12232 2
vgastate 8320 1 vga16fb
vesafb 8088 0
cfbcopyarea 4480 2 vga16fb,vesafb
cfbimgblt 2944 2 vga16fb,vesafb
cfbfillrect 3840 2 vga16fb,vesafb
softcursor 2432 2 vga16fb,vesafb
usbserial 26984 0
usbkbd 6784 0
thermal 13192 0
processor 23100 1 thermal
fan 4740 0
mousedev 10912 0
usb_storage 64704 0
usbhid 30688 0
ide_core 125268 1 usb_storage
sg 33696 0
sr_mod 15652 0
cdrom 33952 1 sr_mod
ohci1394 30644 0
ieee1394 90936 1 ohci1394
sd_mod 17424 2
yenta_socket 22540 0
rsrc_nonstatic 12032 1 yenta_socket
pcmcia_core 44932 2 yenta_socket,rsrc_nonstatic
ahci 11268 0
ata_piix 9476 1
libata 47876 2 ahci,ata_piix
scsi_mod 124872 6 usb_storage,sg,sr_mod,sd_mod,ahci,libata
ehci_hcd 29448 0
uhci_hcd 28048 0
usbcore 104188 7
usbserial,usbkbd,usb_storage,usbhid,ehci_hcd,uhci_hcd
evdev 9088 0
unix 24624 8
Contents of /proc/scsi/scsi booting with Ubuntu Breezy (2.6.12-9-686):
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: TOSHIBA MK6026GA Rev: PA20
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: DVD+-RW DW-D56A Rev: PDS7
Type: CD-ROM ANSI SCSI revision: 05
Output of dmesg (just before language selection):
pnp: 00:07: ioport range 0x900-0x90f has been reserved
pnp: 00:07: ioport range 0x910-0x91f has been reserved
pnp: 00:07: ioport range 0x920-0x92f has been reserved
pnp: 00:07: ioport range 0x930-0x93f has been reserved
pnp: 00:07: ioport range 0x940-0x97f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dd000000-dfefffff
PREFETCH window: c0000000-cfffffff
PCI: Bus 4, cardbus bridge: 0000:03:01.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: dcf00000-dcffffff
PREFETCH window: 50000000-51ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
Simple Boot Flag at 0x79 set to 0x1
audit: initializing netlink socket (disabled)
audit(1135109103.500:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 201
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 11412K size 1024 blocksize
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
LID PBTN PCI0 USB0 USB1 USB2 USB4 USB3 MODM PCIE
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 240k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
ieee1394: Initialized config rom entry `ip1394'
libata version 1.12 loaded.
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000bf60
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (46 C)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000bf40
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000bf20
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 169, io mem 0xffa80800
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:03:01.0 [1028:0189]
ata_piix version 1.04
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
Yenta: ISA IRQ mask 0x04b8, PCI irq 177
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xdcf00000 - 0xdcffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 209
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[dcffc800-dcffcfff]
Max Packet=[2048]
ata1: dev 0 cfg 49:2f00 82:7c6b 83:5b08 84:4003 85:7c69 86:1a08 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 117210240 sectors:
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: TOSHIBA MK6026GA Rev: PA20
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
ata2: dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc0002dc9d030]
Reply to: